Re: [mpls-linux-general] (no subject)

[James R. L. <jl...@mi...>]

Did you turn on ospf?  Is OSPF propogating reachbility info about the
router-id?


On Mon, May 12, 2003 at 09:57:12AM +0800, bi...@so... wrote:
> =A3=CEow I am running zebra and mplsd on two virtual machines,the virtu=
al machines software is vmware workstation 4.004. The IP address is 172.2=
6.12.148 and 172.26.12.151.
> I use Linux-2.4.18-14=A1=A2mpls-linux-1.172=A1=A2zebra-0.93a=A1=A2ldp-p=
ortable-0.305=A1=A3
> And the enviroment is:
> Zebra -P 1000 -d
> Bgpd -P 1001 -d
> Mplsd -P 1002
>=20
> First problem:
> When do as follows:
> Telnet 172.26.12.148 1002
>=20
> The output is as follows:
> Hello, this is zebra (version 0.93a).
> Copyright 1996-2002 Kunihiro Ishiguro.
>=20
> User Access Verification
>=20
> Password:
> Ldp1>
> Ldp1> show ldp
> LSR-ID: ac1a0c97 Admin State: ENABLED
> Transport Address: 00000000
> Control Mode: ORDERED   Repair Mode: GLOBAL
> Propogate Release: TRUE Label Merge: TRUE
> Retention Mode: LIBERAL Loop Detection Mode: NONE
> TTL-less-domain: FALSE
> Local TCP Port: 646     Local UDP Port: 646
> Keep-alive Time: 45     Keep-alive Interval: 15
> Hello Time: 15  Hello Interval: 5
>=20
> Ldp1> show ldp neighbor
> Peer LDP Ident: 172.26.12.148:0; Local LDP Ident: 172.26.12.151:0
>         TCP connection: n/a
>         State: OPERATIONAL; Msgs sent/recv: 1370/1369; UNSOLICITED
>         Up time: n/a
>         LDP discovery sources:
>           eth0
>         Addresses bound to peer:
>           172.26.12.148
>=20
> Ldp1> show mpls forward
> Insegments:
>   Lbl Spc  Label Owner
>     0      10001 LDP
> Total 1
>=20
> Outsegments:
>=20
> Total 0
>=20
> Cross Connects:
>=20
> Total 0
>=20
> Ldp1>
> Ldp1> show ldp database
>   172.26.0.0/16  local binding:   label: gen 10001
>   172.26.0.0/16  remote binding:  no outlabel lsr: 172.26.12.148:0
>=20
> why no outsegments?
>=20
> Second problem :
> This problem is about mplsadm when I want to manually set up labels.
> #mplsadm -L eth0:0
> Label Space:Invalid argument
> #mplsadm -A -O 0
> Key:0x00000000
> Out Segment add:Invalid argument
> And there=A1=AFs no file named mpls_out in the directory /proc/net
> It seemed that I cannot use mplsadm.what=A1=AFs the problem?
> Can you give me some suggestions?
>       =20
>                                =20
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara
> The only event dedicated to issues related to Linux enterprise solution=
s
> www.enterpriselinuxforum.com
>=20
> _______________________________________________
> mpls-linux-general mailing list
> mpl...@li...
> https://lists.sourceforge.net/lists/listinfo/mpls-linux-general

--=20
James R. Leu