Re: [mpls-linux-devel] What is the process of applying the mpls label to IP packet?
Status: Beta
Brought to you by:
jleu
Menu
▾
▴
Re: [mpls-linux-devel] What is the process of applying the mpls label to IP packet?
|
From: 刘磊 <orp...@ms...> - 2008-04-25 03:38:31
|
Solved. Thank You very much. Because I had lose the process in ip_output_finish2 when I patch MPLS-Linux to kernel-2.6.24. ---------------------------------------- > From: orp...@ms... > To: jl...@mi... > Date: Fri, 25 Apr 2008 01:19:27 +0000 > CC: mpl...@li... > Subject: Re: [mpls-linux-devel] What is the process of applying the mpls label to IP packet? > > > Thank you for help. > I'll try again. > BUT, I don't found the file /proc/net/mpls/debug, there is only one file in /proc/net named mpls. And it's create by "create_proc_entry(name_mpls, S_IFREG|S_IRUSR|S_IWUSR, proc_net);" in mpls_procfs.c. > > ---------------------------------------- >> Date: Thu, 24 Apr 2008 07:59:07 -0500 >> From: jl...@mi... >> To: @mindspring.com >> CC: mpl...@li... >> Subject: Re: [mpls-linux-devel] What is the process of applying the mpls label to IP packet? >> >> On Thu, Apr 24, 2008 at 02:20:37AM +0000, =?GB2312?B?wfXA2iA8b3JwaGVuX2xlaWxpdUBtc24uY29tPg==?= wrote: >>> >>> Hi, all >>> I had some problem in using MPLS-Linux, which NOT solved in general mail list. >>> What is the the process of applying the mpls label to IP packet, or in which function? >>> ip_route_input -> ip_route_input_slow -> ip_mkroute_input -> __mkroute_input -> rt_set_nexthop -> mpls_set_nexthop? -> mpls_set_nexthop2 ? -> mpls_switch ? -> mpls_output2 ? -> mpls_send ? >> >> rt_set_nexthop() is where we take the shim_blk from the matched route (dst) >> and modify the skb so that when ip_output_finish2() is called the >> check for the child dst is true and the packet gets redirected to mpls_output(). >> mpls_output2() processes the instructions attached to the NHLFE. If the >> instruction list contains PUSH, then mpls_push() is called and >> the label is pushed on to the packet. >> >> If you enable debugging (echo 1> /proc/net/mpls/debug) then you will >> see in the kernel log the calls to the various functions. >> >>> And follow is the problem what I had post in general mail list >>> ================================================ >>> Date: Wed, 23 Apr 2008 13:04:15 +0300 >>> From: adr...@gm... >>> To: orp...@ms... >>> Subject: Re: [mpls-linux-general] Does mpls-linux support for add label to normal IP packet? >>> CC: mpl...@li... >>> >>> It seems that no traffic passes through nhlfe 0x03. This is why you don't have any mpls labels. >>> >>> I can't really tell why it's not working... Sorry... >>> >>>> 2008/4/23 刘磊 : >>>> >>>> Thank You. I have do that you said. BUT I'm in HOST B, LER2. My ip address is 192.168.99.4/24 and 10.0.0.2. >>>> >>>> -bash-3.2# dmesg >>>> MPLS: version 1.958 >>>> MPLS: protocol driver interface - >>>> MPLS: IPv4 over MPLS support >>>> -bash-3.2# >>>> -bash-3.2# lsmod >>>> Module Size Used by Not tainted >>>> mpls4 3904 0 >>>> mpls 67240 1 mpls4 >>>> pcnet32 27332 0 >>>> e100 28620 0 >>>> e1000 105024 0 >>>> e1000e 80932 0 >>>> -bash-3.2# >>>> -bash-3.2# ip r >>>> 10.0.0.1 via 172.16.0.2 dev eth1 mpls 0x3 >>>> 172.16.0.0/24 dev eth1 proto kernel scope link src 172.16.0.3 >>>> 192.168.99.0/24 dev eth2 proto kernel scope link src 192.168.99.3 >>>> -bash-3.2# >>>> -bash-3.2# mpls nhlfe show >>>> NHLFE entry key 0x00000003 mtu 1496 propagate_ttl >>>> push gen 2000 set eth1 ipv4 172.16.0.2 (0 bytes, 0 pkts) >>>> NHLFE entry key 0x00000002 mtu 1500 propagate_ttl >>>> set eth2 ipv4 192.168.1.4 (0 bytes, 0 pkts) >>>> >>>> And after I had a ping in 10.0.0.2 >>>> -bash-3.2# ip r >>>> 10.0.0.1 via 172.16.0.2 dev eth1 mpls 0x3 >>>> 172.16.0.0/24 dev eth1 proto kernel scope link src 172.16.0.3 >>>> 192.168.99.0/24 dev eth2 proto kernel scope link src 192.168.99.3 >>>> -bash-3.2# mpls nhlfe show >>>> NHLFE entry key 0x00000003 mtu 1496 propagate_ttl >>>> push gen 2000 set eth1 ipv4 172.16.0.2 (0 bytes, 0 pkts) >>>> NHLFE entry key 0x00000002 mtu 1500 propagate_ttl >>>> set eth2 ipv4 192.168.1.4 (0 bytes, 0 pkts) >>>> -bash-3.2# >>>> -bash-3.2# ifconfig >>>> eth1 Link encap:Ethernet HWaddr 00:C0:5C:12:C4:0D >>>> inet addr:172.16.0.3 Bcast:0.0.0.0 Mask:255.255.255.0 >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:214 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:44 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:100 >>>> RX bytes:17444 (17.0 KiB) TX bytes:4298 (4.1 KiB) >>>> Base address:0xc400 Memory:ff780000-ff7a0000 >>>> >>>> eth2 Link encap:Ethernet HWaddr 00:C0:5C:12:C4:0E >>>> inet addr:192.168.99.3 Bcast:0.0.0.0 Mask:255.255.255.0 >>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>>> RX packets:1025 errors:0 dropped:0 overruns:0 frame:0 >>>> TX packets:263 errors:0 dropped:0 overruns:0 carrier:0 >>>> collisions:0 txqueuelen:100 >>>> RX bytes:77966 (76.1 KiB) TX bytes:49836 (48.6 KiB) >>>> Base address:0xc000 Memory:ff740000-ff760000 >>>> >>>> And tcpdump in LER2's eth1 (to LER1's 172.16.0.2) >>>> >>>> 00:20:18.333708 IP 10.0.0.2> 10.0.0.1: ICMP echo request, id 59752, seq 27, length 64 >>>> 0x0000: 4500 0054 0000 4000 3f01 27a7 0a00 0002 >>>> 0x0010: 0a00 0001 0800 df87 e968 001b 5f05 0f48 >>>> 0x0020: c9a3 0c00 0809 0a0b 0c0d 0e0f 1011 1213 >>>> 0x0030: 1415 1617 1819 >>>> 00:20:19.321941 arp who-has 172.16.0.2 tell 172.16.0.3 >>>> 0x0000: 0001 0800 0604 0001 00c0 5c12 c40d ac10 >>>> 0x0010: 0003 0000 0000 0000 ac10 0002 >>>> 00:20:19.322301 arp reply 172.16.0.2 is-at 00:0c:29:ef:a2:98 >>>> 0x0000: 0001 0800 0604 0002 000c 29ef a298 ac10 >>>> 0x0010: 0002 00c0 5c12 c40d ac10 0003 0000 0000 >>>> 0x0020: 0000 0000 0000 0000 0000 0000 0000 >>>> 00:20:19.333624 IP 10.0.0.2> 10.0.0.1: ICMP echo request, id 59752, seq 28, length 64 >>>> 0x0000: 4500 0054 0000 4000 3f01 27a7 0a00 0002 >>>> 0x0010: 0a00 0001 0800 de86 e968 001c 6005 0f48 >>>> 0x0020: c9a3 0c00 0809 0a0b 0c0d 0e0f 1011 1213 >>>> 0x0030: 1415 1617 1819 >>>> >>>> There was no MPLS-DATA in the packet, and the packet forward to 172.16.0.2 in original IP packet. >>>> ________________________________ >>>>> Date: Wed, 23 Apr 2008 11:37:57 +0300 >>>>> From: adr...@gm... >>>>> To: orp...@ms... >>>>> Subject: Re: [mpls-linux-general] Does mpls-linux support for add label to normal IP packet? >>>>> CC: mpl...@li... >>>>> >>>>> Ok, concentrate on LER1; >>>>> It will encapsulate in MPLS only packets that go to 10.0.0.2/32. The rest of the traffic will be plain IP. >>>>> >>>>> Try again and look for error messages after each command. Make sure you're running the mpls-enabled kernel (dmesg | grep mpls) and also that you have the mpls4 module loaded (lsmod | grep mpls). >>>>> >>>>> After starting a ping to 10.0.0.2 issue these commands on ler1: >>>>> mpls nhlfe show >>>>> ip route show >>>>> >>>>> If all is setup correctly, tcpdump will show the MPLS header between Ethernet and IP. >>>>> >>>>> You only need iptables if you want to create more specific rules to use for MPLS. Something like you want only FTP traffic to go through MPLS or you want traffic from source X to go through MPLS, etc. You can use iproute to specify that you want traffic going to destination X to go through MPLS. >>>>> >>>>> Cheers, >>>>> Adrian >>>>> >>>>> 2008/4/23 刘磊 : >>>>> >>>>> Hello >>>>> Thank You first. >>>>> I had tried "IPv4 over MPLS: two LER example for mpls-linux-1.95x", same as the example. >>>>> BUT, I had not find in the packets(above the ether layer, and below the IP layer) out from LER1's eth2 by tcpdump. >>>>> Does it's MUST with iptables to do this? >>>>> >>>>> ________________________________ >>>>>> Date: Wed, 23 Apr 2008 09:25:18 +0300 >>>>>> From: adr...@gm... >>>>>> To: orp...@ms... >>>>>> Subject: Re: [mpls-linux-general] Does mpls-linux support for add label to normal IP packet? >>>>>> CC: mpl...@li... >>>>>> >>>>>> Hello, >>>>>> >>>>>> The mpls command allows you to create labels and the route/iptables commands allow you to map certain IP flows to created labels. >>>>>> Please, better explain your problem (which example you used), and what was the problem so that we can better help. >>>>>> >>>>>> For a small overview of what mpls-linux does and how to use it, look here: >>>>>> http://mpls-linux.sourceforge.net/ >>>>>> http://www.elcom.pub.ro/~adrian.popa/mpls-linux/mpls-linux-docs/ >>>>>> >>>>>> Cheers, >>>>>> Adrian >>>>>> >>>>>>> 2008/4/23 刘磊 : >>>>>>> >>>>>>> Hi all: >>>>>>> I'm a new bie. >>>>>>> And I had some problem in MPLS-Linux. >>>>>>> Does mpls-linux support for add label to normal IP packet? >>>>>>> I'm failed with "Links to examples", because the LER1 doesn't add label to the normal IP packets. >>>>>>> Which function will do that in the source code? >>> _________________________________________________________________ >>> 多个邮箱同步管理，live mail客户端万人抢用中 >>> http://get.live.cn/product/mail.html >>> >> >>> ------------------------------------------------------------------------- >>> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference >>> Don't miss this year's exciting event. There's still time to save $100. >>> Use priority code J8TL2D2. >>> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone >>> _______________________________________________ >>> mpls-linux-devel mailing list >>> mpl...@li... >>> https://lists.sourceforge.net/lists/listinfo/mpls-linux-devel >> >> >> -- >> James R. Leu >> jl...@mi... > > _________________________________________________________________ > Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ > http://get.live.cn/product/photo.html > _________________________________________________________________ 新年换新颜，快来妆扮自己的MSN给心仪的TA一个惊喜！ http://im.live.cn/emoticons/?ID=18 |
