[mpls-linux-general] Packet Identification

[Muhammad R. S. <sa...@cc...>]

You outlined the following steps, require assistance for the following.

 

A quick overview of what you will need to setup:

-bind a IPv4 route to a LSP-----DONE

-use iptables to identify and mark packets----DONE

-use the markings to set EXP values (or choose differnt LSPs)----DONE

-use EXP value to determin queuing priority--------How to do this part? How
can I assign priority on the basis of EXP bits value?

 

 

Muhammad R. Sami 
Research Assistant, 
Computer Engineering Department 
P.O.Box 354 
King Fahd University of Petroleum & Minerals 
Dhahran 31261 
Saudi Arabia. 
Tel: +96638601423 
Cell: +96657982951 
www.ccse.kfupm.edu.sa/sami