From: David N. <jud...@ad...> - 2004-01-30 11:50:39
|
After installing cygwin, copy the source tar file http://mywebpages.comcast.net/ncherry/common/cpuxad/xalib-0.48_bin.tgz to /usr/local/src. This directory is located under the cygwin install directory. Open a cygwin shell window and enter the following commands: cd /usr/local/src tar -xvzf xalib-0.48_bin.tgz cd xalib-0.48 make make install cpuxad.exe -d -a cpuxad.access -f log -L LCK..ocelot --com /dev/com1 Now, add the following line to your ini parameter file and restart misterhouse: ncpuxa_port=localhost:3000 I haven't done this in a while, so I probably left out some steps. Give it a try and let us know how it goes. David ----- Original Message ----- From: "Salil Athalye" <sat...@ro...> To: <mis...@li...> Sent: Friday, January 23, 2004 4:03 PM Subject: [misterhouse-users] Need help getting xalib to compile under cygwin > Hello all, > I run an Applied Digital Ocelot on Windows XP and would like to use the > cpuxad daemon. I was told that I should install cygwin and then compile > xalib-48. > Does anyone have instructions on how to do this, and then set up Misterhouse > to use cpuxad? > > Sal > > > > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > |