[mpls-linux-general] about mpls

[<che...@ho...>]

I have patched mpls-linux-1.172.tar to linux and 
compiled.Then I patch ldp-portable-0.310 to zebra-0.94.
First I input ‘zebra d’ in order to startup zebra.Second I 
input ‘mplsd’ in order to startup mpls.
Then the screen will print the following information:


MPLS: MPLSD (0.94) starts
MPLS: interface add lo index 1 flags 73 metric 1 mtu 
16436
MPLS: address add 127.0.0.1 to interface lo
MPLS: address add 0.0.0.0 to interface lo 
MPLS: interface add eth0 index 2 flags 4163 metric 1 
mtu 1500
MPLS: address add 202.112.146.244 to interface eth0
MPLS: address add 254.128.0.0 to interface eth0
MPLS: interface add eth1 index 3 flags 4099 metric 1 
mtu 1500
MPLS: address add 192.168.100.67 to interface eth1
MPLS: address add 254.128.0.0 to interface eth1
MPLS: interface add sit0 index 4 flags 128 metric 1 mtu 
1480
MPLS: router-id change 0.0.0.0
MPLS: route add 192.168.100.0/24
MPLS: ifindex 3
MPLS: route add 202.112.146.0/24
MPLS: ifindex 2


I have config 202.112.146.244 to interface eth0 and 
192.168.100.67 to interface eth1.
Why dose ‘the mplsd’ add two address on one interface?
Why dose router-id changed to 0.0.0.0? 
Please help me!Thank you very much!

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn