[mpls-linux-general] Binding a MOI to a tunnel in kernel 2.6

[<Jon...@cs...>]

Dear all,

Just upgraded one of my linux mpls boxes to Fedora Core 2 and linux mpls
1.992. Sorry if this question has been asked before... But how can I
bind a MOI to a tunnel??

Basically, I tried to use "echo 0xkey >
/sys/mpls/mpls_tunnel/mtp-tunnel_name/moi. But nothing seems being set
if I look at /proc/net/mpls.

Did I do anything stupid or am I just looking at the wrong place?? This
is the log of events...

[root@saturn]# mplsadm2 -AO 0 -o push:gen:2000:set:eth1:ipv4:10.70.10.1
MPLSADM mplsadm.c:692:main: Out segment input: 0
MPLSADM mplsadm.c:688:main: Out instr input:
push:gen:2000:set:eth1:ipv4:10.70.10.1
Key: 0x00000003
Out Segment add: Success
MPLSADM mplsadm.c:292:fill_instructions: Instruction: push
MPLSADM mplsadm.c:229:fill_label: Label type: gen
MPLSADM mplsadm.c:292:fill_instructions: Instruction: set
MPLSADM mplsadm.c:181:parse_nh_info: eth1
MPLSADM mplsadm.c:182:parse_nh_info: 10.70.10.1
MPLSADM mplsadm.c:204:parse_nh_info: Nexthop protocol: ipv4
MPLSADM mplsadm.c:596:fill_instructions: Length: 2
Out Instr: Success

[root@saturn]# mplsadm2 -AT tunnel1
MPLSADM mplsadm.c:696:main: Tunnel input: tunnel1

[root@saturn]# ifconfig tunnel1 10.70.10.2 netmask 255.255.255.255

[root@saturn]# mplsadm2 -BO 0x00000003 -T tunnel1
MPLSADM mplsadm.c:692:main: Out segment input: 0x00000003
MPLSADM mplsadm.c:696:main: Tunnel input: tunnel1
Using mplsadm2 to bind/unbind MOIs to tunnels is deprecated in 2.6=20
Use:=20
echo "<key>|0" > /sys/mpls/mpls_tunnel/mtp-tunnel1/moi
 to bind / unbind a MOI to a tunnel
Bind/Unbind MOI: Invalid argument

[root@saturn]# echo "0x3" > /sys/mpls/mpls_tunnel/mtp-tunnel1/moi
=20
[root@saturn]# cat  /sys/mpls/mpls_tunnel/mtp-tunnel1/moi=20
moi: 0

[root@saturn]# cat /proc/net/mpls/tunnels=20
tunnel1 0x00000000

Any comments/suggestions are much appreciated...

Cheers,
Jonathan