Re: [Motion-user] Log Errors

[Harlan D. <hda...@gm...>]

Thank you for replying, here is the output.


ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size 320x240 -framerate 5 -i
pipe:0 -vcodec libx264 -preset ultrafast -f mp4 test.mp4
ffmpeg version 4.1.3 Copyright (c) 2000-2019 the FFmpeg developers
  built with gcc 9 (GCC)
  configuration: --prefix=/usr --bindir=/usr/bin
--datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg
--incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man
--arch=x86_64 --optflags='-O2 -g -pipe -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions
-fstack-protector-strong -grecord-gcc-switches
-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1
-specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic
-fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection'
--extra-ldflags='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now
-specs=/usr/lib/rpm/redhat/redhat-hardened-ld ' --extra-cflags=' '
--enable-libopencore-amrnb --enable-libopencore-amrwb
--enable-libvo-amrwbenc --enable-version3 --enable-bzlib
--disable-crystalhd --enable-fontconfig --enable-frei0r --enable-gcrypt
--enable-gnutls --enable-ladspa --enable-libaom --enable-libass
--enable-libbluray --enable-libcdio --enable-libdrm --enable-indev=jack
--enable-libfreetype --enable-libfribidi --enable-libgsm
--enable-libmp3lame --enable-nvenc --enable-openal --enable-opencl
--enable-opengl --enable-libopenjpeg --enable-libopus --enable-libpulse
--enable-librsvg --enable-libsoxr --enable-libspeex --enable-libssh
--enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvidstab
--enable-libvmaf --enable-libvpx --enable-libx264 --enable-libx265
--enable-libxvid --enable-libzvbi --enable-avfilter --enable-avresample
--enable-postproc --enable-pthreads --disable-static --enable-shared
--enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64
--enable-libmfx --enable-runtime-cpudetect
  libavutil      56. 22.100 / 56. 22.100
  libavcodec     58. 35.100 / 58. 35.100
  libavformat    58. 20.100 / 58. 20.100
  libavdevice    58.  5.100 / 58.  5.100
  libavfilter     7. 40.101 /  7. 40.101
  libavresample   4.  0.  0 /  4.  0.  0
  libswscale      5.  3.100 /  5.  3.100
  libswresample   3.  3.100 /  3.  3.100
  libpostproc    55.  3.100 / 55.  3.100

On Mon, Jun 10, 2019 at 10:42 AM tosiara <to...@gm...> wrote:

> "Does not work" does not contain enough information, do you agree?
>
> Try to run the command in your console:
>
> ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size 320x240 -framerate
> 5 -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 test.mp4
>
> This should hang waiting for video on stdin. Copy the output and kill
> with CTRL+C. Send the output
>
> On Mon, Jun 10, 2019 at 5:15 PM Harlan Daneker <hda...@gm...> wrote:
> >
> > motion 4.1.1+git20180626-43b9c2b
> >
> >
> > This does not work:
> > extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h
> -framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 %f.mp4
> >
> > I have tried as many of the video formats as I was able to find and none
> of them work.
> >
> > So I just omitted "rawvideo -pix_fmt" and it works.
> > extpipe ffmpeg -y -video_size %wx%h -framerate %fps -i pipe:0 -vcodec
> libx264 -preset ultrafast -f mp4 %f.mp4
> >
> > But I constantly get these errors in motion.log:
> > Motion.log
> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:56] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:57] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:58] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:59] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > [1:ml1] [ERR] [EVT] Above message repeats 12 times
> > [1:ml1] [ERR] [EVT] [Jun 09 21:33:03] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > [1:ml1] [ERR] [EVT] Above message repeats 26 times
> > [1:ml1] [ERR] [EVT] [Jun 09 21:33:04] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> > [1:ml1] [ERR] [EVT] [Jun 09 21:33:05] event_extpipe_put: Error writing
> in pipe , state error 1: Broken pipe
> > _______________________________________________
> > Motion-user mailing list
> > Mot...@li...
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
> _______________________________________________
> Motion-user mailing list
> Mot...@li...
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>