[Motion-user] Enabling tracking stops recording

[Daniel A. <da...@ag...>]

Hello,

I recently added a pan servo to one of the cameras in my working
motion setup. The tracking seems to work well, watching it respond to
movement in the live stream, but it has now stopped recording, or
logging events. The other camera still records video, images and logs
events to mysql. They have identical configurations other than the
tracking section and video device. The web interface still reports
"Thread 2 Detection status ACTIVE". Is this behavior normal?


############################################################
# Tracking (Pan/Tilt)
############################################################

# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc,
4=generic, 5=uvcvideo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 1

# Enable auto tracking (default: off)
track_auto on

# Serial port of motor (default: none)
track_port /dev/ttyUSB0

# Motor number for x-axis (default: 0)
track_motorx 1