From: Brian & B. R. <rta...@ma...> - 2002-09-20 01:38:41
|
I'm confused. I'm also using Windows (there may be a correlation here...) I run: mh test.pl I get a command-line type window that shows any commands happening. Pressing F1 or any other F-key has no effect. What am I missing? At 07:38 PM 09/19/2002 -0500, you wrote: >> I assume this assumes you don't run mh in the background on the console? >> >> >> > If you're running the Windows version, you can simply hit >> F1 in the main >> >> > window. F3 will exit, BTW. >> >> >> This should work ok on linux also, if you have the Term::ReadKey >> >> installed. > >Correct. > > > > >------------------------------------------------------- >This sf.net email is sponsored by:ThinkGeek >Welcome to geek heaven. >http://thinkgeek.com/sf >________________________________________________________ >To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > > --------------------------------------------------------------------------- Brian & Becky Rosenthal Rosenthal Tandems Rogers, MN 763.428.5536 www.winternet.com/~rtandems |