Re: [mpls-linux-devel] ldpd crash and could not start again
Status: Beta
Brought to you by:
jleu
Menu
▾
▴
Re: [mpls-linux-devel] ldpd crash and could not start again
|
From: 刘磊 <orp...@ms...> - 2008-05-08 01:42:51
|
I just follow the example in the ldp-portable readme.
____________________________________________________ldpd config____________________________________
hostname uml-2-mpls
password root
enable password root
!
mpls ldp
!
interface lo
!
interface eth0
!
interface eth1
mpls ip
!
interface eth2
mpls ip
!
interface eth3
mpls ip
!
interface dummy0
!
line vty
exec-timeout 0 0
----------------------------------------------------------------------------------------------
BUT crash and can not start again.
Follow your last mail, I change the config to the below
-----------------------------------------------------------------------------------------------
!
hostname uml-1
password root
enable password root
!
interface eth0
mpls ip
!
interface eth1
!
interface eth2
!
interface lo
!
line vty
!
------------------------------------------------------------------------------------------------
And ldpd can start, telnet ldpd shell " en, conf t, mpls ldp " to active LDP instance. It seems OK.
BUT if I write to save the running-config, ldpd can not start again.
How to solved it? Is only to start ldpd by telnet on each system boot?
Where is the development tree I can fetch?
==========================================
localhost zenki # p4 client
Perforce client error:
Connect to server failed; check $P4PORT.
TCP connect to p4.dangermen.com failed.
p4.dangermen.com: host unknown.
==========================================
----------------------------------------
> Date: Wed, 7 May 2008 07:49:14 -0500
> From: jl...@mi...
> To: @mindspring.com
> CC: mpl...@li...
> Subject: Re: [mpls-linux-devel] ldpd crash and could not start again
>
> You must start zebra before ospfd or ldpd. Also make sure you start
> with an 'empty' ldpd config (just hostname and interfaces) there is a
> bug with ldpd (which is fixed in the development tree), that is does not
> start if there is an existing config.
>
> On Wed, May 07, 2008 at 10:14:04AM +0000, =?GB2312?B?wfXA2iA8b3JwaGVuX2xlaWxpdUBtc24uY29tPg==?= wrote:
>>
>> Hi all.
>> Thank you for help.
>> I patch the quagga-mpls.diff to quagga-0.99.6 and configure && make it.
>> BUT I found that when I telnet to the shell of zebra, ldpd will crash and can not start again.
>> If I start ldpd and ospfd, telnet any are ok.
>> But I start zebra after above two, and telnet to 2601(zebra's shell port), ldpd crashed.
>> The strace of start ldpd again is follow:
>> ===================================================================
>> execve("/sbin/ldpd", ["ldpd", "-d", "-u", "root", "-f", "/etc/ldpd.conf"], [/* 9 vars */]) = 0
>> brk(0) = 0x8083000
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7fdf000
>> access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/tls/i686/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/tls/i686/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/tls/i686/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/tls/i686", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/tls/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/tls/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/tls/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/tls", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/i686/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/i686/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/i686/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/i686", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/quagga/quagga-0.99.6/install/lib/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/quagga/quagga-0.99.6/install/lib", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/etc/ld.so.cache", O_RDONLY) = -1 ENOENT (No such file or directory)
>> open("/lib/tls/i686/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/tls/i686/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/tls/i686/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/tls/i686", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/tls/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/tls/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/tls/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/tls", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/i686/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/i686/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/i686/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/i686", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/sse2/libzebra.so.0", O_RDONLY) = -1 ENOENT (No such file or directory)
>> stat64("/lib/sse2", 0xbfad4778) = -1 ENOENT (No such file or directory)
>> open("/lib/libzebra.so.0", O_RDONLY) = 3
>> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\374\302\0\0004\0\0\0"..., 512) = 512
>> fstat64(3, {st_mode=S_IFREG|0755, st_size=609544, ...}) = 0
>> mmap2(NULL, 245608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7fa3000
>> mmap2(0xb7fd7000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34) = 0xb7fd7000
>> mmap2(0xb7fdd000, 8040, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7fdd000
>> close(3) = 0
>> open("/lib/libcap.so.1", O_RDONLY) = 3
>> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\n\0\0004\0\0\0"..., 512) = 512
>> fstat64(3, {st_mode=S_IFREG|0755, st_size=9544, ...}) = 0
>> mmap2(NULL, 13140, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f9f000
>> mmap2(0xb7fa1000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb7fa1000
>> close(3) = 0
>> open("/lib/libm.so.6", O_RDONLY) = 3
>> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@4\0\0004\0\0\0"..., 512) = 512
>> fstat64(3, {st_mode=S_IFREG|0755, st_size=161544, ...}) = 0
>> mmap2(NULL, 163968, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f76000
>> mmap2(0xb7f9d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x26) = 0xb7f9d000
>> close(3) = 0
>> open("/lib/libcrypt.so.1", O_RDONLY) = 3
>> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\6\0\0004\0\0\0"..., 512) = 512
>> fstat64(3, {st_mode=S_IFREG|0755, st_size=21820, ...}) = 0
>> mmap2(NULL, 184636, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f48000
>> mmap2(0xb7f4d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4) = 0xb7f4d000
>> mmap2(0xb7f4f000, 155964, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f4f000
>> close(3) = 0
>> open("/lib/libc.so.6", O_RDONLY) = 3
>> read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200a\1\0004\0\0\0"..., 512) = 512
>> fstat64(3, {st_mode=S_IFREG|0755, st_size=1372476, ...}) = 0
>> mmap2(NULL, 1377768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7df7000
>> mmap2(0xb7f42000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14b) = 0xb7f42000
>> mmap2(0xb7f45000, 9704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f45000
>> close(3) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7df6000
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7df5000
>> set_thread_area({entry_number:-1 -> 6, base_addr:0xb7df6b30, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
>> mprotect(0xb7f42000, 8192, PROT_READ) = 0
>> mprotect(0xb7f4d000, 4096, PROT_READ) = 0
>> mprotect(0xb7f9d000, 4096, PROT_READ) = 0
>> mprotect(0xb7fa1000, 4096, PROT_READ) = 0
>> mprotect(0xb7ffd000, 4096, PROT_READ) = 0
>> umask(027) = 022
>> geteuid32() = 0
>> brk(0) = 0x8083000
>> brk(0x80a4000) = 0x80a4000
>> socket(PF_FILE, SOCK_DGRAM, 0) = 3
>> fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
>> connect(3, {sa_family=AF_FILE, path="/dev/log"}, 110) = -1 EPROTOTYPE (Protocol wrong type for socket)
>> close(3) = 0
>> socket(PF_FILE, SOCK_STREAM, 0) = 3
>> fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
>> connect(3, {sa_family=AF_FILE, path="/dev/log"}, 110) = 0
>> socket(PF_FILE, SOCK_STREAM, 0) = 4
>> fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
>> connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
>> close(4) = 0
>> socket(PF_FILE, SOCK_STREAM, 0) = 4
>> fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
>> connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
>> close(4) = 0
>> open("/etc/nsswitch.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
>> open("/lib/libnss_compat.so.2", O_RDONLY) = 4
>> read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\r\0\0004\0\0\0"..., 512) = 512
>> fstat64(4, {st_mode=S_IFREG|0755, st_size=30324, ...}) = 0
>> mmap2(NULL, 33316, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0xb7dec000
>> mmap2(0xb7df3000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x6) = 0xb7df3000
>> close(4) = 0
>> open("/lib/libnsl.so.1", O_RDONLY) = 4
>> read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`/\0\0004\0\0\0"..., 512) = 512
>> fstat64(4, {st_mode=S_IFREG|0755, st_size=95884, ...}) = 0
>> mmap2(NULL, 108456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0xb7dd1000
>> mmap2(0xb7de8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x16) = 0xb7de8000
>> mmap2(0xb7dea000, 6056, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7dea000
>> close(4) = 0
>> mprotect(0xb7de8000, 4096, PROT_READ) = 0
>> mprotect(0xb7df3000, 4096, PROT_READ) = 0
>> open("/etc/nsswitch.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
>> open("/lib/libnss_nis.so.2", O_RDONLY) = 4
>> read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\30\0\0004\0\0\0"..., 512) = 512
>> fstat64(4, {st_mode=S_IFREG|0755, st_size=38348, ...}) = 0
>> mmap2(NULL, 41508, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0xb7dc6000
>> mmap2(0xb7dcf000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x8) = 0xb7dcf000
>> close(4) = 0
>> open("/lib/libnss_files.so.2", O_RDONLY) = 4
>> read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\27\0\0004\0\0\0"..., 512) = 512
>> fstat64(4, {st_mode=S_IFREG|0755, st_size=38304, ...}) = 0
>> mmap2(NULL, 41588, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0xb7dbb000
>> mmap2(0xb7dc4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x8) = 0xb7dc4000
>> close(4) = 0
>> mprotect(0xb7dc4000, 4096, PROT_READ) = 0
>> mprotect(0xb7dcf000, 4096, PROT_READ) = 0
>> open("/etc/passwd", O_RDONLY) = 4
>> fcntl64(4, F_GETFD) = 0
>> fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
>> _llseek(4, 0, [0], SEEK_CUR) = 0
>> fstat64(4, {st_mode=S_IFREG|0644, st_size=874, ...}) = 0
>> mmap2(NULL, 874, PROT_READ, MAP_SHARED, 4, 0) = 0xb7dba000
>> _llseek(4, 874, [874], SEEK_SET) = 0
>> munmap(0xb7dba000, 874) = 0
>> close(4) = 0
>> socket(PF_FILE, SOCK_STREAM, 0) = 4
>> fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
>> connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
>> close(4) = 0
>> socket(PF_FILE, SOCK_STREAM, 0) = 4
>> fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0
>> connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory)
>> close(4) = 0
>> open("/etc/nsswitch.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
>> open("/etc/nsswitch.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
>> open("/etc/group", O_RDONLY) = 4
>> fcntl64(4, F_GETFD) = 0
>> fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
>> _llseek(4, 0, [0], SEEK_CUR) = 0
>> fstat64(4, {st_mode=S_IFREG|0644, st_size=577, ...}) = 0
>> mmap2(NULL, 577, PROT_READ, MAP_SHARED, 4, 0) = 0xb7dba000
>> _llseek(4, 577, [577], SEEK_SET) = 0
>> munmap(0xb7dba000, 577) = 0
>> close(4) = 0
>> setregid32(500, 500) = 0
>> prctl(0x8, 0x1, 0, 0, 0) = 0
>> capset(0x19980330, 0, {0, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> rt_sigaction(SIGQUIT, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGQUIT, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGILL, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGILL, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGFPE, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGFPE, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGBUS, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGBUS, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGSEGV, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGSEGV, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGSYS, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGSYS, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGXCPU, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGXCPU, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGXFSZ, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGXFSZ, {0xb7fc9f7c, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGHUP, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGHUP, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGINT, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGINT, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGALRM, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGALRM, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGTERM, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGTERM, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGUSR1, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGUSR1, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGUSR2, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGUSR2, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGIO, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGIO, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGVTALRM, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGVTALRM, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGSTKFLT, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGSTKFLT, {0xb7fc9da0, ~[RTMIN RT_1], SA_SIGINFO}, NULL, 8) = 0
>> rt_sigaction(SIGPIPE, NULL, {SIG_DFL}, 8) = 0
>> rt_sigaction(SIGPIPE, {SIG_IGN}, NULL, 8) = 0
>> rt_sigaction(SIGHUP, {0xb7fc9d00, ~[RTMIN RT_1], SA_RESTART}, {0xb7fc9da0, ~[KILL STOP RTMIN RT_1], SA_SIGINFO}, 8) = 0
>> rt_sigaction(SIGUSR1, {0xb7fc9d00, ~[RTMIN RT_1], SA_RESTART}, {0xb7fc9da0, ~[KILL STOP RTMIN RT_1], SA_SIGINFO}, 8) = 0
>> rt_sigaction(SIGINT, {0xb7fc9d00, ~[RTMIN RT_1], SA_RESTART}, {0xb7fc9da0, ~[KILL STOP RTMIN RT_1], SA_SIGINFO}, 8) = 0
>> rt_sigaction(SIGTERM, {0xb7fc9d00, ~[RTMIN RT_1], SA_RESTART}, {0xb7fc9da0, ~[KILL STOP RTMIN RT_1], SA_SIGINFO}, 8) = 0
>> time(NULL) = 1009844358
>> getcwd("/root", 4096) = 6
>> open("/etc/ldpd.conf", O_RDONLY) = 4
>> fstat64(4, {st_mode=S_IFREG|0644, st_size=179, ...}) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7dba000
>> read(4, "hostname uml-2-mpls\npassword roo"..., 1024) = 179
>> socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 5
>> setsockopt(5, SOL_IP, IP_PKTINFO, "\1", 1) = 0
>> capset(0x19980330, 0, {CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> bind(5, {sa_family=AF_INET, sin_port=htons(646), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
>> capset(0x19980330, 0, {0, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> capset(0x19980330, 0, {CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> setsockopt(5, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
>> fcntl64(5, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
>> capset(0x19980330, 0, {0, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> capset(0x19980330, 0, {CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> setsockopt(5, SOL_IP, IP_MULTICAST_TTL, [1], 4) = 0
>> setsockopt(5, SOL_IP, IP_MULTICAST_LOOP, [0], 4) = 0
>> capset(0x19980330, 0, {0, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 6
>> capset(0x19980330, 0, {CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> setsockopt(6, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
>> fcntl64(6, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
>> capset(0x19980330, 0, {0, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> capset(0x19980330, 0, {CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> bind(6, {sa_family=AF_INET, sin_port=htons(646), sin_addr=inet_addr("0.0.0.0")}, 16) = 0
>> capset(0x19980330, 0, {0, CAP_SETGID|CAP_SETUID|CAP_NET_BIND_SERVICE|CAP_NET_BROADCAST|CAP_NET_ADMIN|CAP_NET_RAW, 0}) = 0
>> listen(6, 15) = 0
>> read(4, "", 1024) = 0
>> close(4) = 0
>> munmap(0xb7dba000, 4096) = 0
>> clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0xb7df6b78) = 441
>> --- SIGCHLD (Child exited) @ 0 (0) ---
>> exit_group(0) = ?
>> ==================================================================================
>> _________________________________________________________________
>> Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！
>> http://get.live.cn/product/photo.html
>
> --
> James R. Leu
> jl...@mi...
_________________________________________________________________
多个邮箱同步管理，live mail客户端万人抢用中
http://get.live.cn/product/mail.html
|
