[mpls-linux-general] [mpls-linux-devel] Development MPLS-Linux

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hello James,

I've read in the old message in the list this mail:

>* On Tue, Jun 01, 2004 at 01:03:08AM +0300, Vadim Suraev wrote:
*>* > Hi.
*>* > I'd like to contribute to the Zebra users & developers'
community several software
*>* > modules that I've developed recently:
*>* > RSVP-TE, TE application, TE extensions for OSPF.
*>* > The software has been tested against CISCO.
*>* > If you decide to try it, please read the short manuel at:
*>* > http://www.angelfire.com/theforce/suraev/zebra/MPLS_TE_SW_manuel.txt
*>* > The code is located at:
*>* > http://www.angelfire.com/theforce/suraev/zebra/zebra.tar.gz
*>* > If you have any questions, you are welcome to ask.
*>* > Any request for any help and support is welcome.
*>* >
*>* > Regards,
*>* >  Vadim.

*

The link is actually broken. I think it could be really interesting for me
to have this documentation and I think that maybe you have a copy of that.

Regards

On Fri, Feb 29, 2008 at 3:23 PM, James R. Leu <jl...@mi...> wrote:

> On Fri, Feb 29, 2008 at 01:22:01PM +0100, =?ISO-8859-1?Q?Jes=FAs_Nubiola_
> wrote:
> > Finally I can get access to the repository :)
> >
> > I have created a workspace named oksi. I have downloaded quagga-mpls and
> > look a litle bit the code of rsvpd. I am realized that is the Vadim
> > implementation, isn't it?
>
> Yes most definitely.  He contributed the code a couple years back and
> I am just now getting around to trying to integrate it.  I believe
> all of the files that originated from his source give him credit
> at the top, if not, they should.
>
> > Arrived at this point I'm lost about how can I test it or if I'm doing
> well
> > or not downloading this folder.
> > Can you advice me of some test that can help and contributed the results
> to
> > the project?
>
> At this point all it does is compile, nothing further has been tested.
>
> My first goal is to get the RSVP-TE engine running and sending path
> messages.  This requires VTY command work.
>
> After that processing of path messages will require the te_rdb engine
> to be running.  At first I just want to get it running with just
> shortest path routing constraints (ie no bandwidth or affinity
> considered).
> To do this the te_rdb code needs to be modified to do standard IPv4
> lookups some how, either by building a patricia tree from route
> updates that come from zebra or by issuing nexthop lookups back
> to the main zebra daemon using the ZEBRA_IPV4_NEXTHOP_LOOKUP message.
> I'm leaning toward the latter because I think down the road I will
> want to move all of the CSPF calculations into the zebra daemon, this
> will make TE info dissemination easier and will make the CSPF and TE info
> available to other protocols that choose to use it.
>
> So basically, dig in and start trying to make it work.  I'm
> hoping to finish up some LDP work, once I have LDP at least kind of
> working again, I will switch gears and work on RSVP-TE as well.
>
> > Thank you very much.
> >
> > On Fri, Feb 29, 2008 at 12:07 PM, Jesús Nubiola <oc...@gm...>
> wrote:
> >
> > > I'm not able to access to perforce server during all the morning.
> > >
> > > Is the server down?
> > >
> > >
> > > On Tue, Feb 26, 2008 at 4:02 AM, James R. Leu <jl...@mi...>
> wrote:
> > >
> > > > On Mon, Feb 25, 2008 at 01:33:49PM +0100,
> > > > =?ISO-8859-1?Q?Jes=FAs_Nubiola_ wrote:
> > > > > Hi James,
> > > > >
> > > > > I have been reading your guide to access to your perforce server
>  (
> > > > > http://mpls-linux.sourceforge.net/). Note: the link to the
> developers
> > > > guide
> > > > > in your web is broken :(
> > > >
> > > > Thanks for the notice, being that it was written and host by someone
> > > > else who is no longer helping the project I'll end up removing the
> link.
> > > >
> > > > > As I was saying I think that I've be able to connect to your
> perforce
> > > > > following the instructions on your web but I don't see exactly the
> > > > same you
> > > > > put in your instructions above-named:
> > > >
> > > > You need to create your own workspace, and then modify the view.
> > > > The quagga-rsvpte dir is not what you want, that is an old failed
> > > > rsvpte implementation.  The one you want is in the quagga-mpls tree.
> > > > You will need the entire quagga-mpls directory.
> > > > I'm almost done porting it to quagga-0.99.9.  I haven't done any
> testing
> > > > with it.  It probably doesn't work at all, but I could really use
> some
> > > > help getting it going.
> > > >
> > > > > Under the heading 'Access to my development repository'.  The
> 'view'
> > > > > you will want is:
> > > > >
> > > > >    //depot/quagga/... //<client name>/quagga/...
> > > > >    //depot/quagga-plus/... //<client name>/quagga-plus/...
> > > > >    //depot/quagga-mpls/... //<client name>/quagga-mpls/...
> > > > >
> > > > > The only folder that I see is the last one (quagga-mpls), and
> inside
> > > > of it
> > > > > there is another folder named rsvpd.
> > > > > Is that folder the one that you aimed in the mail before?
> > > > > Could you give me some advices to understand the state of the art
> of
> > > > that
> > > > > code? (examples that I can prove or anything that you think it
> could
> > > > help me
> > > > > to understand the code and let me to improve the integration into
> > > > Quagga).
> > > > >
> > > > > Here is a snapshot of my view of your perforce server:
> > > > >
> http://img96.imageshack.us/my.php?image=screenshotperforcemplsro5.jpg
> > > > >
> > > > > The options I use to connect it are:
> > > > >
> > > > > server: p4.dangermen.com
> > > > > port: 1666
> > > > > Username: perforce (no password)
> > > > > worksace: mplslinux (on click to browse button it appears 4
> options:
> > > > > esemjrpg3, /home/tmp/dep, mmbb97 and mplslinux.  thought that the
> last
> > > > one
> > > > > was the correct one)
> > > > >
> > > > > Thank you very much and sorry for my English again ;)
> > > > >
> > > > > Regards
> > > >
> > > > >
> > > >
> -------------------------------------------------------------------------
> > > > > This SF.net email is sponsored by: Microsoft
> > > > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > > > _______________________________________________
> > > > > mpls-linux-general mailing list
> > > > > mpl...@li...
> > > > > https://lists.sourceforge.net/lists/listinfo/mpls-linux-general
> > > >
> > > >
> > > > --
> > > > James R. Leu
> > > > jl...@mi...
> > > >
> > >
> > >
>
> >
> -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > mpls-linux-devel mailing list
> > mpl...@li...
> > https://lists.sourceforge.net/lists/listinfo/mpls-linux-devel
>
>
> --
> James R. Leu
> jl...@mi...
>