Re: [mpls-linux-devel] mpls-quagga+ldp,

[Pali <pal...@gm...>]

Hi,
I was compiling quagga+ldp from sources on Debian Lenny 2.6.26-2-686, x86
architecture. I didn't compile project successfully yet, but maybe some
information will be useful for You.

*installation.txt *= steps I have done are written inside
**.log* = output of various commands

All my project with files mentioned above hangs here:
http://www.localnet.sk/~maestro/dnl/skola/dp/src/quagga_mpls_ldp.tgz<http://www.localnet.sk/%7Emaestro/dnl/skola/dp/src/quagga_mpls_ldp.tgz>





2009/12/12 Bojana Petrovic <bo...@gm...>

> Hi everybody,
>
> I'm trying very hard these weeks to set mpls-quagga and LDP work on Fedora
> 8 (mpls-kernel 2.6.26.6-49.fc8.mpls.1.962) and I'm facing following
> problems.
> I read carefully old posts, and have made conclusion that recent problems
> are connected with Fedora 10, so I realized that solution for F8 might work.
> According to this list I tried following attempts:
> 1) Downloaded from http://repo.or.cz/
>   mpls-ldp-portable-60f294f3e2263031be4e7de64e57dd4b721a72d7.tar.gz
>   mpls-quagga-c1ff1abca7f16db0fbbb64ef07cbfefa44e03cb4.tar.gz
> and compiled according to instructions
>
>    - change variable DEFSRC in ldpd/create-links file to ldp-portable
>    directory and execute "create-link" script.
>    - chmod 777 bootstrap.sh
>    - ./bootstrap.sh
>    - ./configure
>    - make
>    - make install
>
> I didn't recognized any of errors, but I cannot access to the LDP daemon. I
> can run all other daemons (zebra, ospfd...). But I can not use LDPD??
>
> 2) I tried to use *make-rpm-jleu* batch file, but I met following error:
> *install: cannot stat
> `/usr/src/redhat/BUILD/quagga-0.99.11/redhat/ldpd.init': No such file or
> directory
> *Is that possible to make RPM in this way? Are there something that should
> be done before running this script?
>
> 3) I tried to apply quagga-mpls.diff to the quagga source distribution
> (0.99.6), and did simple: *patch -p1 < quagga-mpls.diff*:
> I found that some files cannot be successfuly patched and met errors
> similar like this one:
>
> *11 out of 42 hunks FAILED -- saving rejects to file zebra/zebra_rib.c.rej
> can't find file to patch at input line 76700
> Perhaps you used the wrong -p or --strip option?
> The text leading up to this was:
> --------------------------
> |diff -uNr --exclude=.p4config --exclude=make-rpm-jleu
> --exclude=update-from-kernel.sh quagga/zebra/zebra_routemap.c
> quagga-mpls/zebra/zebra_routemap.c
> |--- quagga/zebra/zebra_routemap.c      2007-06-14 05:02:14.000000000 -0500
> |+++ quagga-mpls/zebra/zebra_routemap.c 2008-02-19 22:55:08.000000000 -0600
> -------------------*-------
> *File to patch: *
>
> Cause non of these attempts weren't successful, please, can anyone point
> what I'm doing wrong or offer to us some alternative solution?
> I'm ready to accept any of combination - Fedora distributions 5/8/10,
> mpls-kernels, and quagga version just to make this work.
> I can see that many people facing similar problem and I'm wondering does
> anybody have some combination running succsseful?
>
> I would appriciate any advice,
>
> Best Regards
> Bojana Petrovic
>
>
> ------------------------------------------------------------------------------
> Return on Information:
> Google Enterprise Search pays you back
> Get the facts.
> http://p.sf.net/sfu/google-dev2dev
>
> _______________________________________________
> mpls-linux-devel mailing list
> mpl...@li...
> https://lists.sourceforge.net/lists/listinfo/mpls-linux-devel
>
>


-- 
Ak si prajes aby som cital tvoj mail do 5 min, tak napis do predmetu X5.
Na skype som dostupny stale, len mi daj vediet aby som sa prihlasil.

<< 0903 48 47 40 >> mobil
<< 309458351 >> icq
<< ortseamo >> skype