From: Mitch M. <mi...@bu...> - 2006-03-23 00:12:09
|
Hi Everyone, I've got a slight problem with the capture card we're using. The following is the line from my /etc/modprobe.conf options bttv card=118,118,118,118,118,118,118,118 tuner=4,4,4,4,4,4,4,4 I can't find much information about the card that I'm using but in short it has 8 seperate composite inputs connected through what looks like a parallel adapter. The pcicard has 8 conexant chips on the single pcb. The problem being when I do a modprobe it takes a few minutes to complete and when I do a dmesg its hanging on this line bttv#: registered device video0 each time. We've tried the card as being 72, without the notuner option as well as the 118 with the notuner and without. What I'm trying to figure out is when we first start motion one of the cameras doesn't initialise properly, but the other does. When I use say xawtv to look at what the device is doing, then it starts working in both. If anyone has any idea about this card or any information about what driver I should be using it would be greatly appreciated. Below is a dmesg: bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 18 (level, low) -> IRQ 18 bttv0: Bt878 (rev 17) at 0000:02:08.0, irq: 18, latency: 32, mmio: 0xdf000000 bttv0: using: LMLBT4 [card=118,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv0: using tuner=4 bttv0: registered device video0 bttv0: registered device vbi0 bttv: Bt8xx card found (1). ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 19 bttv1: Bt878 (rev 17) at 0000:02:09.0, irq: 19, latency: 32, mmio: 0xde000000 bttv1: using: LMLBT4 [card=118,insmod option] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv1: using tuner=4 bttv1: registered device video1 bttv1: registered device vbi1 bttv: Bt8xx card found (2). ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 16 (level, low) -> IRQ 16 bttv2: Bt878 (rev 17) at 0000:02:0a.0, irq: 16, latency: 32, mmio: 0xdd000000 bttv2: using: LMLBT4 [card=118,insmod option] bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv2: using tuner=4 bttv2: registered device video2 bttv2: registered device vbi2 bttv: Bt8xx card found (3). ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv3: Bt878 (rev 17) at 0000:02:0b.0, irq: 17, latency: 32, mmio: 0xdc000000 bttv3: using: LMLBT4 [card=118,insmod option] bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv3: using tuner=4 bttv3: registered device video3 bttv3: registered device vbi3 bttv: Bt8xx card found (4). ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 18 (level, low) -> IRQ 18 bttv4: Bt878 (rev 17) at 0000:02:0c.0, irq: 18, latency: 32, mmio: 0xdb000000 bttv4: using: LMLBT4 [card=118,insmod option] bttv4: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv4: using tuner=4 bttv4: registered device video4 bttv4: registered device vbi4 bttv: Bt8xx card found (5). ACPI: PCI interrupt 0000:02:0d.0[A] -> GSI 19 (level, low) -> IRQ 19 bttv5: Bt878 (rev 17) at 0000:02:0d.0, irq: 19, latency: 32, mmio: 0xda000000 bttv5: using: LMLBT4 [card=118,insmod option] bttv5: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv5: using tuner=4 bttv5: registered device video5 bttv5: registered device vbi5 bttv: Bt8xx card found (6). ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16 bttv6: Bt878 (rev 17) at 0000:02:0e.0, irq: 16, latency: 32, mmio: 0xd9000000 bttv6: using: LMLBT4 [card=118,insmod option] bttv6: gpio: en=00000000, out=00000000 in=00ffffff [init] LMLBT4x init bttv6: using tuner=4 bttv6: registered device video6 bttv6: registered device vbi6 bttv: Bt8xx card found (7). ACPI: PCI interrupt 0000:02:0f.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv7: Bt878 (rev 17) at 0000:02:0f.0, irq: 17, latency: 32, mmio: 0xd8000000 bttv7: using: LMLBT4 [card=118,insmod option] bttv7: gpio: en=00000000, out=00000000 in=00fffff1 [init] LMLBT4x init bttv7: using tuner=4 bttv7: registered device video7 bttv7: registered device vbi7 Thanking you, Mitch |