[mpls-linux-general] help for setting up lsp

[wang <te...@ey...>]

mpls-linux-generalhi,all
  my network is as following :

10.0.0.10 (eth0)	10.0.1.20 (eth1)
 A---------------------B---------------------C
 	10.0.0.20 (eth0)	10.0.1.30 (eth1)

  And I want to setup lsp between A and C, so I configure the hosts like this:

 On A:
 =====
 mplsadm2 -vAO 0 -o push:gen:16:set:eth0:ipv4:10.0.1.20 # returns <key1>
 ip2 route add 10.0.1.30/32 via 10.0.0.20 lsp <key1>
 mplsadm2 -vAI gen:20:0
 mplsadm2 -vL eth0:0
 
 On B:
 =====
 # for LSP from A to C
# mplsadm2 -vAI gen:16:0
 mplsadm2 -vAO 0 -o push:gen:16:set:eth1:ipv4:10.0.1.30 # returns <key2>
 mplsadm2 -vI gen:16:0 -o <key2> -B
 mplsadm2 -vL eth1:0
 
 # for LSP from C to A
# mplsadm2 -vAI gen:20:0
 mplsadm2 -vAO 0 -o push:gen:20:set:eth0:ipv4:10.0.0.10 # returns <key3>
 mplsadm2 -vI gen:20:0 -o <key3> -B
 mplsadm2 -vL eth0:0
 
 On C:
 =====
 mplsadm2 -vAI gen:16:0
 mplsadm2 -vAO 0 -o push:gen:20:set:eth1:ipv4:10.0.0.20 # returns <key4>
 ip2 route add 10.0.0.10/32 via 10.0.1.20 lsp <key4>
 mplsadm2 -vL eth1:0


Is it right?