Re: [mpls-linux-general] mpls-linux-0.990 setup problems

[James R. L. <jl...@mi...>]

Are you trying to do ingress filtering based on bandwidth or are you
just tring to do a basic ingress LER <-> LSR <-> egress LER?

If you tring to ingress filter based on bandwidth then README.ingress
is the correct place to start.  If your just trying to build a simple
LER/LSR/LER example utils/README.example is the one you want to look at.

On Mon, Jun 04, 2001 at 10:49:53AM -0600, jk swamy wrote:
> hi all,
> I have downloaded mpls on linux ( mpls-linux-0.990 ) from
> www.sourceforge.net.
> I have configured the mpls setup as given in README.ingress file.
> What I did is configured 2 tcp nodes , 2 LERs and 1 LSR. I used two ethernet
> cards on each of LSR and LER.
> My linux kernel 2.4.3 also detects all these ethernet cards.
> 
> My problem is that when I run the script on each of this nodes according to
> README.ingress file running some application like PING or ftp to the end node
> Host B it gives an error message that 
> " Destination address unreachable"from (LER A ip node ).
> 
> I hope if any of U tried this package can help me accordingly.
> My requirement is to demonstrate MPLS label switching with a small setup
> if any of U have alternate solutions let me know.

I haven't tried ingress filtering in a long time.  Could one of the original
users of it verify that it still works?

Thanks,
Jim
-- 
James R. Leu