[mpls-linux-general] help on ldp(helllllllllllp)

[farahmand z. <z_c...@ya...>]

Hi jim n all,

I really need your help , my ldp-portable doesn't work properly and I don't know what is wrong?!
I have redhat 7.2 with kernel 2.4.13 (MPLS patched).I got the latest ldp-portable via CVS ,first, I have a simple question:I compiled ldp-portable in directory ldp-portable by typing "make ldp_linux" and it was compiled successfully,is it compiled with MPLS_LINUX ?How can I make sure?(The first line in the Makefile in directory ldp-portable:CFLAGS = -g -I. -wall -D__LDP_LINUX__ -Werror
#-DMPLS_LINUX).

I have configured 2 machines as follows :


 lo 10.0.0.1                                 lo 10.0.0.2
    ----------                                 -----------
   |   A      |------------------------------|    B      |
    ----------                                 -----------
 .206  |      192.168.2.0/24          .207|         
------------------------------------------------------------

PC B:

bash# ip addr add 10.0.0.2/32 dev lo
bash#ip route add 10.0.0.1/32 via 192.168.2.206

routing table in PC B:

Des                       Gateway         Genmask                  Flags          Metric         Ref              Use         Interface

10.0.0.1                  sunrise          255.255.255.255          UGH            0              0                0            eth0
192.168.2.0                *               255.255.255.0             U             0              0                0            eth0
127.0.0.0                  *               255.0.0.0                 U             0              0                0             lo 
default                   itrcprox3.itrc   0.0.0.0                   UG            0              0                0            eth0

./mplsadm -L eth0:0

prompt> add global 10.0.0.2
ENTER : ##args##
EXIT : ##args##
ENTER : ##args##
EXIT : ##args##
ENTER : ##args##
ENTER : ##args##
Adding interface lo
Adding interface eth0
Adding route 0a000001/32 via 2
Adding route c0a80200/24 via 2
Adding route 7f000000/8 via 1
Adding route 00000000/0 via 2
Adding route 0a000002/32 via 1
EXIT : ##args##
EXIT : ##args##
ENTER : ##args##
EXIT : ##args##
Adding global object with LSRID 0a000002

prompt>set trace 0xffffffff
Set tracing flag to ffffffff

prompt>add interface eth0
Adding interface eth0

prompt>show session
2 c0a802ce 45 5

prompt>show database
1              0a000001/32 2 via2                
2              0a000002/32 3 via2
3              7f000000/8  3 via2
4              c0a80200/24 3 via2
5              7f000000/8  2 via2
6              c0a80200/24 2 via2

prompt>show route
0a000001/32 via c0a802ce:2
0a000002/32 via 00000000:1
7f000000/8 via 00000000:1
c0a80200/24 via 00000000:2
00000000/0 via c0a80201:2


prompt>show interface
2 eth0

I can see HELLO,INIT,KEEP ALIVE,ADDRESS,LABEL MAPPING messages,but all files in /proc/net/mpls_*
are empty. 

Any help from you are greately appriciated.I'm waiting to hear from you and thank you inadvance.

Best Regards,

Zahra Farahmand. 




---------------------------------
Do You Yahoo!?
Yahoo! Shopping - Mother's Day is May 12th!