[mpls-linux-general] Correction of network configurtation
Status: Beta
Brought to you by:
jleu
|
From: murat <te...@ya...> - 2005-01-17 17:48:58
|
Sorry for sending this a second time. Network configuration was not visible as I expected.
And I discovered a mistake at [R4]:
Old: [R4] eth0:10.0.2.6/30
New: [R4] eth0:10.0.4.6/30
Hi James and all.
(First of all: thank you for your great work.)
The problem that I face with MPLS is: The documentation is to old. When I try to follow the instuctions or type the commands in the documentation - I get lot of errors.
For setting up my system I used the RMP packages from
sf-net:
iproute-2.4.7-14mpls_1_938.i386.rpm
iptables-1.2.9-2.3.1mpls_1_938.i386.rpm
kernel-2.6.8-1.521mpls_1_938a.i686.rpm
mplsadm2-1.938-1.i386.rpm
[root@Rio root]# uname -a
Linux Rio 2.6.8-1.521mpls_1_938a #1 Sun Oct 3 21:20:28
CDT 2004 i686 athlon i386 GNU/Linux
[root@Rio root]# more /etc/fedora-release
Fedora Core release 2 (Tettnang)
[root@Rio root]# rpm -qa | grep tcpdump
tcpdump-3.8.2-3
I'm very very short of time for finishing my thesis.
Network configuration:
Sending (ping 10.0.3.50) downwards, getting (ping reply) upwards.
[R1] eth0:10.0.1.50/24
| IP packet /\ IP packet
\/ (ping 10.0.3.50) | (ping reply)
[R2] eth0:10.0.1.1/24
eth1:10.0.2.1/30
| MPLS /\ MPLS
\/ |
[R3] eth0:10.0.2.2/30
eth1:10.0.4.5/30
| MPLS /\ MPLS
\/ |
[R4] eth0:10.0.4.6/30
eth1:10.0.8.9/30
| MPLS /\ MPLS
\/ |
[R5] eth0:10.0.8.10/30
eth1:10.0.3.1/24
| IP packet /\ IP packet
\/ (ping 10.0.3.50) | (ping reply)
[R6] eth0:10.0.3.50/24
Can you help me realizing this network. It is possible to make "forwarding" or "multiple pushes" at [R2], [R3], [R4] and [R5]. The documentation I have seems to be to old even I couldn't find any newer one (MPLS for Linux Developer's Guide, James Leu, Ramon Casellas, 2003 - and - mpls-linux-1.938.tar.bz2 /utils/README).
Thanks in advance for any help.
---------------------------------
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses. |