AW: [mpls-linux-general] Problems Patching zebra with LDP

[Josef P. <jo...@pe...>]

hmm thx Bruno,=20
but I'll  try to install Zebra + LDP with the kernel 2.6 next week with =
the
kernelheaders of 2.6 ,=20
because I've only managed to compile a 2.6 kernel with mpls support.=20
I got compilation Errors with 2.4 kernel and that's why it is no =
alternative
for me...

I'll keep you informed about my results with 2.6.

josef

-----Urspr=FCngliche Nachricht-----
Von: Bruno Jorge Marcelino [mailto:bj...@me...]=20
Gesendet: Samstag, 27. M=E4rz 2004 15:52
An: Josef Perlinger
Cc: mpl...@li...
Betreff: Re: [mpls-linux-general] Problems Patching zebra with LDP


I had the same problem as you!

I think the error RTA_LSP undeclared happens because you are using =
kernel
2.6 (maybe that value has differente name in mpls patch for 2.6)...

When I tried to implement ZEBRA+LDP in 2.6 kernel, I also couldn't =
compile.
But when I implemented it with kernel 2.4, it complied fine and it =
worked
OK!

Bruno

On Sat, 27 Mar 2004, Josef Perlinger wrote:

> Hi to all,
>
> I'm sorry I'm flooding the mailing list a little bit, but i really=20
> come not into the next step the zebra implementation of LDP:
>
> I want to use ZEBRA with the LDP Implemenatiotion of MPLS Linux
>
> I get also some "Hunks Failed" when I patch the zebra-0.94 files with=20
> the ldp_zebra_diff
>
> when I configure and make them I get the following errors:
>
> source=3D'rt_netlink.c' object=3D'rt_netlink.o' libtool=3Dno \=20
> depfile=3D'.deps/rt_netlink.Po' tmpdepfile=3D'.deps/rt_netlink.TPo' \
> depmode=3Dgcc3 /bin/sh ../depcomp \
> gcc -DHAVE_CONFIG_H -DSYSCONFDIR=3D\"/usr/local/etc/\" =
-DMULTIPATH_NUM=3D1 -I.
> -I. -I.. -I.. -I.. -I../lib    -g -O2 -Wall -c `test -f 'rt_netlink.c' =
||
> echo './'`rt_netlink.c
> rt_netlink.c: In function `netlink_route_change':
> rt_netlink.c:678: error: `RTA_LSP' undeclared (first use in this=20
> function)
> rt_netlink.c:678: error: (Each undeclared identifier is reported only=20
> once
> rt_netlink.c:678: error: for each function it appears in.)
> rt_netlink.c: In function `netlink_route_multipath':
> rt_netlink.c:1227: error: `RTA_LSP' undeclared (first use in this=20
> function)
> rt_netlink.c:1318: error: structure has no member named `rtnh_lsp'
> rt_netlink.c:1348: error: structure has no member named `rtnh_lsp'
> make[2]: *** [rt_netlink.o] Error 1
> make[2]: Leaving directory `/root/zebra-0.94/zebra'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/root/zebra-0.94'
> make: *** [all] Error 2
> uml:~/zebra-0.94#
>
>
> When I compile the zebra without mpls patching it the make works.
>
> Do you know what I'm doing wrong? or should i wait for the next=20
> release of the ldp-implementation? When will it be released?
>
> I use Debian: sid, uml kernel: 2.6.4
>
>
> regards josef
>
> Josef Perlinger
>
> Student FH-Sbg/TKS 2000
> Tel.: +43 664 4024906
> ICQ: 166227595
> Email: jo...@pe...
>
>
>
> attached my Patching output:
>
> uml:~/zebra-0.94_mpls# patch -p1 < ../ldp-portable/zebra-ldp.diff=20
> patching file bgpd/bgpd.c Hunk #2 FAILED at 181.
> Hunk #3 succeeded at 1758 (offset 60 lines).
> 1 out of 3 hunks FAILED -- saving rejects to file bgpd/bgpd.c.rej=20
> patching file bgpd/bgpd.h patching file bgpd/bgp_vty.c Hunk #1=20
> succeeded at 40 (offset 1 line).
> Hunk #2 succeeded at 401 (offset 1 line).
> Hunk #3 succeeded at 429 (offset 1 line).
> patching file bgpd/bgp_zebra.c
> patching file config.h.in
> patching file configure.ac
> Hunk #2 succeeded at 538 (offset 2 lines).
> Hunk #3 succeeded at 566 (offset 2 lines).
> Hunk #4 succeeded at 788 (offset 2 lines).
> Hunk #5 succeeded at 810 (offset 2 lines).
> patching file lib/command.c
> Hunk #1 succeeded at 2153 (offset 73 lines).
> Hunk #2 succeeded at 2217 (offset 73 lines).
> patching file lib/command.h
> patching file lib/if.c
> patching file lib/if.h
> patching file lib/linklist.h
> patching file lib/log.c
> patching file lib/log.h
> patching file lib/memory.c
> patching file lib/memory.h
> patching file lib/table.c
> patching file lib/table.h
> patching file lib/thread.c
> patching file lib/vty.c
> Hunk #1 succeeded at 648 (offset 24 lines).
> Hunk #2 succeeded at 1058 (offset 24 lines).
> patching file lib/zclient.c
> patching file lib/zclient.h
> patching file lib/zebra.h
> patching file Makefile.am
> patching file mplsd/create-links
> patching file mplsd/delete-links
> patching file mplsd/impl_fib.c
> patching file mplsd/impl_fib.h
> patching file mplsd/impl_ifmgr.c
> patching file mplsd/impl_ifmgr.h
> patching file mplsd/impl_lock.c
> patching file mplsd/impl_mm.c
> patching file mplsd/impl_mpls.c
> patching file mplsd/impl_mpls.h
> patching file mplsd/impl_policy.c
> patching file mplsd/impl_socket.c
> patching file mplsd/impl_timer.c
> patching file mplsd/impl_tree.c
> patching file mplsd/l2cc_interface.c
> patching file mplsd/l2cc_interface.h
> patching file mplsd/ldp.c
> patching file mplsd/ldp.h
> patching file mplsd/ldp_interface.c
> patching file mplsd/ldp_interface.h
> patching file mplsd/ldp_remote_peer.c
> patching file mplsd/ldp_remote_peer.h
> patching file mplsd/ldp_vty.c
> patching file mplsd/ldp_vty.h
> patching file mplsd/Makefile.am
> patching file mplsd/mpls.c
> patching file mplsd/mplsd.conf.sample
> patching file mplsd/mpls.h
> patching file mplsd/mpls_handle_type.h patching file=20
> mplsd/mpls_interface.c patching file mplsd/mpls_interface.h patching=20
> file mplsd/mpls_main.c patching file mplsd/mpls_trace.h patching file=20
> mplsd/mpls_vty.c patching file mplsd/mpls_vty.h patching file=20
> mplsd/mpls_zebra.c patching file mplsd/mpls_zebra.h patching file=20
> mplsd/rsvpte.c patching file mplsd/rsvpte.h patching file=20
> mplsd/rsvpte_interface.c patching file mplsd/rsvpte_interface.h=20
> patching file mplsd/rsvpte_vty.c patching file mplsd/rsvpte_vty.h=20
> patching file mplsd/static.c patching file mplsd/static.h patching=20
> file mplsd/static_tunnel.c patching file mplsd/static_tunnel.h=20
> patching file mplsd/static_vty.c patching file mplsd/static_vty.h=20
> patching file ospfd/ospfd.c Hunk #1 succeeded at 60 with fuzz 1=20
> (offset 4 lines).
> Hunk #2 succeeded at 68 (offset 4 lines).
> Hunk #3 FAILED at 84.
> 1 out of 3 hunks FAILED -- saving rejects to file ospfd/ospfd.c.rej=20
> patching file ospfd/ospf_lsdb.c Hunk #1 FAILED at 284.
> Hunk #2 FAILED at 293.
> 2 out of 2 hunks FAILED -- saving rejects to file=20
> ospfd/ospf_lsdb.c.rej patching file ospfd/ospf_lsdb.h Hunk #1 FAILED=20
> at 79.
> 1 out of 1 hunk FAILED -- saving rejects to file ospfd/ospf_lsdb.h.rej =

> patching file ospfd/ospf_vty.c Hunk #1 FAILED at 3046.
> Hunk #2 succeeded at 3080 (offset 21 lines).
> Hunk #3 succeeded at 3586 with fuzz 2 (offset -7 lines).
> Hunk #4 FAILED at 3614.
> Hunk #5 FAILED at 3642.
> 3 out of 5 hunks FAILED -- saving rejects to file ospfd/ospf_vty.c.rej =

> patching file ospfd/ospf_zebra.c Hunk #2 succeeded at 167 (offset 3=20
> lines).
> Hunk #3 succeeded at 1153 (offset -17 lines).
> patching file zebra/main.c
> patching file zebra/Makefile.am
> patching file zebra/redistribute.c
> patching file zebra/rib.h
> patching file zebra/router-id.c
> patching file zebra/router-id.h
> patching file zebra/rt_netlink.c
> Hunk #1 succeeded at 613 (offset 7 lines).
> Hunk #2 succeeded at 670 (offset 7 lines).
> Hunk #3 succeeded at 1222 (offset 9 lines).
> Hunk #4 succeeded at 1246 (offset 9 lines).
> Hunk #5 succeeded at 1313 (offset 9 lines).
> Hunk #6 succeeded at 1342 (offset 9 lines).
> patching file zebra/zebra_rib.c
> patching file zebra/zebra_vty.c
> patching file zebra/zserv.c
> patching file zebra/zserv.h
> uml:~/zebra-0.94_mpls#
>
>
> Josef Perlinger
> Student FH-Sbg/TKS 2000
> Tel.: +43 664 4024906
> ICQ: 166227595
> Email: jo...@pe...
>
>
>