[mpls-linux-general] still having problems with iptable commands

[Itrat R. Q. <iq...@cc...>]

OK, I tried the command

./iptables <other args> -j spec_nh --spec_nh 0x4788:0x2

but it didn=92t work.

My configuration is something like this

PC            INGRESS        LSR        EGRESS       PC

172.16.70.91  .90  .1      .10 .11     .12  .13      172.16.134.36
|--------------|    |--------|  |--------|   |--------|=20
eth0          eth2 eth0    eth0 eth1  eth0 eth1      eth0

I am using the following iptable commands at the INGRESS

./iptables =96F
./iptables =96P INPUT DROP
./iptables =96P FORWARD DROP
./iptables =96A INPUT =96i lo =96d 127.0.0.1 =96j ACCEPT                 =
       =20
./iptables =96A INPUT =96i eth2 =96d 172.16.134.36 =96j ACCEPT=20
./iptables =96A FORWARD =96i eth2 =96d 172.16.134.36 =96j ACCEPT
./iptables =96A OUTPUT =96o eth0 =96d 172.16.134.36 =96j spec_nh  --spec_=
nh 0x8847:0x2=20

Kindly tell me if there is something wrong with these rules or their orde=
r, if=20
not then kindly mention the specific printk commands to add in the target=
()=20
function of the ipt_spec_nh.c file.

Thanks in advance once again.