Re: [Motion-user] RTSP question

[<giu...@li...>]

Colin,

It works now! Thanks! But the registration appears as in the attached screenshot. It's all gray.
First, however, he could not even regist. We took one more step!
Thank you!

> Il 27 marzo 2018 alle 10.57 Colin Law <cl...@gm...> ha scritto:
> 
>     On 27 March 2018 at 09:51, giustinoromano--- via Motion-user <mot...@li... mailto:mot...@li... > wrote:
>     ...
> 
>         > > 
> >         One of the three cameras, of which I spoke to you earlier, broke down and replaced it. This new camera is onvif and uses this type of RTSP protocol.
> >         The correct url is of this kind:
> > 
> >         rtsp: // admin:http://admin@192.168.1.20/onvif1
> > 
> >         I tried this address on VLC and the camera shows. However, by inserting this in "netcam_url" on Motion, motion detection is not recorded!
> > 
> >         Thank you very much for your response, it was very kind of you.
> > 
> >     >     Firstly you don't want all those spaces in the url, and I have found that it works if you use netcam_userpass for specifying the credentials, so something like
>     netcam_url rtsp:// 192.168.1.20/onvif1 http://admin@192.168.1.20/onvif1
>     netcam_userpass admin:admin
> 
>     Colin
> 
>     ------------------------------------------------------------------------------
>     Check out the vibrant tech community on one of the world's most
>     engaging tech sites, Slashdot.org! http://sdm.link/slashdot_______________________________________________
>     Motion-user mailing list
>     Mot...@li...
>     https://lists.sourceforge.net/lists/listinfo/motion-user
>     https://motion-project.github.io/
> 
>     Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>