[Module::Build] Re: Smoke [5.9.4] 27706 FAIL(Xc) openbsd 3.8 (i386/1 cpu)

[Randy W. S. <ml...@th...>]

st...@mc... wrote:
> Automated smoke report for 5.9.4 patch 27706
> mccoy.peters.homeunix.org: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) (548 MHz) (i386/1 cpu)
>     on        openbsd - 3.8
>     using     cc version 3.3.5 (propolice)
>     smoketime 5 hours 32 minutes (average 1 hour 23 minutes)
> 
> Summary: FAIL(Xc)
> 
> O = OK  F = Failure(s), extended report at the bottom
> X = Failure(s) under TEST but not under harness
> ? = still running or test results not (yet) available
> Build failures during:       - = unknown or N/A
> c = Configure, m = make, M = make (after miniperl), t = make test-prep
> 
>    27706     Configuration (common) none
> ----------- ---------------------------------------------------------
> O X c -     
> c - - -     -Duse64bitint
> | | | +----- PERLIO = perlio -DDEBUGGING
> | | +------- PERLIO = stdio  -DDEBUGGING
> | +--------- PERLIO = perlio
> +----------- PERLIO = stdio
> 
> 
> Failures: (common-args) none
> [perlio] 
> Inconsistent test results (between TEST and harness):
>     ../lib/Module/Build/t/extend.t..........FAILED--expected 53 tests, saw 37
>     ../lib/Module/Build/t/basic.t...........FAILED--expected 55 tests, saw 0
>     ../lib/Module/Build/t/compat.t..........FAILED--expected 60 tests, saw 1

I'm not sure what's happening here. On FreeBSD, I get success on both 
`make test` and `./TEST`. It's also passing on the other BSDs: NetBSD & 
Darwin. And it looks like it passed on a previous build on this smoke 
box, with no changes made to M::B since the PASS.

Is this a real failure?

Randy.