From: Karl a. T. P. <kar...@ea...> - 2003-03-20 03:03:25
|
=2D----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tuesday 18 March 2003 03:16 am, Ronald Bultje wrote: > Hey Karl, > > On Tue, 2003-03-18 at 02:54, Karl and Tanya Pizzolatto wrote: > > I didn't find anything. What I wrote down follows below. Keep in mind > > this report has gone from screen to eyes to fingers to paper to eyes to > > fingers to screen! (well, there's keyboard and computer between fingers > > and screen, but you get the idea). If you can tell me how to trap this > > (or where to look for it), I will be very grateful. Otherwise, I hope > > this helps you with the driver. > > [..] > > > Kernel BUG at sched.c:564! ins: 0 del: 0 ae: 0 td1=3D0.009 td2=3D0.0040 > > Oi, an oops. Could you try two things? > > 1) try with a vanilla 2.4.20 kernel. > 2) try loading modules in the same order on startup (so their memory > location between two subsequent boots is the same). After that, redo the > same thing, and on the next boot, run "ksymoops", paste the output of > the previous oops (which you need to write down again, sorry...) into > it, press enter a few times and wait for output. That should give a > kernel backtrace. > > Ronald Well, #2 is easy; I just ran ksymoops crashlog > oops.out. Since I initially tried to run lavrec after a "clean" boot, everything shou= ld=20 be in the same place it was before. Hopefully, everything is in the same place; it does look like a lot of vide= o=20 stuff is showing up when I run ksymoops, so that seems to be consistent. =46or the record: $ ksymoops zorancrash > oops.out $ $ $ $ I have attached oops.out. Here's something that may be interesting: I am using i2c-2.7.0 because I'm= =20 running lm_sensors on this machine. I noticed i2c-algo-bit and i2c-core in= =20 oops.out; both these come from the i2c package and not from the kernel. This kernel has 2 sets of patches: =20 Crypto: loop-jari-2.4.20.0.patch and=20 Andrew Morton's ext3 patches: I think these are for using SCSI RAID with=20 ext3. This weekend, I will build a 2.4.20 kernel with no patches and no i2c-2.7.0= =2E =20 Then rebuild driver-zoran, reboot with only the modules I really need loade= d,=20 then try to reproduce the crash and send the output of ksymoops. Probably not relavant, but note I'm not using the kernel OSS stuff (never=20 have). =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE+eS+OTHYRdwouzJMRAgSpAJ9nghybN46633LOdokD/a759DqNGQCgoHCB mB5ppnHbjtg2LiBa9lcu+ic=3D =3Dr0hd =2D----END PGP SIGNATURE----- |