mpls-linux-general

[mpls-linux-general] MPLS beginner

[D. M. <acu...@gm...>]

Hello everybody!

I've just started to use MPLS and I have a little problem. This is my output
for the console:

root@orange6:~# mpls labelspace set dev eth0 labelspace 0
root@orange6:~# mpls ilm add label gen 2001 labelspace 0
RTNETLINK answers: Cannot allocate memory
root@orange6:~# mpls nhlfe show
NHLFE entry key 0x00000002 mtu 0 propagate_ttl
         (0 bytes, 0 pkts)

Anybody knows what's happening? something related to the modules?

I am using MPLS 1.956 on the linux kernel 2.6.20.

Thank you all,

David

Re: [mpls-linux-general] MPLS beginner

[Adrian P. <adr...@gm...>]

If you've installed mpls for fedora (from the rpms from the site), make sure
you load the mpls4 module (modprobe mpls4) before issuing mpls commands.


On Thu, Jun 5, 2008 at 8:22 PM, David Martínez <acu...@gm...>
wrote:

> Hello everybody!
>
> I've just started to use MPLS and I have a little problem. This is my
> output for the console:
>
> root@orange6:~# mpls labelspace set dev eth0 labelspace 0
> root@orange6:~# mpls ilm add label gen 2001 labelspace 0
> RTNETLINK answers: Cannot allocate memory
> root@orange6:~# mpls nhlfe show
> NHLFE entry key 0x00000002 mtu 0 propagate_ttl
>          (0 bytes, 0 pkts)
>
> Anybody knows what's happening? something related to the modules?
>
> I am using MPLS 1.956 on the linux kernel 2.6.20.
>
> Thank you all,
>
> David
>
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> mpls-linux-general mailing list
> mpl...@li...
> https://lists.sourceforge.net/lists/listinfo/mpls-linux-general
>
>