Screenshot instructions:
Windows
Mac
Red Hat Linux
Ubuntu
Click URL instructions:
Rightclick on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
From: Gyorgy SZEIDL <Gyorgy.SZEIDL@un...>  20041015 12:40:55

dear miktex users, you shall find a very short latex document below. if you read or preview it you shall see what problem i face with. i badly need your help. % \documentclass[12pt,a4paper,reqno]{amsart}% \usepackage{pstricks,pstnode} \newcommand{\dotproduct}[2]{\raisebox{4mm} {\makebox[#1mm][c]{} \rule[0.25em]{0.35pt}{1.75mm}% \rule[0.25em]{#2mm}{0.35pt} \hspace{1.5mm}$\cdot$\hspace{1.5mm} \rule[0.25em]{#2mm}{0.35pt}% \rule[0.25em]{0.35pt}{1.75mm} }} \begin{document} \noindent dear miktex users,\\[2mm] i need help. i write lecture notes on tensor algebra and analysis. contraction between two base vectors is denoted in the way shown here: \begin{gather*} a^{kl}_{\;\;mn}\,\mathbf{g}_k \circ \mathbf{g}_l \circ \mathbf{g}^m \circ \mathbf{g}^n\\ \dotproduct{8.00}{9.5} \end{gather*} However this solution has a disadvantage: one has two know the appropriate values for the parameters \#1 and \#2 before one applies the command. A much better solution can be achieved if we chose the packages \emph{pstricks} and \emph{pstnode}. the solution presented here works perfectly under tetex (linux). however it does not work properly under miktex and texlive. (i installed texlive so that i can check if the command mput works properly or not). The middle of the horizontal line is cleaned, however the dot created by thev command cdot is put to the end of the equation instead of being put into the middle of the horizontal line: \begin{equation*} a^{kl}_{\;\;mn}\,\Rnode{N1}{\mathbf{g}}_k \circ \mathbf{g}_l \circ \mathbf{g}^m \circ \Rnode{N2}{\mathbf{g}}^n \ncbar[linewidth=0.6pt,arm=5pt,nodesep=3pt,angle=90]{N1}{N2}% \mput*{\cdot} \end{equation*} \vspace{3mm} \noindent any help, idea, advice are welcome and are highly appreciated. \end{document} % thank you in advance. g. szeidl 
From: Gyorgy SZEIDL <Gyorgy.SZEIDL@un...>  20060221 10:39:43

dear list member: i have wanted to update my miktex installation this morning. i always use a local repository (d:\miktex24) for downloading the files. i have got the following error message:  Error: The file ftp://ftp.rrze.unierlangen.de/pub/tex/ctan/systems/win32/miktex/tm/packages= /exceltex.cab cannot be downloaded for the following reason: The system cannot find the file specified.  what have i done wrong? best regards g. szeidl =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Dr. habil Gyorgy SZEIDL Full Professor Department of Mechanics University of Miskolc 3515 MiskolcEgyetmev=E1ros Hungary Email: Gyorgy.SZEIDL@... Phone (office): +36 46 565 111 ext. 1892 http://www.mech.unimiskolc.hu/staff/lecturers/G_Szeidl.html =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 
From: Corentin Fontaine <corentin.fontaine@gm...>  20060221 10:53:13
Attachments:
Message as HTML

You've done nothing wrong : the file cannot be downloaded because your computer cannot find it on the specified server ! Try another mirror. cheers, Corentin On 07/02/06, Gyorgy SZEIDL <Gyorgy.SZEIDL@...> wrote: > > dear list member: > > i have wanted to update my miktex installation > this morning. i always use a local repository > (d:\miktex24) for downloading the files. > > i have got the following error message: > >  > > Error: The file > > > ftp://ftp.rrze.unierlangen.de/pub/tex/ctan/systems/win32/miktex/tm/packa= ges/exceltex.cab > > cannot be downloaded for the following reason: > > The system cannot find the file specified. > >  > > what have i done wrong? > best regards > g. szeidl > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > Dr. habil Gyorgy SZEIDL > Full Professor > Department of Mechanics > University of Miskolc > 3515 MiskolcEgyetmev=E1ros > Hungary > Email: Gyorgy.SZEIDL@... > Phone (office): +36 46 565 111 ext. 1892 > http://www.mech.unimiskolc.hu/staff/lecturers/G_Szeidl.html > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > > >  > This SF.net email is sponsored by: Splunk Inc. Do you grep through log > files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://sel.asus.falkag.net/sel?cmdlnk&kid=103432&bid#0486&dat=121642 > _______________________________________________ > MiKTeXUsers mailing list > MiKTeXUsers@... > https://lists.sourceforge.net/lists/listinfo/miktexusers > 
From: Gyorgy SZEIDL <Gyorgy.SZEIDL@un...>  20061017 16:06:08

dear list members: after installing the latest update (Date: 10/15/2006) yap does not work properly (it does not work at all). i use miktex25 with winedt (Build: 20060905, v.5.5). after getting through the usual process i tried the direct search command but it had not worked: (a) yap opened the very first page of the document however the menu commands were not available. (b) i closed everything refreshed the file name database and the format files. (in all probability this was unnecessary.) (c) i restarted winedt, texified my document. this time yap did opened however it got frozen. when i pressed crtl+alt+down it turned out the yap was started twice. i do not think the problem i am reporting has anything to do with winedt. i badly need your help. thank you in advance. best regards g. szeidl  Prof. Dr. habil. Gy=F6rgy SZEIDL Depatrtment of Mechanics University of Miskolc 3515 MiskolcEgyetemv=E1ros Hungary Phone: 3646565111 ext. 1892 URL: http://www.mech.unimiskolc.hu/staff/lecturers/G_Szeidl.html  
From: Ulrike Fischer <list@ni...>  20061018 07:40:23

am Dienstag, 17. Oktober 2006 um 18:05 schrieb Gyorgy SZEIDL: > dear list members: > after installing the latest update > (Date: 10/15/2006) > yap does not work properly (it does not work > at all). Do you have problems with all documents or only with some? What happens with a simple document like this: \documentclass{minimal} \begin{document} test \end{document} Can you open YAP from the start menu and open a standard document e.g. a documentation of package?  Mit freundlichen Grüßen Ulrike Fischer mailto:list@... 
From: Pierre BACH <pierre.bach@bl...>  20041016 13:24:23

Dear Sir, I try your file and i have no problems if taking in account that the dvi viewer YAP never show all the pstricks correctly. You need only to make dvips and look on the ps file with gsview or do ps>pdf and all is ok in the pdf file (but not with dvi>pdf). With the hope that will help you. Best regard's Pierre Bach 
From: Pierre BACH <pierre.bach@bl...>  20041016 13:03:18

Dear Sir, I try your file and i have no problems if taking in account that the = dvi viewer YAP never show all the pstricks correctly. You need only to make dvips and look on the ps file with gsview or do ps>pdf and all is ok = in the pdf file (but not with dvi>pdf). With the hope that will help you. Best regard's Pierre Bach Message d'origine De=A0: miktexusersadmin@... [mailto:miktexusersadmin@...] De la part de Gyorgy SZEIDL Envoy=E9=A0: vendredi, 15. octobre 2004 14:41 =C0=A0: miktexusers@... Cc=A0: mechab@... Objet=A0: [MiKTeX] a problem in the packages pstricks and pstnode dear miktex users, you shall find a very short latex document below. if you read or preview it you shall see what problem i face with. i badly need your help. % \documentclass[12pt,a4paper,reqno]{amsart}% \usepackage{pstricks,pstnode} \newcommand{\dotproduct}[2]{\raisebox{4mm} {\makebox[#1mm][c]{} \rule[0.25em]{0.35pt}{1.75mm}% \rule[0.25em]{#2mm}{0.35pt} \hspace{1.5mm}$\cdot$\hspace{1.5mm} \rule[0.25em]{#2mm}{0.35pt}% \rule[0.25em]{0.35pt}{1.75mm} }} \begin{document} \noindent dear miktex users,\\[2mm] i need help. i write lecture notes on tensor algebra and analysis. contraction between two base vectors is denoted in the way shown here: \begin{gather*} a^{kl}_{\;\;mn}\,\mathbf{g}_k \circ \mathbf{g}_l \circ \mathbf{g}^m \circ \mathbf{g}^n\\ \dotproduct{8.00}{9.5} \end{gather*} However this solution has a disadvantage: one has two know the appropriate values for the parameters \#1 and \#2 before one applies the command. A much better solution can be achieved if we chose the packages \emph{pstricks} and \emph{pstnode}. the solution presented here works perfectly under tetex (linux). however it does not work properly under miktex and texlive. (i installed texlive so that i can check if the command mput works properly or not). The middle of the horizontal line is cleaned, however the dot created by thev command cdot is put to the end of the equation instead of being put into the middle of the horizontal line: \begin{equation*} a^{kl}_{\;\;mn}\,\Rnode{N1}{\mathbf{g}}_k \circ \mathbf{g}_l \circ \mathbf{g}^m \circ \Rnode{N2}{\mathbf{g}}^n \ncbar[linewidth=3D0.6pt,arm=3D5pt,nodesep=3D3pt,angle=3D90]{N1}{N2}% \mput*{\cdot} \end{equation*} \vspace{3mm} \noindent any help, idea, advice are welcome and are highly appreciated. \end{document} % thank you in advance. g. szeidl  This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give = us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out = more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ MiKTeXUsers mailing list MiKTeXUsers@... https://lists.sourceforge.net/lists/listinfo/miktexusers 
Sign up for the SourceForge newsletter:
No, thanks