Red Hat Linux
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
You seem to have CSS turned off.
Please don't fill out this field.
Briefly describe the problem (required):
Please provide the ad click URL, if possible:
I had to delete all the pics I attached to the original email. If you email
me at john.a.sutherland@... I can send you some photos of what I
have. Maybe the links below will be enought.
Does anyone know how to connect these to my BNC connector on my DVR?
I have contacted Levtion, this is a discontinued model and they cannot help
much. I could use a video sequencer they said, but all that does is allow
my to watch 4 cameras at once on my screen and/or switch between each camera
every 1-30 seconds depending on how I set it up.
I want to see each video feed separately and input it to my DVR so I can use
motion to monitor like I can with my other IP and CCTV cameras that plug
into my DVR now.
How can I take camera input from the RG6 cable to a BNC connector that will
feed into my DVR? Is it just a physical conversion or is there a box that I
need to put in between to conver the video signal?
Here are some links to the Leviton system:
Thanks for your help!
Sign up for the SourceForge newsletter: