From: Gregg L. <gr...@li...> - 2005-03-26 12:29:34
|
Alan Womack wrote: >Ok I'm confused now... > >My CM11A seems to be quite weak? Way less than 3volts according to a loaned >Elk signal meter. Is this normal? > >I have an outlet down the wall a few feet that will show the same Cm11a as >being well over 3 volts, but the outlet the CM11a feeds it won't. > >Most of my signal around the house is less than 1 v and more than .1v. I have >found two more signal suckers to be filtered: > > Belkin UPS > Antec PC powersupply > >After unpluggin the PC my troublesome kitchen light works fine, but I still get >very log signal to certain outlets around the house. > >Thoughts on strength. I will try a relocation of the CM11a maybe tonight also. > > Alan, Are the higher signal outlets located on the same "leg" of your house power as your CM11? Even w/ a repeater (you do have one of these--right?), I don't get quite as good a signal on the outlets on the other side of my house power. If you have one of the outlet to breaker identification tools (you plug in a source into an outlet and then scan your breakers to locate which breaker switches the outlet), it might be useful to know which breaker terminates which "problem" outlets. Gregg |