From: fred <tanelorn2@ya...> - 2008-07-23 12:01:45
Just wanted to drop a not to say Thanks!! and to give the
list an update.
I've been able to run each camera alone with very good
results, so I know the cameras are working fine ( I thought
maybe one of the cameras was faulty..) (framerate=12,
640x480 on the orbit) solid as a rock.
(I could go to framerate of 15.. but big video files...)
so I'm testing to see if its a bandwidth issue, I
purchased from ebay an adaptec aua-1420 pcmcia (dual
controller!!) 2 port usb card I'll put in the laptop
and see how that works.
the part that is strange is that it worked on earlier
versions of motion, albeit there were some weird anomolies.
(jerky videos, missing action.. etc..) My card should be
here in a couple of days. I'll report back once I get
it installed and working.
right now, I'm just running with the orbit. (I love
being able to aim the camera from work... :)
Keep up the great work!!
> > Date: Wednesday, July 16, 2008, 7:15 AM
> > Greetings folks,
> > I have a setup where I've got 2 usb cameras. When
> > was running 3.2.9, it was working fairly well.
> > When I upgraded to 22.214.171.124 the cameras will only stay
> > connected till shortly after the first video or second
> > video. then, the watchdog timer realizes the camera
> > hasn't responded, and restarts the thread. when
> > does, the camera says its busy..
> > my config files, and logs are here.
> > http://www.fredsnet.org/motion.txt
> > http://www.fredsnet.org/thread1.txt
> > http://www.fredsnet.org/thread2.txt
> > http://www.fredsnet.org/messages.txt
> > any help would be appreciated.
> > Thanks
> > Fred
Get latest updates about Open Source Projects, Conferences and News.