From: Emmanuel G. <mis...@re...> - 2009-02-21 22:17:32
|
Hi Charles, Agree but my problem today is after turning on debug on W800 I don't see see any packets regarding an unknown sensor or else in mh logs ? Thanks, Emmanuel On Sat, 2009-02-21 at 15:30 -0500, Charles Sullivan wrote: > On Sat, 21 Feb 2009 19:36:46 +0100 > Emmanuel Grout <mis...@re...> wrote: > > > i The list, > > > > I would like to add remote temperature sensor (like the THGR228N > > from Oregon) to MH. > > > > This is what I can see from the RFXcom in 32bit mode : > > E414162F RFXsensor[58388]T RFXSensor addr:E414 ID:58388 > > Temp:22.125C > > > > However I haven't been able to see any data with the W800 in > > debug > > mode ? > > > > I will dig into this, but can someone guide me to start ? > > > > Thanks and good day ! > > Emmanuel > > Emmanuel, > The RFXCOM 433.92MHz firmware is specially programmed to recognize > Oregon signals. I suspect the W800RF32AE is not (but have not > personally verified this). > > The THGR228N is a temperature & humidity sensor. The RFXCOM in 32 bit > mode can only report the temperature. To get both temperature and > humidity (and other info like channel number and low-battery flag) > requires operating the RFXCOM in variable length packet mode. > > Regards, > Charles Sullivan > > > ------------------------------------------------------------------------------ > Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA > -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise > -Strategies to boost innovation and cut costs with open source participation > -Receive a $600 discount off the registration fee with the source code: SFAD > http://p.sf.net/sfu/XcvMzF8H > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > |