Re: [mpls-linux-general] a question about the ldp-portable-0.2

[Paresh P. <par...@ya...>]

I did this on both the PCs connected by croos-cable
and issued show ldp neighbor
But I got reply as "No Discovered neighbor"

How to get it working?

Paresh

--- "James R. Leu" <jl...@mi...> wrote:
> Currently ldp-portable has a bug which will not
> allow it to correctly read
> a config file.  You will need to start mplsd then
> configure it by hand.
> 
> In you setup below, you would telnet to port 1025
> then login and execute
> the following commands:
> 
> enable
> <password>
> conf t
> mpls ldp
> exit
> int eth1
> mpls ldp
> end
> 
> Then you can issue show commands: show ldp, show ldp
> neighbor,
> show ldp database
> 
> Good luck.
> 
> On Thu, Sep 26, 2002 at 02:26:40PM +0800, Folke Aeon
> wrote:
> > hi, all
> > 
> >   i am new commr of this community. :)
> > 
> >   i am trying to use ldp-portable packet to setup
> > a lsp .
> > 
> >   i did all according to the README.zebra-ldp and
> > all things happened seemed to be proper:
> >   patched the zebra cleanly without error notice;
> >   compiled all the components correctly;
> >   i have a kernel-2.4.19 patched with mpls patch
> 1.160;
> >   i can use mplsadm to setup a static lsp through
> > my linux systems.
> > 
> >   but after i run:
> >      zebra -f /etc/zebra.conf -P 1023 -d
> >      ospdd -f /etc/ospfd.conf -P 1024 -d
> >      mplsd -f /etc/mplsd.conf -P 1025
> >   as directed in the README.zebra-ldp shipped with
> > ldp-portable-0.200.tar.gz, nothing happened.i
> cannot
> > see anything by 'cat /proc/net/mpls*', and there
> is
> > no packets going through between my computers
> seems
> > to be a hello message or label request message of
> > the LDP defined in RFC3036
> > 
> >   i think ,maybe i did't write the *.conf file
> > properly. will anyone here help me to write
> > the correct config file for mplsd?
> > 
> >   my network topology is :
> > 
> > #
> > #   11.0.0.0/24
> > # -+--------------
> > #  |             eth0
> > #  |               +--------+
> > #  +---------------+ host A +                     
>    13.0.0.0/8 |
> > #  |   11.0.0.18/24+--------+                    
> ---------------+
> > #  |                                              
>               |
> > #  |           eth0                        eth0   
>               |
> > #  | 11.0.0.80/24+-------+       
> 12.0.0.2/8+-------+            |
> > #  +-------------+ 11-12 +------------------+
> 12-13 +------------+
> > #  |             +-------+12.0.0.1/8       
> +-------+13.0.0.1/8  |
> > # -+---                 eth1                      
> eth1          |
> > #                                                 
>               |
> > #   15.0.0.0/8                                    
>               |
> > # -+---------------                               
>               |
> > #  |           eth1                        eth1   
>               |
> > #  |  15.0.0.1/8+--------+       
> 14.0.0.1/8+-------+            |
> > #  +------------+ host B +------------------+
> 13-14 +------------+
> > #  |            +--------+14.0.0.2/8       
> +-------+13.0.0.2/8  |
> > #  |                    eth0                     
> eth0           |
> > # -+---
> > 
> >      how to write the proper mplsd.conf on host
> 12-13
> > and host 13-14 ?
> > 
> >   any help is appreciated :)
> > 
> >
>
_________________________________________________________________
> > MSN Photos is the easiest way to share and print
> your photos: 
> > http://photos.msn.com/support/worldwide.aspx
> > 
> > 
> > 
> >
>
-------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > mpls-linux-general mailing list
> > mpl...@li...
> >
>
https://lists.sourceforge.net/lists/listinfo/mpls-linux-general
> 
> -- 
> James R. Leu
> 
> 
>
-------------------------------------------------------
> This sf.net email is sponsored by: DEDICATED SERVERS
> only $89!
> Linux or FreeBSD, FREE setup, FAST network. Get your
> own server 
> today at http://www.ServePath.com/indexfm.htm
> _______________________________________________
> mpls-linux-general mailing list
> mpl...@li...
>
https://lists.sourceforge.net/lists/listinfo/mpls-linux-general


__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com