Re: [mpls-linux-general] cannot configure nhlfe

[James R. L. <jl...@mi...>]

On Wed, Mar 16, 2005 at 03:13:29PM +1100, Dylan Syme wrote:
> Hi
>=20
> I have been trying to set up LSPs between two computers running=20
> mpls-enabled kernels (FC2).  I am able to compile the patched kernel sour=
ce=20
> code OK, boot into the new kernel and I run the following commands:
>=20
> # mpls nhlfe add key 0
> # mpls nhlfe change key 0x2 instructions push gen 32 nexthop eth0 ipv4=20
> 192.168.1.1

Please issue the following commands and send the output to the list:

    cat /sys/mpls/*
    # issue the command the fails
    dmesg | grep MPLS

I prefer is you use the 'script' command to capture the output as opposed
to cutting and pasting, but I'll take the output anyway you can get it.

> The second of these commands returns:
>=20
> RTNETLINK answers: Operation not permitted.
>=20
> The arguments in the command line are consistent with my network setup, a=
nd=20
> all the other basic instructions (eg. ip route add, mpls labelspace, mpls=
=20
> ilm add)  all work as expected.
>=20
> Can you help?
>=20
> cheers
>=20
> Dylan Syme
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> mpls-linux-general mailing list
> mpl...@li...
> https://lists.sourceforge.net/lists/listinfo/mpls-linux-general

--=20
James R. Leu
jl...@mi...