[mpls-linux-general] what's the next step to dig in LDP code

[<m9...@cn...>]

Hi James,

Last time you told me to do "Start ldpd, telnet localhost 2610, =
configure, turn on LDP globally, turn on LDP on an interface, use the =
'?' key to figure out what commands are availble".

I have tried it , and I got the result below, there seems only few =
comands available.  What should I do on next step??

uml-1(config-ldp)#
  disable           Disable
  end               End current mode and change to enable mode.
  exit              Exit current mode and down to previous mode
  help              Description of the interactive help system
  list              Print command list
  lsp-control-mode  control mode
  lsr-id            LDP Label Switch Router Identifier
  no                Negate a command or set its defaults
  quit              Exit current mode and down to previous mode
  show              Show running system information
  trace             LDP debugging
  write             Write running configuration to memory, network, or
                    terminal


Best Regards

Timothy
2005.02.19


>On Wed, Feb 16, 2005 at 12:28:13AM +0800, ?????x wrote:
> Hi James,
>=20
> I remember last time you gived me the answer about LDP question which =
was showed below
>=20
> "Have your tried to run it yet?  Try that and start working on the =
first segfault you hit ...."
>=20
> Now, I want to know how to try it, if Quagga+LDP is not ready for =
users, how do I try it? Could you give me a hint?

Start ldpd, telnet localhost 2610, configure,
turn on LDP globally, turn on LDP on an interface, use the '?' key to =
figure
out what commands are availble.

> Thanks
>=20
> Timothy
> 2005.02.15
>=20
> The original mail was showed below
>=20
> On Tue, Feb 15, 2005 at 11:33:30PM +0800, ?????x wrote:
> > Hi James,
> >=20
> > I am trying to run LDP now. But I don't know where to start? And how =
to try it. Could you give me some examples or some scenarios?
> >=20
> > Thanks
> >=20
> > Timothy
> > 2005.02.15
> >=20
> > Check out the "Access to my development repository" on
> >  http://mpls-linux.sf.net/
> > =20
> >  On Wed, Feb 02, 2005 at 05:53:00PM +0800, ?????x wrote:
> >  > Hi James,
> >  >=20
> >  > According to your answer, could you explain more about "there are =
more significant bugs
> > to fix" that you mention before, I don"t understand clearly, could =
you give me some examples
> > or some hints.
> > =20
> >  Have your tried to run it yet?  Try that and start working on the
> >  first segfault you hit ....
> > =20
> >  > If I want to work on the code, where to grab the latest from your =
development tree (I am
> > not sure what you mean)?
> >  >=20
> >  > Thanks very much.
> >  >=20
> >  > Best Regards.
> >  >=20
> >  > Timothy
> >  > 2005.02.02
> >  >=20
> >  > > Why do you not listen to what I"ve said before? There are more =
significant
> >  > >bugs to fix then to try and port all of the "extra" commands to =
the new
> >  > >porting layer.  If you are determined to work on the code grab =
the latest
> >  > >from my development tree and get the basic commands working.
> >  >=20
> >  > >On Tue, Feb 01, 2005 at 05:19:01PM +0800, ?????x wrote:
> >  > > Hi James,
> >  > >=20
> >  > > When I canceled "#if 0" of some parts of "ldp_vtysh.c", for =
example:=20
> >  > >=20
> >  > > DEFUN(ldp_if_remote_tcp_port,
> >  > >       ldp_if_remote_tcp_port_cmd,
> >  > >       "remote-tcp-port <1-65535>",
> >  > >       "MPLS interface configuration\n"
> >  > >       "remote LDP port\n"
> >  > >       "port number\n")
> >  > > {
> >  > >   struct interface *ifp =3D vty->index;
> >  > >   struct ldp_interface *li =3D (struct =
ldp_interface*)ifp->info;
> >  > >   struct ldp *ldp =3D li->ldp;
> >  > >=20
> >  > >   li->entity.remote_tcp_port =3D atoi(argv[0]);
> >  > >   if (!ldp) {
> >  > >     li->create_on_hold =3D MPLS_BOOL_TRUE;
> >  > >     return CMD_SUCCESS;
> >  > >   }
> >  > >=20
> >  > >   ldp_cfg_entity_set(ldp->h, &li->entity, =
LDP_ENTITY_CFG_REMOTE_TCP);
> >  > >   return CMD_SUCCESS;
> >  > > }
> >  > >=20
> >  > > When I  compile it, there was an error:
> >  > > ldp_vty.c:1555: error: structure has no member named `ldp"
> >  > >=20
> >  > > Then I went to check "ldp_interface.h", I found that there =
actually has no this member
> > in "struct ldp_interface".
> >  > >=20
> >  > > Thanks.
> >  > >=20
> >  > > Timothy
> >  > > 2005.02.01
> >  > --=20
> >  > James R. Leu
> >  > jleu@mi...
> > =20
> >  --=20
> >  James R. Leu
> >  jleu@mi...
> > =20
>=20
> --=20
> James R. Leu
> jl...@mi...

--=20
James R. Leu
jl...@mi...