Re: [MooseFS-Users] Bananapi as Chunkserver

[Aleksander W. <ale...@mo...>]

Hi!
Can you tell as some details about your configuration like:

- MooseFS version?
- Ping time from chunkserver to mfsmaster?
- Chunkserver(bananaPI) NIC speed?

Can you set up some ftp or SAMBA server on chunkserver and tell as what
transfer speed you can achieve?

Best regards
Aleksander Wieliczko
Technical Support Engineer
MooseFS.com <moosefs.com>

On 10/10/2015 11:40 AM, Wolfgang wrote:
> Hi List!
>
> I'm currently experimenting with 8x Banabapi [1] (similar to Raspberry 
> Pi Computers) as my Chunkservers
> and a virtual Ubuntu as Master.
> Advantage of Bananapi to the better known Raspberry Pi is 1Gbit NIC and 
> the direct SATA support for 2.5'' HDD's (Sata and Power plug) [2]
> I'm using it in my private Gbit LAN at home.
> Performance for sequental data stream (dd if=/dev/zero ...) and goal=1 
> is good - but performance for goal = 2 is just abt. 20MB/s and with 
> small files coming from attic backup [3] is poor ~ 2MB/s)
> Write performance (dd) direct on one of my nodes to the SATA disc is 
> abt. 50MB/s
>
> Is anyone in the list also fiddeling around with this type of setup?
> Is there any configuration which I can do to get more performance? (more 
> nodes?)
>
> Thank you.
>
> Greetings
> Wolfgang
>
>
> [1] ... 
> http://www.pollin.de/shop/dt/MTA4NzkyOTk-/Bausaetze_Module/Entwicklerboards/Banana_Pi_Dual_Core_1_GB_DDR3_SATA_G_LAN.html
> [2] ... 
> http://www.pollin.de/shop/dt/NzI3NzkyOTk-/Bausaetze_Module/Entwicklerboards/Banana_Pi_SATA_Kabel.html
> [3] ... https://attic-backup.org/
>
> ------------------------------------------------------------------------------
> _________________________________________
> moosefs-users mailing list
> moo...@li...
> https://lists.sourceforge.net/lists/listinfo/moosefs-users