From: Bob Grieb <rlgrieb@ve...> - 2006-12-31 14:45:34
I have some minila items that I don't need and
am offering for sale:
1) Complete, assembled minila board with input connectors installed
CPLD has been programmed and I have captured some data,
but unit has not been thoroughly tested. I think it's working fine,
but it was hand-soldered and I will not offer any warranty.
You'll have to supply your own power supply and input cables.
I only have one of these.
2) Complete, assembled minila-inspired board that also contains
USB adapter circuit. Jumpers are used to select which interface
is used. CPLD has been programmed, and I will test with a few
captures. There is one pin on the FTDI chip that needs to
be bent up and soldered to a 30-guage wire, and several small
jumper wires are needed on the board to make it work properly.
These units are hand-soldered and I will not offer any warranty.
I will test them before shipping to see that they seem to be
working OK. No power supply or input cables are provided.
I have one extra unit of these already built, and parts for two more.
Price: $125 for assembled unit or $100 for all of the parts in
Please e-mail me if you are interested.
Also, if anyone is interested, I would be willing to share the pc
that I did which combines the minila with the USB on one bd, slightly
larger than minila itself.
Bob Grieb (rlgrieb@...)
Get latest updates about Open Source Projects, Conferences and News.