[Motion-user] [1] ioctl(VIDIOCGMBUF) - Error device does not support memory map

[<pin...@co...>]

Hi,

I am not sure if if the hardware and software that I am using will work.  From dmesg it looks like my ivtv driver supports MPEG, YUV and VBI.  Can someone please help me?  

Thanks,
Randall

hardware:
    wintv-250 Haupauge card with svideo in
    video camera with svideo out

software:
    fedora core 4 2.6.13-1.1526_FC4
    ivtv version 0.4.0
    motion 3.2.4
    Video4linux loopback driver v0.95
        Loopback 0 registered, input: video1,output: video2

# motion -s
[0] Processing thread 0 - config file /usr/local/etc/motion.conf
[0] Motion running in setup mode.
[0] Thread device: /dev/video0 input 5
[0] Thread is from /usr/local/etc/motion.conf
[0] Waiting for threads to finish, pid: 3090
[1] Thread started
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Capture error calling vid_start
[1] Thread finishing...


[root@wildcat-linux camstream]# dmesg |grep -i yuv
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)


vtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.0 (tagged release) loading
ivtv:  Linux version: 2.6.13-1.1526_FC4 686 REGPARM 4KSTACKS gcc-4.0
ivtv:  In case of problems please include the debug info
ivtv:  between the START INIT IVTV and END INIT IVTV lines when
ivtv:  mailing the ivtv-devel mailinglist.
ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
tveeprom: ivtv version
tveeprom: Hauppauge: model = 32062, rev = B185, serial# = 7368710
tveeprom: tuner = TCL 2002N 6A (idx = 85, type = 50)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio processor = MSP3445 (type = c)
tveeprom: decoder processor = SAA7115 (type = 13)
ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
tuner: type set to 39 (LG NTSC (newer TAPC series)) by insmod option
tuner: The type=<n> insmod option will go away soon.
tuner: Please use the tuner=<n> option provided by
tuner: tv aard core driver (bttv, saa7134, ...) instead.
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
msp34xx: ivtv version
msp34xx: init: chip=MSP3445G-B8, has NICAM support, simple (D) mode, simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Oct 24 2005 19:18:57
ivtv0: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40]
ivtv0: loading /lib/modules/ivtv-fw-enc.bin
ivtv0: Encoder revision: 0x02040011
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner: type already set to 39, ignoring request for 50
ivtv0: Initialized WinTV PVR 250, card #0
ivtv:  ====================  END INIT IVTV  ====================