Thread: [mpls-linux-general] Re: [quagga-dev 1233] RSVP-TE, OSPF-TE free source code
Status: Beta
Brought to you by:
jleu
Menu
▾
▴
mpls-linux-general
|
From: James R. L. <jl...@mi...> - 2004-06-01 14:39:22
|
I'd like to work with you to clean up the layout of the code, port to quagga, and integrate with my MPLS infrastructure work. If you are interested in such an effort, please respond to the list, otherwise I will begin the effort myself. Thank you for your contribution. BTW I didn't see a license or copyright in any of the files. You will probably want to do that. (I've CC'd the mpls-linux mailing list) -- James R. Leu jl...@mi... On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote: > Hi. > I'd like to contribute to the Zebra users & developers' community several software > modules that I've developed recently: > RSVP-TE, TE application, TE extensions for OSPF. > The software has been tested against CISCO. > If you decide to try it, please read the short manuel at: > http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt > The code is located at: > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz > If you have any questions, you are welcome to ask. > Any request for any help and support is welcome. > > Regards, > Vadim. > _______________________________________________ > Quagga-dev mailing list > Qua...@li... > http://lists.quagga.net/mailman/listinfo/quagga-dev |
|
From: Vadim S. <su...@ne...> - 2004-06-01 21:41:12
|
James, ----- Original Message ----- From: "James R. Leu" <jl...@mi...> To: "Vadim Suraev" <su...@ne...> Cc: <Qua...@li...>; <mpl...@li...> Sent: Tuesday, June 01, 2004 5:39 PM Subject: Re: [quagga-dev 1233] RSVP-TE, OSPF-TE free source code > I'd like to work with you to clean up the layout of the code, port > to quagga, and integrate with my MPLS infrastructure work. If you are > interested in such an effort, please respond to the list, otherwise I > will begin the effort myself. Thank you for your contribution. yes, I'm interested to do that with you. > > BTW I didn't see a license or copyright in any of the files. You will > probably want to do that. yes. > > (I've CC'd the mpls-linux mailing list) > > -- > James R. Leu > jl...@mi... > > On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote: > > Hi. > > I'd like to contribute to the Zebra users & developers' community several software > > modules that I've developed recently: > > RSVP-TE, TE application, TE extensions for OSPF. > > The software has been tested against CISCO. > > If you decide to try it, please read the short manuel at: > > http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt > > The code is located at: > > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz > > If you have any questions, you are welcome to ask. > > Any request for any help and support is welcome. > > > > Regards, > > Vadim. > > > _______________________________________________ > > Quagga-dev mailing list > > Qua...@li... > > http://lists.quagga.net/mailman/listinfo/quagga-dev > > |
|
From: Vadim S. <su...@ne...> - 2004-06-15 00:09:59
|
Hi. I've updated the code since the previous version has a problem with build. Now, it is fixed. The code location is the same: http://www.angelfire.com/theforce/suraev/zebra/index.html . Regards, Vadim. ----- Original Message ----- From: "James R. Leu" <jl...@mi...> To: "Vadim Suraev" <su...@ne...> Cc: <Qua...@li...>; <mpl...@li...> Sent: Tuesday, June 01, 2004 5:39 PM Subject: Re: [quagga-dev 1233] RSVP-TE, OSPF-TE free source code > I'd like to work with you to clean up the layout of the code, port > to quagga, and integrate with my MPLS infrastructure work. If you are > interested in such an effort, please respond to the list, otherwise I > will begin the effort myself. Thank you for your contribution. > > BTW I didn't see a license or copyright in any of the files. You will > probably want to do that. > > (I've CC'd the mpls-linux mailing list) > > -- > James R. Leu > jl...@mi... > > On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote: > > Hi. > > I'd like to contribute to the Zebra users & developers' community several software > > modules that I've developed recently: > > RSVP-TE, TE application, TE extensions for OSPF. > > The software has been tested against CISCO. > > If you decide to try it, please read the short manuel at: > > http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt > > The code is located at: > > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz > > If you have any questions, you are welcome to ask. > > Any request for any help and support is welcome. > > > > Regards, > > Vadim. > > > _______________________________________________ > > Quagga-dev mailing list > > Qua...@li... > > http://lists.quagga.net/mailman/listinfo/quagga-dev > > |
|
From: Muhammad R. S. <sa...@cc...> - 2004-06-03 11:30:20
|
hello, I am relatively new in this group, I want to add a packet identification = scheme in a MPLS router, and then based on the application layer, want = to set EXP bits value. Can anyone help me on this one, like is it = already implemented, if not, what files do I have to play with.=20 looking forward for your kind guidance. regards Muhammad R. Sami Research Assistant, Computer Engineering Department P.O.Box 354 King Fahd University of Petroleum & Minerals Dhahran 31261 Saudi Arabia. Tel: +96638601423 Cell: +96657982951 www.ccse.kfupm.edu.sa/sami ----- Original Message -----=20 From: James R. Leu=20 To: Vadim Suraev=20 Cc: Qua...@li... ; = mpl...@li...=20 Sent: Tuesday, June 01, 2004 5:39 PM Subject: [mpls-linux-general] Re: [quagga-dev 1233] RSVP-TE, OSPF-TE = free source code I'd like to work with you to clean up the layout of the code, port to quagga, and integrate with my MPLS infrastructure work. If you are interested in such an effort, please respond to the list, otherwise I will begin the effort myself. Thank you for your contribution. BTW I didn't see a license or copyright in any of the files. You will probably want to do that.=20 (I've CC'd the mpls-linux mailing list) --=20 James R. Leu jl...@mi... On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote: > Hi. > I'd like to contribute to the Zebra users & developers' community = several software=20 > modules that I've developed recently: > RSVP-TE, TE application, TE extensions for OSPF. > The software has been tested against CISCO. > If you decide to try it, please read the short manuel at: > http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt > The code is located at: > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz > If you have any questions, you are welcome to ask. > Any request for any help and support is welcome. >=20 > Regards, > Vadim. > _______________________________________________ > Quagga-dev mailing list > Qua...@li... > http://lists.quagga.net/mailman/listinfo/quagga-dev ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle = 10g.=20 Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3D3149&alloc_id=3D8166&op=3Dclick _______________________________________________ mpls-linux-general mailing list mpl...@li... https://lists.sourceforge.net/lists/listinfo/mpls-linux-general |
|
From: James R. L. <jl...@mi...> - 2004-06-03 13:59:46
|
On Thu, Jun 03, 2004 at 09:44:21AM +0300, Muhammad R. Sami wrote: > hello, > I am relatively new in this group, I want to add a packet identification scheme in a MPLS router, and then based on the application layer, want to set EXP bits value. Can anyone help me on this one, like is it already implemented, if not, what files do I have to play with. > looking forward for your kind guidance. > regards There already exists some mechanisms for EXP setting. Although there is probably area for improvment. I should not that I have not tested EXP setting for about a year and a significant amount of development has occureded since then, so you may run into some bugs, if so let me know and I'll try and produce fixes. A quick overview of what you will need to setup: -bind a IPv4 route to a LSP -use iptables to identify and mark packets -use the markings to set EXP values (or choose differnt LSPs) -use EXP value to determin queuing priority > Muhammad R. Sami > Research Assistant, > Computer Engineering Department > P.O.Box 354 > King Fahd University of Petroleum & Minerals > Dhahran 31261 > Saudi Arabia. > Tel: +96638601423 > Cell: +96657982951 > www.ccse.kfupm.edu.sa/sami > ----- Original Message ----- > From: James R. Leu > To: Vadim Suraev > Cc: Qua...@li... ; mpl...@li... > Sent: Tuesday, June 01, 2004 5:39 PM > Subject: [mpls-linux-general] Re: [quagga-dev 1233] RSVP-TE, OSPF-TE free source code > > > I'd like to work with you to clean up the layout of the code, port > to quagga, and integrate with my MPLS infrastructure work. If you are > interested in such an effort, please respond to the list, otherwise I > will begin the effort myself. Thank you for your contribution. > > BTW I didn't see a license or copyright in any of the files. You will > probably want to do that. > > (I've CC'd the mpls-linux mailing list) > > -- > James R. Leu > jl...@mi... > > On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote: > > Hi. > > I'd like to contribute to the Zebra users & developers' community several software > > modules that I've developed recently: > > RSVP-TE, TE application, TE extensions for OSPF. > > The software has been tested against CISCO. > > If you decide to try it, please read the short manuel at: > > http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt > > The code is located at: > > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz > > If you have any questions, you are welcome to ask. > > Any request for any help and support is welcome. > > > > Regards, > > Vadim. > > > _______________________________________________ > > Quagga-dev mailing list > > Qua...@li... > > http://lists.quagga.net/mailman/listinfo/quagga-dev > > > > > ------------------------------------------------------- > This SF.Net email is sponsored by: Oracle 10g > Get certified on the hottest thing ever to hit the market... Oracle 10g. > Take an Oracle 10g class now, and we'll give you the exam FREE. > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click > _______________________________________________ > mpls-linux-general mailing list > mpl...@li... > https://lists.sourceforge.net/lists/listinfo/mpls-linux-general -- James R. Leu jl...@mi... |
|
From: Muhammad R. S. <sa...@cc...> - 2004-06-09 07:37:16
|
In reference to my previous mail, basically I want the ingress router to = read specific information in the application layer header and then set = EXP value and forward the packet. It is basically an If-Else situation: If this (in application payloiad) -> then EXP value =3D x else EXP value =3D y Is this possible. If yes then please let me know how? Looking forward for your kind cooperation. regards ----- Original Message -----=20 From: James R. Leu=20 To: Muhammad R. Sami=20 Cc: mpl...@li...=20 Sent: Thursday, June 03, 2004 4:58 PM Subject: Re: [mpls-linux-general] packet identification On Thu, Jun 03, 2004 at 09:44:21AM +0300, Muhammad R. Sami wrote: > hello, > I am relatively new in this group, I want to add a packet = identification scheme in a MPLS router, and then based on the = application layer, want to set EXP bits value. Can anyone help me on = this one, like is it already implemented, if not, what files do I have = to play with.=20 > looking forward for your kind guidance. > regards There already exists some mechanisms for EXP setting. Although there = is probably area for improvment. I should not that I have not tested EXP setting for about a year and a significant amount of development has occureded since then, so you may run into some bugs, if so let me know = and I'll try and produce fixes. A quick overview of what you will need to setup: -bind a IPv4 route to a LSP -use iptables to identify and mark packets -use the markings to set EXP values (or choose differnt LSPs) -use EXP value to determin queuing priority > Muhammad R. Sami > Research Assistant, > Computer Engineering Department > P.O.Box 354 > King Fahd University of Petroleum & Minerals > Dhahran 31261 > Saudi Arabia. > Tel: +96638601423 > Cell: +96657982951 > www.ccse.kfupm.edu.sa/sami > ----- Original Message -----=20 > From: James R. Leu=20 > To: Vadim Suraev=20 > Cc: Qua...@li... ; = mpl...@li...=20 > Sent: Tuesday, June 01, 2004 5:39 PM > Subject: [mpls-linux-general] Re: [quagga-dev 1233] RSVP-TE, = OSPF-TE free source code >=20 >=20 > I'd like to work with you to clean up the layout of the code, port > to quagga, and integrate with my MPLS infrastructure work. If you = are > interested in such an effort, please respond to the list, = otherwise I > will begin the effort myself. Thank you for your contribution. >=20 > BTW I didn't see a license or copyright in any of the files. You = will > probably want to do that.=20 >=20 > (I've CC'd the mpls-linux mailing list) >=20 > --=20 > James R. Leu > jl...@mi... >=20 > On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote: > > Hi. > > I'd like to contribute to the Zebra users & developers' = community several software=20 > > modules that I've developed recently: > > RSVP-TE, TE application, TE extensions for OSPF. > > The software has been tested against CISCO. > > If you decide to try it, please read the short manuel at: > > = http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt > > The code is located at: > > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz > > If you have any questions, you are welcome to ask. > > Any request for any help and support is welcome. > >=20 > > Regards, > > Vadim. >=20 > > _______________________________________________ > > Quagga-dev mailing list > > Qua...@li... > > http://lists.quagga.net/mailman/listinfo/quagga-dev >=20 >=20 >=20 >=20 > ------------------------------------------------------- > This SF.Net email is sponsored by: Oracle 10g > Get certified on the hottest thing ever to hit the market... = Oracle 10g.=20 > Take an Oracle 10g class now, and we'll give you the exam FREE. > http://ads.osdn.com/?ad_id=3D3149&alloc_id=3D8166&op=3Dclick > _______________________________________________ > mpls-linux-general mailing list > mpl...@li... > https://lists.sourceforge.net/lists/listinfo/mpls-linux-general --=20 James R. Leu jl...@mi... |
Thanks for helping keep SourceForge clean.
X