Re: [mpls-linux-general] HELP ME PLEASE!!!

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

(I asked you to continue to CC the mpls-linux mailing list.  Please
respect my wishes.)

On Mon, Mar 24, 2003 at 05:31:34PM +0100, e7...@ti... wrote:
> Follwowing yor instructions i've done the foolowing:
> [root@localhost root]# cd /usr/src/mpls-linux-1.1/utils/
> [root@localhost utils]# make clean
> Makefile:6: *** missing separator.  Stop.
> [root@localhost utils]# make
> What's happened?

It didn't work.

> Makefile that is in  /usr/src/mpls-linux-1.1/utils/ is this:
> [root@localhost utils]# cat Makefile
> CC=gcc
> CFLAGS = -O2 -Wall
> 
> 
> all: mplsadm
>      strip mplsadm
> 
> 
> mplsadm: netlink.o mplsadm.o
>       gcc -O2 -static -o $@ $^
> 
> clean:
>         rm -rf *.o mplsadm
> What i've to do?

Do you know how to do any sort of debugging?  Do you know how a
Makefile works?  If not, why are you even trying to understand MPLS,
go back to school and learn about UNIX first.

> >-- Messaggio Originale --
> >From: "James R. Leu" <jl...@mi...>
> >To: e7...@ti...
> >Cc: mpl...@li...
> >Subject: Re: [mpls-linux-general] HELP ME PLEASE!!!
> >Reply-To: jl...@mi...
> >Date: Mon, 24 Mar 2003 12:12:40 -0600
> >
> >
> >(CC'ed to the list, please continue to CC the list)
> >
> >'mplsadm2 -d' toggles kernel debugging.  When kernel debugging is turned
> >on every mplsadm2 command will result in new info showing up at the end
> of
> >the
> >'dmesg' output.
> >
> >On Mon, Mar 24, 2003 at 04:45:05PM +0100, e7...@ti... wrote:
> >> I'm using mpls-linux-1.172
> >> I don't know where i can find mplsadm2
> >
> >cd mpls-linux/utils/
> >make clean
> >make
> >
> >> I've tryed to make what i've written many times, the first time it gaves
> >> me result after every instruction i gave but now i doesn't happen. Why?
> >> Where i can see debug info?
> >> Which are they in the result of dmesg that i've done and written under?
> >> 
> >> >-- Messaggio Originale --
> >> >Date: Mon, 24 Mar 2003 11:25:46 -0600
> >> >From: "James R. Leu" <jl...@mi...>
> >> >To: e7...@ti...
> >> >Subject: Re: [mpls-linux-general] HELP ME PLEASE!!!
> >> >Reply-To: jl...@mi...
> >> >
> >> >
> >> >On Mon, Mar 24, 2003 at 04:27:40PM +0100, e7...@ti... wrote:
> >> >> I'0m using mplsadm
> >> >
> >> >Where did you get mplsadm?  If you are using the most recent mpls-linux
> >> >it creates mplsdadm2, and you will see output after each and every
> >> >'mplsadm2' command.
> >> >
> >> >> I've done 
> >> >> [root@localhost utils]# mplsadm -A -O 0
> >> >> [root@localhost utils]# mplsadm -O 0x2
> >> >> [root@localhost utils]# mplsadm -O 0x2 -o push:gen:16:eth0:ipv4:10.0.3.17
> >> >> [root@localhost utils]# mplsadm -A -I gen:17:0
> >> >> [root@localhost utils]# mplsadm -L eth0:0
> >> >> After i've done 
> >> >> [root@localhost utils]# dmesg
> >> >> Linux version 2.4.20 (ro...@lo...) (gcc version 2.96
> >20000731
> >> >> (Red Hat Linux 7.1 2.96-98)) #12 SMP ven feb 21 08:45:47 CET
> >> >>  2003
> >> >> BIOS-provided physical RAM map:
> >> >>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> >> >>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> >> >>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> >> >>  BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
> >> >>  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> >> >> 256MB LOWMEM available.
> >> >> On node 0 totalpages: 65536
> >> >> zone(0): 4096 pages.
> >> >> zone(1): 61440 pages.
> >> >> zone(2): 0 pages.
> >> >> Kernel command line: auto BOOT_IMAGE=linux_prova ro root=306 BOOT_FILE=/boot/bzImage
> >> >> Local APIC disabled by BIOS -- reenabling.
> >> >> Found and enabled local APIC!
> >> >> Initializing CPU#0
> >> >> Detected 349.183 MHz processor.
> >> >> Console: colour VGA+ 80x25
> >> >> Calibrating delay loop... 696.32 BogoMIPS
> >> >> Memory: 255900k/262144k available (1821k kernel code, 5856k reserved,
> >> 647k
> >> >> data, 120k init, 0k highmem)
> >> >> Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
> >> >> Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
> >> >> Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
> >> >> Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
> >> >> Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
> >> >> CPU: L1 I cache: 16K, L1 D cache: 16K
> >> >> CPU: L2 cache: 512K
> >> >> Intel machine check architecture supported.
> >> >> Intel machine check reporting enabled on CPU#0.
> >> >> CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
> >> >> CPU:             Common caps: 0183fbff 00000000 00000000 00000000
> >> >> Enabling fast FPU save and restore... done.
> >> >> Checking 'hlt' instruction... OK.
> >> >> POSIX conformance testing by UNIFIX
> >> >> CPU: L1 I cache: 16K, L1 D cache: 16K
> >> >> CPU: L2 cache: 512K
> >> >> Intel machine check reporting enabled on CPU#0.
> >> >> CPU:     After generic, caps: 0183fbff 00000000 00000000 00000000
> >> >> CPU:             Common caps: 0183fbff 00000000 00000000 00000000
> >> >> CPU0: Intel Pentium II (Deschutes) stepping 01
> >> >> per-CPU timeslice cutoff: 1459.33 usecs.
> >> >> SMP motherboard not detected.
> >> >> enabled ExtINT on CPU#0
> >> >> ESR value before enabling vector: 00000000
> >> >> ESR value after enabling vector: 00000000
> >> >> Using local APIC timer interrupts.
> >> >> calibrating APIC timer ...
> >> >> ..... CPU clock speed is 349.1902 MHz.
> >> >> ..... host bus clock speed is 99.7683 MHz.
> >> >> cpu: 0, clocks: 997683, slice: 498841
> >> >> CPU0<T0:997680,T1:498832,D:7,S:498841,C:997683>
> >> >> Waiting on wait_init_idle (map = 0x0)
> >> >> All processors have done init_idle
> >> >> PCI: PCI BIOS revision 2.10 entry at 0xed728, last bus=1
> >> >> PCI: Using configuration type 1
> >> >> PCI: Probing PCI hardware
> >> >> PCI: Using IRQ router PIIX [8086/7110] at 00:14.0
> >> >> Limiting direct PCI/PCI transfers.
> >> >> isapnp: Scanning for PnP cards...
> >> >> isapnp: Card 'ESS ES1869 Plug and Play AudioDrive'
> >> >> isapnp: 1 Plug & Play card detected total
> >> >> Linux NET4.0 for Linux 2.4
> >> >> Based upon Swansea University Computer Society NET3.039
> >> >> Initializing RT netlink socket
> >> >> Starting kswapd
> >> >> Journalled Block Device driver loaded
> >> >> Installing knfsd (copyright (C) 1996 ok...@mo...).
> >> >> parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
> >> >> parport0: irq 7 detected
> >> >> pty: 256 Unix98 ptys configured
> >> >> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI
> >> >> ISAPNP enabled
> >> >> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> >> >> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> >> >> ttyS02 at 0x03e8 (irq = 4) is a 16450
> >> >> ttyS03 at 0x02e8 (irq = 3) is a 16450
> >> >> lp0: using parport0 (polling).
> >> >> lp0: console ready
> >> >> Uniform Multi-Platform E-IDE driver Revision: 6.31
> >> >> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> >> >> PIIX4: IDE controller on PCI bus 00 dev a1
> >> >> PIIX4: chipset revision 1
> >> >> PIIX4: not 100% native mode: will probe irqs later
> >> >>     ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:DMA, hdb:pio
> >> >>     ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:DMA, hdd:pio
> >> >> hda: FUJITSU MPB3064ATU, ATA DISK drive
> >> >> hdc: Compaq CRD-8320B, ATAPI CD/DVD-ROM drive
> >> >> ide2: ports already in use, skipping probe
> >> >> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >> >> ide1 at 0x170-0x177,0x376 on irq 15
> >> >> blk: queue c03d97c4, I/O limit 4095Mb (mask 0xffffffff)
> >> >> hda: 12594960 sectors (6449 MB), CHS=833/240/63, UDMA(33)
> >> >> hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
> >> >> Uniform CD-ROM driver Revision: 3.12
> >> >> ide-floppy driver 0.99.newide
> >> >> Partition check:
> >> >>  hda: hda1 hda2 < hda5 hda6 hda7 >
> >> >> Floppy drive(s): fd0 is 1.44M
> >> >> FDC 0 is a National Semiconductor PC87306
> >> >> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
> >> >> loop: loaded (max 8 devices)
> >> >> plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
> >> >> NET3 PLIP version 2.4-parport gn...@mr...
> >> >> plip0: Parallel port at 0x378, not using IRQ.
> >> >> PPP generic driver version 2.4.2
> >> >> PPP Deflate Compression module registered
> >> >> PPP BSD Compression module registered
> >> >> Linux agpgart interface v0.99 (c) Jeff Hartmann
> >> >> agpgart: Maximum main memory to use for agp memory: 204M
> >> >> agpgart: Detected Intel 440BX chipset
> >> >> agpgart: AGP aperture is 64M @ 0x44000000
> >> >> [drm] Initialized tdfx 1.0.0 20010216 on minor 0
> >> >> [drm] AGP 0.99 on Intel 440BX @ 0x44000000 64MB
> >> >> [drm] Initialized radeon 1.1.1 20010405 on minor 1
> >> >> [drm] AGP 0.99 on Intel 440BX @ 0x44000000 64MB
> >> >> [drm] Initialized i810 1.2.0 20010920 on minor 2
> >> >> ide-floppy driver 0.99.newide
> >> >> es1371: version v0.30 time 08:51:53 Feb 21 2003
> >> >> usb.c: registered new driver usbdevfs
> >> >> usb.c: registered new driver hub
> >> >> uhci.c: USB Universal Host Controller Interface driver v1.1
> >> >> PCI: Found IRQ 11 for device 00:14.2
> >> >> uhci.c: USB UHCI at I/O 0x2400, IRQ 11
> >> >> usb.c: new USB bus registered, assigned bus number 1
> >> >> hub.c: USB hub found
> >> >> hub.c: 2 ports detected
> >> >> usb.c: registered new driver serial
> >> >> usbserial.c: USB Serial support registered for Generic
> >> >> usbserial.c: USB Serial Driver core v1.4
> >> >> mice: PS/2 mouse device common for all mice
> >> >> NET4: Linux TCP/IP 1.0 for NET4.0
> >> >> IP Protocols: ICMP, UDP, TCP
> >> >> IP: routing cache hash table of 2048 buckets, 16Kbytes
> >> >> TCP: Hash tables configured (established 16384 bind 16384)
> >> >> IPv4 over IPv4 tunneling driver
> >> >> ip_conntrack version 2.1 (2048 buckets, 16384 max) - 292 bytes per
> conntrack
> >> >> ip_tables: (C) 2000-2002 Netfilter core team
> >> >> arp_tables: (C) 2002 David S. Miller
> >> >> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> >> >> MPLS version 1.172 11/14/2002 jl...@mi...
> >> >> kjournald starting.  Commit interval 5 seconds
> >> >> EXT3-fs: mounted filesystem with ordered data mode.
> >> >> VFS: Mounted root (ext3 filesystem) readonly.
> >> >> Freeing unused kernel memory: 120k freed
> >> >> Adding Swap: 279680k swap-space (priority -1)
> >> >> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
> >> >> kjournald starting.  Commit interval 5 seconds
> >> >> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
> >> >> EXT3-fs: mounted filesystem with ordered data mode.
> >> >> 8139too Fast Ethernet driver 0.9.26
> >> >> PCI: Found IRQ 11 for device 00:0d.0
> >> >> eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xd0868000, 00:10:b5:b8:e9:e5,
> >> >> IRQ 11
> >> >> eth0:  Identified 8139 chip type 'RTL-8139B'
> >> >> eth0: Setting 100mbps half-duplex based on auto-negotiated partner
> ability
> >> >> 40a1.
> >> >> Where are MPLS debug info?Which are they?
> >> >> After i've done 
> >> >> [root@localhost root]# cd /home/efacchin/iproute2
> >> >> [root@localhost iproute2]# which ip
> >> >> /sbin/ip
> >> >> I've also tryed to do 
> >> >> [root@localhost utils]# cat /proc/net/mpls_in
> >> >> [root@localhost utils]# cat /proc/net/mpls_out
> >> >> [root@localhost utils]# cat /proc/net/mpls_*
> >> >> 01010702
> >> >> [root@localhost utils]# cat /proc/net/mpls*
> >> >> 01010702
> >> >> What's happened?
> >> >> How can i see MPLS header with ethereal?
> >> >> I've tryed to send packets pinging 10.0.3.17 and setting host 10.0.3.100
> >> >> on ethereal to see what my pc sends and setting ethereal to decode
> packets
> >> >> like MPLS. I've seen that in the field Info it writes Maldformed Frame
> >> >> 
> >> >> >-- Messaggio Originale --
> >> >> >Date: Mon, 24 Mar 2003 11:01:01 -0600
> >> >> >From: "James R. Leu" <jl...@mi...>
> >> >> >To: e7...@ti...
> >> >> >Cc: mpl...@li...
> >> >> >Subject: Re: [mpls-linux-general] HELP ME PLEASE!!!
> >> >> >Reply-To: jl...@mi...
> >> >> >
> >> >> >
> >> >> >On Mon, Mar 24, 2003 at 11:00:03AM +0100, e7...@ti... wrote:
> >> >> >> Hi everybody
> >> >> >>  I'm new using mplsadm and i've many problems with it
> >> >> >> Like i've told you in my precedent mails i've tryed to make a lsp
> >> from
> >> >> >a
> >> >> >> pc (10.0.3.100) to another (10.0.3.17)
> >> >> >> I've done
> >> >> >>  mplsadm -A -O 0
> >> >> >>  mplsadm -O key1 -o push:gen:16:set:eth0:ipv4:192.168.8.197
> >> >> >>  mplsadm -A -I gen:17:0
> >> >> >>  mplsadm -L eth0:0
> >> >> >
> >> >> >Do you mean mplsadm2 or mplsadm?
> >> >> >What is the output from these commands?
> >> >> >
> >> >> >Turn on mpls kernel debugging before issuing these commands then
> >> >> >check the output of 'dmesg'.
> >> >> >
> >> >> >
> >> >> >> [root@localhost root]# ip route show
> >> >> >> i've done it and the result is :
> >> >> >
> >> >> >Is this your mpls enabled version of 'ip'?
> >> >> >Do a 'which ip' does it point to the version of 'ip' that was built
> >> >> >from the patched version of iproute2?
> >> >> >
> >> >> >> [root@localhost root]# cat /proc/net/mpls*
> >> >> >> 01010702
> >> >> >> [root@localhost root]# ip route show
> >> >> >> 10.0.3.57 via 10.0.3.100 dev eth0  scope link
> >> >> >> 10.0.3.57 via 10.0.3.100 dev eth0
> >> >> >> 10.0.3.17 via 10.0.3.100 dev eth0  scope link
> >> >> >> !!!Deficit 4, rta_len=10
> >> >> >
> >> >> >See above.
> >> >> >
> >> >> >> What does "scope link " mean?
> >> >> >
> >> >> >Read the 'ip' man page.
> >> >> >
> >> >> >> -------------------------------------------------------
> >> >> >> This sf.net email is sponsored by:ThinkGeek
> >> >> >> Welcome to geek heaven.
> >> >> >> http://thinkgeek.com/sf
> >> >> >> _______________________________________________
> >> >> >> mpls-linux-general mailing list
> >> >> >> mpl...@li...
> >> >> >> https://lists.sourceforge.net/lists/listinfo/mpls-linux-general
> >> >> >
> >> >> >-- 
> >> >> >James R. Leu
> >> >> 
> >> >> 
> >> >> __________________________________________________________________
> >> >> Tiscali ADSL, fino a 9 MESI GRATIS sull'offerta Tiscali ADSL Light
> Mega!
> >> >> Tiscali ADSL non teme confronti! Abbonati subito.
> >> >> http://point.tiscali.it/adsl/index.shtml
> >> >> 
> >> >> 
> >> >
> >> >-- 
> >> >James R. Leu
> >> 
> >> 
> >> __________________________________________________________________
> >> Tiscali ADSL, fino a 9 MESI GRATIS sull'offerta Tiscali ADSL Light Mega!
> >> Tiscali ADSL non teme confronti! Abbonati subito.
> >> http://point.tiscali.it/adsl/index.shtml
> >> 
> >> 
> >
> >-- 
> >James R. Leu
> >
> >
> >-------------------------------------------------------
> >This sf.net email is sponsored by:ThinkGeek
> >Welcome to geek heaven.
> >http://thinkgeek.com/sf
> >_______________________________________________
> >mpls-linux-general mailing list
> >mpl...@li...
> >https://lists.sourceforge.net/lists/listinfo/mpls-linux-general
> 
> 
> __________________________________________________________________
> Tiscali ADSL, fino a 9 MESI GRATIS sull'offerta Tiscali ADSL Light Mega!
> Tiscali ADSL non teme confronti! Abbonati subito.
> http://point.tiscali.it/adsl/index.shtml
> 
> 

-- 
James R. Leu