Re: [mpls-linux-general] Routing over Linux
Status: Beta
Brought to you by:
jleu
From: anish v. <ani...@re...> - 2002-04-04 04:57:11
|
hi, abt configuring router u can check the entry in file /proc/sys/net/ipv4/ip_forward. if it's one then it's on otherwise it's off. hope this help anish On Wed, 03 Apr 2002 Daniel Gregorio Catalan wrote : >(First of all, sorry for my english) > >Hi! I'm making a network with 3 PC's with Linux-MPLS installed >over kernel >2.4.13 in Red Hat Linux 7.1, now I'm testing the network before >configuring >it with 'mplsadm' and I have some questions. The PC's have 2 >ethernet cards >in order to make the 'router' interfaces. I don't activate them >at boottime, >I activate them with the 'ifconfig' command. > >- I can't ping from one side to other side of the network, that >is if I have >the following network, >1 ----- 2 ----- 3 I can ping between 2 and 3, and between 1 and >2 but I >can't ping between 1 and 3, and I can't ping between 1 and the 2 >to 3 >interface too, and I can't ping between 3 and 2 to 1 interface >too. (it says >that network is unreachable) > >I think that I have to activate routing, but I have seen with the >'network >configuration' utility (in gnome system menu) that it is >activated in PC >number 2 but it doesn't work. Have I activated routing properly? >Where can I >check if routing is activated? and if I don`t have activated it, >how can I >activate routing properly? > >- When I am configuring the ethernet cards (IP address, >netmask, >gateways,...) to make a normal network, I have to put IP >addresses that >belong to different networks (for the cards of a particular PC), >this is >10.1.0.0 /16 (eth0)--- PC ---(eth1) 10.2.0.0 /16 but in a MPLS >network >there isn't routers, they are all switches, so I suppose that all >the >interfaces in a MPLS network (one MPLS domain) will have IP >addresses that >belong to the same network. Is this correct?, or >Do I have to put the cards' addresses in the same way as if they >were normal >routers (different net address) when I make the MPLS network? > >Can someone help me? Best regards > >Dani > > >_______________________________________________ >mpls-linux-general mailing list >mpl...@li... >https://lists.sourceforge.net/lists/listinfo/mpls-linux-general |