From: Johnny H. <bs...@ho...> - 2011-08-30 16:59:44
|
Hi, just got mh up and running. out of the box, using any of the sample web interfaces, i can turn on/off my 2 lights, but no dimming functions are accepted. the devices seem to accept the commands (no errors), but nothing happens, if for example i select 30%, -40 or 5%, the light just goes to 100%. not sure what i am doing wrong. here's what i have setup and log outputs, any help appreciated. Johnny Devices: 2476D - 600 watt SwitchLinc dimmers 2413U - PowerLinc Modem 2443 - Access Points insteon.mht: IPLD, 13.5D.62, Bedroom_1, Bedrooms|Br_1|All_Lights, PLM # v4.2 switchlink dimmer IPLD, 13.5D.75, Bedroom_2, Bedrooms|Br_2|All_Lights, PLM # v4.2 switchlink dimmer Output of executing dimming command: 30/08/2011 12:58:42 PM [Insteon_Device] $Bedroom_2::set(30%, Voice_Cmd=HASH(0xc85e80)) 30/08/2011 12:58:42 PM menu_run: g=mh m=Insteon i=1 s=5 => action: Bedroom 2 '30%' 30/08/2011 12:58:42 PM Running: Bedroom 2 30% 30/08/2011 12:58:42 PM [Insteon_PLM] Parsing serial data: 0262135d750f11ff06 30/08/2011 12:58:42 PM [Insteon_Device] $Bedroom_2::set(30%, Voice_Cmd=HASH(0xc85e80)) 30/08/2011 12:58:42 PM [Insteon_PLM] Parsing serial data: 0262135d750f11ff060250135d751485882b11ff 30/08/2011 12:58:42 PM [Insteon_PLM] Processing message for $Bedroom_2 30/08/2011 12:58:42 PM [Insteon_Device] received command/state acknowledge from $Bedroom_2: on and data: ff 30/08/2011 12:58:43 PM [Insteon_PLM] Parsing serial data: 0250135d751485882b11ff 30/08/2011 12:58:43 PM [Insteon_PLM] Processing message for $Bedroom_2 30/08/2011 12:58:43 PM [Insteon_Device] received command/state acknowledge from $Bedroom_2: on and data: ff 30/08/2011 12:59:00 PM: Saving object states ... Completed. |