From: Nick M. <gn...@op...> - 2004-04-17 10:59:23
|
Hi Jon, If you are powering the anolgue board from the previous board, then J3 doesn't have any postive power on it, so you will have to take the power form the same feed that is supplying your digital board, assuming this is less than 30 volts :-). Nick Maddock. -----Original Message----- From: mis...@li... [mailto:mis...@li...]On Behalf Of Jon Scott Sent: Saturday, 17 April 2004 6:28 To: mis...@li... Subject: [misterhouse-users] Weeder Analog Board Hey Everyone, I've been trying to hook up a LM34 Temperature sensor to my analog weeder board. From what I understand the sensor needs 5 - 30vdc, but I can't figure out how it's supposed to be hooked up. This board is receiving power from the board before it (digital board). Do I use a seperate power source? Do I attach the LM34's power wire to the input on my digital board's power source, then attach the ground wire to the analog board common terminal? I probably have this all messed up, can anyone help me out by telling me how I should wire this thing? Thanks, Jon Scott ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click ________________________________________________________ To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 |