Re: [Motion-user] RTSP stream and CPU utilization

[David P. <da...@de...>]

The resolution of the MJPEG ones are all 640x480.  The RTSP one is 720p.

I have /framerate/ set to 15 in motion.conf.  The individual camera 
config files do not have that setting.

David

On 11/23/18 10:54 AM, Colin Law wrote:
> On Fri, 23 Nov 2018 at 16:53, Colin Law <cl...@gm...> wrote:
>> On Fri, 23 Nov 2018 at 16:43, David Powell <da...@de...> wrote:
>>> I have 3 IP cameras configured in Motion running on a Raspberry Pi (Ubuntu).  These cameras all use MJPEG streams and the CPU utilization on the Pi hovers around 50%.
>>>
>>> I added another camera which doesn't support MJPEG, but does support RTSP.  Adding this one RTSP camera ran the CPU utilization up to around 200% (I believe this Pi has a quad-core CPU).  Is this typical for RTSP?  Is there any way to reduce the load for this protocol?  I want to add several more cameras but cheap wireless outdoor IP cameras that support MJPEG seem to be hard to come by nowadays.
>> What is the resolution of the mjpeg cameras and what is the rtsp one?
> Also what is frame rate of both?
>
>> Colin
>>
>>> David
>>>
>>> _______________________________________________
>>> Motion-user mailing list
>>> Mot...@li...
>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>> https://motion-project.github.io/
>>>
>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
> _______________________________________________
> Motion-user mailing list
> Mot...@li...
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user