Thread: [mpls-linux-general] mpls_bogus_output
Status: Beta
Brought to you by:
jleu
Menu
▾
▴
mpls-linux-general
|
From: Homer S. <h_j...@ma...> - 2002-11-15 22:13:59
|
Hi all, I'm trying to set up a network to test first intserv/rsvp and then mpls features. Not to have to change the my configuration, I'm using linux-mpls + rsvpd-TE deamon (from Ghent University). My network is very simple : 2 hosts (clients) connected to a central router. I've succeeded in making the software work with kernel 2.4.17 (and rsvpd 0.63) but things seems not that simple with a kernel 2.4.19 configuration. I've compiled this kernel on a development machine and installed it on my the hosts. There is no problem to make the client work but I cannot have the router start correctly. It's boot process is ok but there are some problems with the network services. The only noticeable differences between the router and the hosts are the number of eth accesses (4 instead of 1) and the use of zebra (version 0.92a) on this machine. It seems that zebra doesn't start and dmesg log contains plenty of "mpls_bogus_output" (see bellow). Did anybody heard about such problems ? Thanks :) Eric PS : dmesg log : ... parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.htmleepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <sa...@sa...> and others PCI: Found IRQ 11 for device 01:08.0 eth0: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller, 00:03:47:69:0C:5F, IRQ 11. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). PCI: Found IRQ 11 for device 01:0d.0 eth1: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3), 00:D0:B7:49:0D:B2, IRQ 11. Board assembly 748565-005, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xdbd8681d). PCI: Found IRQ 9 for device 01:0c.0 PCI: Sharing IRQ 9 with 00:1f.3 PCI: Sharing IRQ 9 with 00:1f.5 eth2: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2), 00:D0:B7:49:0F:41, IRQ 9. Board assembly 748565-005, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xdbd8681d). PCI: Found IRQ 10 for device 01:0b.0 PCI: Sharing IRQ 10 with 00:1f.4 eth3: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:49:0C:0C, IRQ 10. Board assembly 748565-005, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xdbd8681d). mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 202M agpgart: agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 memory : cd26e3e0 memory : 00000000 memory : cd26e420 mpls_bogus_output: 192.168.21.2 -> 193.252.19.244, eth0 mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 memory : cd26e4a0 memory : 00000000 memory : cd26e4e0 mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.21.2 -> 193.252.19.244, eth0 mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.38.10, eth0 mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 mpls_bogus_output: 192.168.25.2 -> 216.239.38.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.38.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.36.10, eth0 mpls_bogus_output: 192.168.25.2 -> 216.239.34.10, eth0 mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 (and so on...) le & ready to mingle? lavalife.com: Where singles click. Free to Search! http://www.lavalife.com/wp.epl?a=2716 -- __________________________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Single & ready to mingle? lavalife.com: Where singles click. Free to Search! http://www.lavalife.com/wp.epl?a=2716 |
|
From: James R. L. <jl...@mi...> - 2002-12-04 03:20:45
|
See comment inline. On Fri, Nov 15, 2002 at 05:12:51PM -0500, Homer Simpson wrote: > Hi all, > > I'm trying to set up a network to test first intserv/rsvp > and then mpls features. Not to have to change the my configuration, > I'm using linux-mpls + rsvpd-TE deamon (from Ghent University). > > My network is very simple : 2 hosts (clients) connected to a central > router. I've succeeded in making the software work with kernel 2.4.17 > (and rsvpd 0.63) but things seems not that simple with a > kernel 2.4.19 configuration. I've compiled this kernel on a > development machine and installed it on my the hosts. There is no > problem to make the client work but I cannot have the router start > correctly. It's boot process is ok but there are some problems with > the network services. The only noticeable differences between the > router and the hosts are the number of eth accesses (4 instead of > 1) and the use of zebra (version 0.92a) on this machine. It seems > that zebra doesn't start and dmesg log contains plenty of > "mpls_bogus_output" (see bellow). The mpls_bogus_output is due to the IPv4 layer specifing an outlabel index that doesn't exist. Let is know if your still having problems. > Did anybody heard about such problems ? > > Thanks :) > > Eric > > PS : dmesg log : > ... > parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] > eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.htmleepro100.c: > $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <sa...@sa...> > and others > PCI: Found IRQ 11 for device 01:08.0 > eth0: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller, > 00:03:47:69:0C:5F, IRQ 11. Board assembly 000000-000, Physical > connectors present: RJ45 > Primary interface chip i82555 PHY #1. > General self-test: passed. > Serial sub-system self-test: passed. > Internal registers self-test: passed. > ROM checksum self-test: passed (0x04f4518b). > PCI: Found IRQ 11 for device 01:0d.0 > eth1: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#3), > 00:D0:B7:49:0D:B2, IRQ 11. > Board assembly 748565-005, Physical connectors present: RJ45 > Primary interface chip i82555 PHY #1. > General self-test: passed. > Serial sub-system self-test: passed. > Internal registers self-test: passed. > ROM checksum self-test: passed (0xdbd8681d). > PCI: Found IRQ 9 for device 01:0c.0 > PCI: Sharing IRQ 9 with 00:1f.3 > PCI: Sharing IRQ 9 with 00:1f.5 > eth2: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2), > 00:D0:B7:49:0F:41, IRQ 9. > Board assembly 748565-005, Physical connectors present: RJ45 > Primary interface chip i82555 PHY #1. > General self-test: passed. > Serial sub-system self-test: passed. > Internal registers self-test: passed. > ROM checksum self-test: passed (0xdbd8681d). > PCI: Found IRQ 10 for device 01:0b.0 > PCI: Sharing IRQ 10 with 00:1f.4 > eth3: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:49:0C:0C, > IRQ 10. > Board assembly 748565-005, Physical connectors present: RJ45 > Primary interface chip i82555 PHY #1. > General self-test: passed. > Serial sub-system self-test: passed. > Internal registers self-test: passed. > ROM checksum self-test: passed (0xdbd8681d). > mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 202M > agpgart: agpgart: Detected an Intel i815 Chipset. > agpgart: AGP aperture is 64M @ 0xf8000000 > memory : cd26e3e0 > memory : 00000000 > memory : cd26e420 > mpls_bogus_output: 192.168.21.2 -> 193.252.19.244, eth0 > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 > mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 > memory : cd26e4a0 > memory : 00000000 > memory : cd26e4e0 > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 > mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.21.2 -> 193.252.19.244, eth0 > mpls_bogus_output: 192.168.16.1 -> 192.168.7.2, ? > mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.38.10, eth0 > mpls_bogus_output: 192.168.18.2 -> 192.168.7.2, eth2 > mpls_bogus_output: 192.168.25.2 -> 216.239.38.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.38.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.32.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.36.10, eth0 > mpls_bogus_output: 192.168.25.2 -> 216.239.34.10, eth0 > mpls_bogus_output: 192.168.5.2 -> 192.168.7.2, eth3 > (and so on...) > le & ready to mingle? lavalife.com: Where singles click. Free to > Search! > http://www.lavalife.com/wp.epl?a=2716 > > -- > __________________________________________________________ > Sign-up for your own FREE Personalized E-mail at Mail.com > http://www.mail.com/?sr=signup > > Single & ready to mingle? lavalife.com: Where singles click. Free to Search! > http://www.lavalife.com/wp.epl?a=2716 > > > > ------------------------------------------------------- > This sf.net email is sponsored by: To learn the basics of securing > your web site with SSL, click here to get a FREE TRIAL of a Thawte > Server Certificate: http://www.gothawte.com/rd524.html > _______________________________________________ > mpls-linux-general mailing list > mpl...@li... > https://lists.sourceforge.net/lists/listinfo/mpls-linux-general -- James R. Leu |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X