Re: [mpls-linux-general] trouble setting up LSPs

[James R. L. <jl...@mi...>]

Suggested changes inline:

> 
> 10.0.0.10 (eth0)	10.0.1.20 (eth1)
> A---------------------B---------------------C
> 	10.0.0.20 (eth0)	10.0.1.30 (eth1)
>
> On A:
> =====
> mplsadm2 -vAO 0 -o push:gen:16:set:eth0:ipv4:10.0.1.30 # returns <key1>
                                               ^^^^^^^^^
                                               10.0.0.20?

> ip2 route add 10.0.1.30/32 via 10.0.0.20 lsp <key1>
> mplsadm2 -vAI gen:20:0
> mplsadm2 -vL eth0:0
> 
> On B:
> =====
> # for LSP from A to C
> mplsadm2 -vAI gen:16:0
> mplsadm2 -vAO 0 -o push:gen:16:set:eth1:ipv4:10.0.1.30 # returns <key2>
> mplsadm2 -vI gen:16:0 -o <key2> -B
> mplsadm2 -vL eth1:0
> 
> # for LSP from C to A
> mplsadm2 -vAI gen:20:0
> mplsadm2 -vAO 0 -o push:gen:20:set:eth0:ipv4:10.0.0.10 # returns <key3>
> mplsadm2 -vI gen:20:0 -o <key3> -B
> mplsadm2 -vL eth0:0
> 
> On C:
> =====
> mplsadm2 -vAI gen:16:0
> mplsadm2 -vAO 0 -o push:gen:20:set:eth1:ipv4:10.0.0.10 # returns <key4>
                                               ^^^^^^^^^
                                               10.0.1.20?

> ip2 route add 10.0.0.10/32 via 10.0.1.20 lsp <key4>
> mplsadm2 -vL eth1:0

Check my suggested changes.  If it still doesn't work, send the contents
of /proc/net/mpls_*

Jim
-- 
James R. Leu