[mpls-linux-general] ospf

[Yablai A. B. <yab...@ei...>]

Hello every body,

I had install ldp-portable, deploy ospfbut  ospf not distribute route  
to kernel, i need help for appropriate configuration for  ospf. May be  
i have done bad configuration. This is my ospf configuration.

|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| 
|||||||||||||||||||||||||||

  Current configuration:
!
hostname root
password root
enable password root
!
!
!
interface lo
!
interface sit0
!
interface eth0
  mpls-te link metric 0
  mpls-te link max-bw 1.25e+06
  mpls-te link max-rsv-bw 1.25e+06
  mpls-te link unrsv-bw 0 1.25e+06
  mpls-te link unrsv-bw 1 1.25e+06
  mpls-te link unrsv-bw 2 1.25e+06
  mpls-te link unrsv-bw 3 1.25e+06
  mpls-te link unrsv-bw 4 1.25e+06
  mpls-te link unrsv-bw 5 1.25e+06
  mpls-te link unrsv-bw 6 1.25e+06
  mpls-te link unrsv-bw 7 1.25e+06
  mpls-te link rsc-clsclr 0x0
!
interface eth1
  mpls-te link metric 0
  mpls-te link max-bw 1.25e+06
  mpls-te link max-rsv-bw 1.25e+06
  mpls-te link unrsv-bw 0 1.25e+06
  mpls-te link unrsv-bw 1 1.25e+06
  mpls-te link unrsv-bw 2 1.25e+06
  mpls-te link unrsv-bw 3 1.25e+06
  mpls-te link unrsv-bw 4 1.25e+06
  mpls-te link unrsv-bw 5 1.25e+06
  mpls-te link unrsv-bw 6 1.25e+06
  mpls-te link unrsv-bw 7 1.25e+06
  mpls-te link rsc-clsclr 0x0
!
router ospf
  ospf router-id 192.168.3.1
  network 192.168.3.0/24 area 10
  network 192.168.4.0/24 area 10
   mpls-te
   mpls-te router-address 192.168.4.2
!
line vty
!
end
root#
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| 
|||||||||||||||||||||||||||

regards
Bougouyou