Read Me
MediaTomb - UPnP MediaServer
This documentation is valid for MediaTomb version 0.12.1.
Copyright (c) 2005 Gena Batsyan, Sergey Bostandzhyan
Copyright (c) 2006-2010, 2013 Gena Batsyan, Sergey Bostandzhyan,
Leonhard Wimmer
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR
OWN RISK!
__________________________________________________________
Table of Contents
1. Introduction
1.1. Currently Supported Features
2. Requirements
3. Compiling From Source
3.1. Standard Method
3.2. Configure Options
4. Initial Installation
4.1. Network Setup
4.2. First Time Launch
5. Command Line Options
5.1. IP Address
5.2. Interface
5.3. Port
5.4. Configuration File
5.5. Daemon Mode
5.6. Home Directory
5.7. Config Directory
5.8. Write PID File
5.9. Run Under Different User Name
5.10. Run Under Different Group
5.11. Add Content
5.12. Log To File
5.13. Debug Output
5.14. Compile Info
5.15. Version Information
5.16. Display Command Line Summary
6. Configuration File
6.1. Server Settings
6.2. Import Settings
6.3. Transcoding Settings
7. Supported Devices
7.1. MediaRenderers
7.2. Network Attached Storage Devices
8. Running The Server
9. Legal
9.1. Copyright
9.2. License
10. Acknowledgments
11. Contributions
1. Introduction
MediaTomb is an open source (GPL) UPnP MediaServer with a nice
web user interface, it allows you to stream your digital media
through your home network and listen to/watch it on a variety
of UPnP compatible devices.
MediaTomb implements the UPnP MediaServer V 1.0 specification
that can be found on http://www.upnp.org/. The current
implementation focuses on parts that are required by the
specification, however we look into extending the functionality
to cover the optional parts of the spec as well.
MediaTomb should work with any UPnP compliant MediaRenderer,
please tell us if you experience difficulties with particular
models, also take a look at the Supported Devices list for more
information.
WARNING!
The server has an integrated file system browser in the UI,
that means that anyone who has access to the UI can browse your
file system (with user permissions under which the server is
running) and also download your data! If you want maximum
security - disable the UI completely! Account authentication
offers simple protection that might hold back your kids, but it
is not secure enough for use in an untrusted environment!
Note:
since the server is meant to be used in a home LAN
environment the UI is enabled by default and accounts
are deactivated, thus allowing anyone on your network to
connect to the user interface.
1.1. Currently Supported Features
* browse and playback your media via UPnP
* metadata extraction from mp3, ogg, flac, jpeg, etc. files.
* Exif thumbnail support
* user defined server layout based on extracted metadata
(scriptable virtual containers)
* automatic directory rescans
* sophisticated web UI with a tree view of the database and
the file system, allowing to add/remove/edit/browse your
media
* highly flexible media format transcoding via plugins /
scripts
* allows to watch YouTube(tm) videos on your UPnP player
device
* supports last fm scrobbing using lastfmlib
* on the fly video thumbnail generation with
libffmpegthumbnailer
* support for external URLs (create links to internet content
and serve them via UPnP to your renderer)
* support for ContentDirectoryService container updates
* Active Items (experimental feature), allows execution of
server side scripts upon HTTP GET requests to certain items
* highly flexible configuration, allowing you to control the
behavior of various features of the server
* runs on Linux, FreeBSD, NetBSD, Mac OS X, eCS
* runs on x86, Alpha, ARM, MIPS, Sparc, PowerPC
2. Requirements
Note:
remember to install associated development packages,
because development headers are needed for compilation!
Note:
libupnp is now a part of MediaTomb and does not have to
be installed separately. We base our heavily patched
version on libupnp 1.4.1 from http://pupnp.sf.net/
Note:
you need at least one database in order to compile and
run MediaTomb - either sqlite or mysql.
In order to compile MediaTomb you will have to install the
following packages.:
* sqlite (version > 3.x) http://www.sqlite.org/ REQUIRED (if
mysql is not available)
* mysql client library (version > 4.0.x) http://mysql.org/
REQUIRED (if sqlite is not available)
* expat http://expat.sourceforge.net/ REQUIRED
Expat is a very good and robust XML parser, since most of
UPnP is based on XML this package is a requirement.
* zlib http://www.zlib.net/ OPTIONAL, HIGHLY RECOMMENDED
Zlib is a compression library that is available on most
systems, we need it for the database autocreation
functionality. Make sure to install the zlib development
package providing zlib.h, if it is not available you will
need to create the MediaTomb sqlite3/MySQL database
manually.
* libmagic OPTIONAL, RECOMMENDED
This is the 'file' package, it is used to determine the
mime type of the media. If you don't have this you will
have to enter file extension to mime type mappings manually
in your config file.
* js - SpiderMonkey JavaScript Engine
http://www.mozilla.org/js/spidermonkey/ OPTIONAL,
RECOMMENDED, REQUIRED FOR PLAYLIST SUPPORT
This package is necessary to allow the user defined
creation of virtual containers. The import.js script
defines the layout of your media, the default import script
will create a structure sorted by Audio/Photo/Video, it
will make use of the gathered metadata (like ID3 tags) to
sort your music by Artist/Album/Genre/Year , etc. The
import script can be adjusted and modified - it allows you
to create the layout that you want.
* taglib http://developer.kde.org/~wheeler/taglib.html
OPTIONAL, RECOMMENDED
This library retrieves metadata from mp3, ogg and flac
files. You will need it if you want to have virtual objects
for those files (i.e. nice content layout).
Note:
It makes no sense to use taglib and id3lib at the
same time, the configure script will first look
for TagLib, if TagLib detection fails it will
search for id3lib. You can also force the
configure script to take the library of your
choice, overriding the default setting.
* id3lib http://id3lib.sourceforge.net/ (at least version
3.8.3) OPTIONAL, RECOMMENDED (if TagLib is not available)
This library retrieves id3 tags from mp3 files.
* libexif http://libexif.sourceforge.net/ OPTIONAL,
RECOMMENDED
You will need this library if you want to extract metadata
from images, this will allow you to have virtual containers
for your Photos, sorted by various attributes like Date,
etc. It also enables thumbnail support: if EXIF thumbnails
are present in your images they will also be offered via
UPnP.
* curl http://curl.haxx.se/ OPTIONAL, REQUIRED FOR YOUTUBE
AND SOPCAST SUPPORT
curl is a library that allows to easily fetch content from
the web, if you want to compile MediaTomb with YouTube
and/or SopCast support then curl is required.
* ffmpeg http://ffmpeg.mplayerhq.hu/ OPTIONAL
Currently ffmpeg is used to gather additional metadata from
audio and video files.
* libffmpegthumbnailer
http://code.google.com/p/ffmpegthumbnailer/ OPTIONAL
ffmpegthumbnailer is used to generate video thumbnails on
the fly. If your device (like DSM-510 or PlayStation 3)
supports video thumbnails it would be worth to compile
MediaTomb with this library.
Note:
ffmpegthumbnailer support is only provided if
MediaTomb is compiled with ffmpeg support.
* lastfmlib http://code.google.com/p/lastfmlib/ OPTIONAL
last.fm scrobbing
In order to use the web UI you will need to have javascript
enabled in your web browser.
The UI has been tested and works with the recent versions of :
* Firefox/Mozilla
* Opera
Tested and does not work with the recent versions of:
* Konqueror
* Safari
Limited functionality with:
* Internet Explorer 6 and 7
3. Compiling From Source
3.1. Standard Method
If you don't care about the details - make sure you have
installed the required packages and the appropriate development
headers and simply run
$ ./configure
$ make
$ make install
This should compile and install MediaTomb, the resulting binary
is ready to run.
Note:
if you checked out the sources from SVN the configure
script will not be available, you will have to create it
with the following command:
autoreconf -i
3.2. Configure Options
The MediaTomb configure script provides a large variety of
options, allowing you to specify the additional libraries that
will be used, features that will be compiled or disabled,
workarounds for known bugs in some distributions and so on.
Some options are straightforward, some require deeper knowledge
- make sure you know what you are doing :)
3.2.1. Install Location Of Architecture Independent Files
--prefix=PREFIX
Default:
/usr/local/
Install all architecture independent files - all .js files and
.png images for the Web UI, the import.js script, the service
description XML files - in the directory of your choice. This
is especially useful if you do not want to perform a
system-wide installation, but want to install MediaTomb only
for your user.
Important:
the prefix path will be compiled into the binary; the
binary will still be relocatable, but you move those
files you will have to point MediaTomb to the proper
location by specifying it in the server configuration
file.
3.2.2. Static Build
--enable-static
Default:
disabled
Build a static binary. This may be useful if you plan to
install a precompiled MediaTomb binary on a system that does
not have all the required libraries and where installation of
those libraries is not possible due to reasons beyond your
control.
Note:
if you enable this option, make sure that you have all
static versions of the appropriate libraries installed
on your system. The configure script may not detect that
those are missing - in this case you will get linker
errors. Some distributions, for example Fedora Core, do
not ship static library versions.
3.2.3. Automatically Create Database
--enable-db-autocreate
Default:
enabled
Automatically create the database if it is missing (for example
upon a first time launch). Disabling this will make the
resulting binary a little smaller, however you will have to
take care of the database creation yourself by invoking the
appropriate .sql scripts that are provided with the package.
Note:
the server configuration file has to be setup correctly.
Either sqlite or MySQL has to be chosen in the storage
section, for sqlite the database file has to point to a
writable location, for MySQL the user has to be setup
with a valid password and permissions and the database
"mediatomb" has to exist.
3.2.4. Debug Malloc/Realloc Of Zero bytes
--enable-debug-malloc0
Default:
disabled
This feature is only for debugging purposes, whenever a malloc
or realloc with a value of zero bytes is encountered, the
server will terminate with abort()
3.2.5. Force Linking With The Pthread Library
--enable-pthread-lib
Default:
disabled
We use the ACX_PTHREAD macro from the autoconf archive to
determine the way how to link against the pthread library.
Usually it works fine, but it can fail when cross compiling.
This configure option tells us to use -lpthread when linking,
it seems to be needed when building MediaTomb under Optware.
Note, that using --disable-pthread-lib will not prevent
automatic checks against the pthread library.
3.2.6. Force Linking With The Iconv Library
--enable-iconv-lib
Default:
disabled
By default we will attempt to use iconv functionality provided
with glibc, however under some circumstances it may make sense
to link against a separate iconv library. This option will
attempt to do that. Note, that using --disable-iconv-lib will
not prevent automatic attempts to link ageinst the iconv
library in the case where builtin glibc iconv functionality is
not available.
3.2.7. Use Atomic Assembler Code For x86 Single CPU systems
--enable-atomic-x86-single
Default:
disabled
Use assembler code suited for single CPU x86 machines. This may
improve performance, but your binary will not function properly
on SMP systems. If you specify this for a non x86 architecture
the binary will not run at all. If you wonder about the purpose
of assembler code in a mediaserver application: we need it for
atomic operations that are required for reference counting. The
pthread library will be used as a fallback for other
architectures, but can also be forced by a designated configure
option. This however, will have the worst performance.
By default x86 SMP code will be used on x86 systems - it will
reliably work on both SMP and single CPU systems, but will not
be as fast as the atomic-x86-single option on uniprocessor
machines.
3.2.8. Use Pthread Code For Atomic Operations
--enable-atomic-pthread
Default:
auto detect
This is the default setting for non x86 architectures, we may
add assembler optimizations for other architectures as well,
but currently only x86 optimizations are available. This option
may also be safely used on x86 machines - the drawback is poor
performance, compared to assembler optimized code.
3.2.9. Enable SIGHUP Handling
--enable-sighup
This option turns on SIGHUP handling, every time a SIGHUP is
caught we will attempt to restart the server and reread the
configuration file. By default this feature is enabled for x86
platforms, but is disabled for others. We discovered that
MediaTomb will not cleanly restart on ARM based systems,
investigations revealed that this is somehow related to an
unclean libupnp shutdown. This will be fixed in a later
release.
Default:
auto detect
3.2.10. X_MS_MediaReceiverRegistrar Support
--enable-mrreg-service
Default:
disabled
This option will enable the compilation and support of the
X_MS_MediaReceiverRegistrar UPnP service, this was implemented
for future Xbox 360 support. If you have a renderer that
requires this service, you can safely enable it. It will always
return true to IsValidated and IsAuthorized requests.
Note:
eventhough this service is implemented there is still no
Xbox 360 support in MediaTomb, more work needs to be
done.
3.2.11. Playstation 3 Support
--enable-protocolinfo-extension
Default:
enabled
This option allows to send additional information in the
protocolInfo attribute, this will enable MP3 and MPEG4 playback
for the Playstation 3, but may also be useful to some other
renderers.
Note:
allthough compiled in, this feature is disabled in
configuration by default.
3.2.12. Fseeko Check
--disable-fseeko-check
Default:
enabled
This is a workaround for a bug in some Debian distributions,
disable this check if you know that your system has large file
support, but configure fails to detect it.
3.2.13. Largefile Support
--disable-largefile
Default:
auto
By default largefile support will be auto detected by
configure, however you can disable it if you do not want it or
if you experience problems with it on your system.
3.2.14. Redefinition Of Malloc And Realloc
--disable-rpl-malloc
Default:
enabled
Autoconf may redefine malloc and realloc functions to
rpl_malloc and rpl_realloc, usually this will happen if the
autotools think that you are compiling against a non GNU C
library. Since malloc and realloc may behave different on other
systems, this gives us the opportunity to write wrapper
functions to handle special cases. However, this redefinition
may get triggered when cross compiling, even if you are
compiling against the GNU C lib. If this is the case, you can
use this option to disable the redefinition.
3.2.15. SQLite Support
--enable-sqlite3
Default:
enabled
The SQLite database is very easy in installation and use, you
do not have to setup any users, permissions, etc. A database
file will be simply created as specified in the MediaTomb
configuration. At least SQLite version 3 is required.
3.2.16. MySQL Support
--enable-mysql
Default:
enabled
MySQL is a very powerful database, however it requires some
additional setup. You will find information on how to setup
MediaTomb with MySQL in the Installation section.
3.2.17. SpiderMonkey LibJS Support
--enable-libjs
Default:
enabled
SpiderMonkey is Mozilla's JavaScript engine, it plays a very
important role in MediaTomb. We use it to create a nice virtual
container layout based on the metadata that is extracted from
your media. We also allow the user to create custom import
scripts, so everyone has the possibility to adapt the layout to
ones personal needs. Read more about this in the installation
section.
The main problem with this library is, that it is called
differently on various distributions and that it is installed
in different locations. For example, it is called js on Fedora,
but is available under the name of smjs on Debian. If configure
fails to find your js headers and libraries you can point it to
the desired locations (see options below).
3.2.18. Filemagic Support
--enable-libmagic
Default:
enabled
This library determines the file type and provides us with the
appropriate mime type information. It is very important to
correctly determine the mime type of your media - this
information will be sent to your renderer. Based on the mime
type information, the renderer will decide if it can
play/display the particular file or not. If auto detection
returns strange mime types, you may want to do a check using
the 'file' command (the 'file' package must be installed on
your system). Assuming that you want to check somefile.avi
enter the following in your terminal:
$ file -i somefile.avi
This will print the detected mime type, this is exactly the
information that we use in MediaTomb. You can override auto
detection by defining appropriate file extension to mime type
mappings in your configuration file. You can also edit the mime
type information of an imported object manually via the web UI.
3.2.19. Id3lib Support
--enable-id3lib
Default:
disabled, used if taglib is not available
This library will parse id3 tags of your MP3 files, the
gathered information will be saved in the database and provided
via UPnP. Further, the gathered metadata will be used by the
import script to create a nice container layout
(Audio/Artist/Album, etc.)
3.2.20. Taglib Support
--enable-taglib
Default:
enabled, preffered over id3lib
This library will parse id3 tags of your MP3 files as well as
information provided with flac files. It claims to be faster
than id3lib, but it also seems to have some drawbacks. We had
some cases where it crashed when trying to parse tags of
certain MP3 files on embedded systems, we had reports and
observed that it had problems parsing the sample rates. We also
did some valgrinding and detected memory leaks. Our feeling is,
that you will have more stable results with id3lib, however it
is up to you to enable or disable this library. By default
id3lib will be taken if both libraries are present on the
system.
3.2.21. Libexif Support
--enable-libexif
Default:
enabled
The exif library will gather metadata from your photos, it will
also find exif thumbnails which are created automatically by
most digital camera models. The gathered data will be used by
the import script, the thumbnails will be offered as additional
resources via UPnP.
3.2.22. Inotify Support
--enable-inotify
Default:
auto
Inotify is a kernel mechanism that allows monitoring of
filesystem events. You need this if you want to use the Inotify
Autoscan mode, contrary to the Timed mode which recsans given
directories in specified intervals, Inotify mode will
immedeately propagate changes in monitored directories on the
filesystem to the database.
If you do not specify this option configure will check if
inotify works on the build system and compile it in only if the
check succeeds. If you specify this option, the functionality
will be compiled in even if the build system does not support
inotify - the availability of inotify will then be checked at
server runtime.
3.2.23. YouTube Service Support
--enable-youtube
Default:
enabled
This option enabled support of the YouTube service, it allows
to gather information about content on the YouTube site and
offers the content via UPnP, thus enabling you to watch your
favorite YouTube videos on your UPnP player device. The feature
only makes sense in combination with transcoding, since most
devices do not support playback of flv files natively.
3.2.24. External Transcoding
--enable-external-transcoding
Default:
enabled
3.2.25. Sqlite Backup Defaults
--enable-sqlite-backup-defaults
Default:
disabled
Enables backup option for sqlite as the default setting, might
be useful for NAS builds.
3.2.26. Curl
--enable-curl
Default:
enabled if external transcoding or YouTube features are
turned on
It only makes sense to enable the curl library if YouTube and
External Transcoding are turned on. YouTube requires curl, but
it's optional for External Transcoding.
3.2.27. Ffmpeg Support
--enable-ffmpeg
Default:
enabled
Currently the ffmpeg library is used to extract additional
information from audio and video files. It is also capable of
reading out the tag information from theora content. It is not
yet used for transcoding, so this feature only gathers
additional metadata.
3.2.28. Ffmpeg Thumbnailer Support
--enable-ffmpegthumbnailer
Default:
enabled
Compiling with ffmpegthumbnailer support is only possible if
you also compile with ffmpeg support. The library allows to
generate thumbnails for the videos on the fly.
3.2.29. MediaTomb Debug Output
--enable-tombdebug
Default:
disabled
This option enables debug output, the server will print out a
lot of information which is mainly interesting to developers.
Use this if you are trying to trace down a bug or a problem,
the additional output may give you some clues.
3.2.30. UPnP Library Debug Output
--enable-upnpdebug
Default:
disabled
This option enables debug output of the UPnP SDK. You should
not need it under normal circumstances.
3.2.31. Log Output
--disable-log
Default:
enabled
This option allows you to suppress all log output from the
server.
3.2.32. Debug Log Output
Default:
enabled
This option allows you to compile the server with debug
messages. If enabled, switching between verbose and normal
output during runtime becomes possible.
3.2.33. Package Search Directory
--with-search=DIR
Default:
/opt/local/ on Darwin, /usr/local/ on all other systems
Some systems may have whole sets of packages installed in an
alternative location, for example Darwinports on OSX get
installed to /opt/local/. This option tells the configure
script to additionally search for headers and libraries of
various packages in DIR/include and DIR/lib.
3.2.34. Specifying Header And Library Locations Of Various Packages
You can specify the exact location of particular headers and
libraries. Some packages use extra programs that tell us the
appropriate flags that are needed for compilation - like
mysql_config. You can also specify the exact location of those
programs. The parameters are self explanatory, in case of
headers and libraries the DIR parameter is the directory where
those headers and libraries are located.
--with-sqlite3-h=DIR search for sqlite3 headers only in DI
R
--with-sqlite3-libs=DIR search for sqlite3 libraries only in
DIR
--with-mysql-cfg=mysql_config absolute path/name of mysql_config
--with-js-h=DIR search for js (spidermonkey) headers
in DIR
--with-js-libs=DIR search for js (spidermonkey) librarie
s in DIR
--with-libmagic-h=DIR search for filemagic headers in DIR
--with-libmagic-libs=DIR search for filemagic headers in DIR
--with-libexif-h=DIR search for libexif headers in DIR
--with-libexif-libs=DIR search for libexif libraries in DIR
--with-expat-h=DIR search for expat headers in DIR
--with-expat-libs=DIR search for expat libraries in DIR
--with-taglib-cfg=taglib-config absolute path/name of taglib-config
--with-id3lib-h=DIR search for id3lib headers in DIR
--with-id3lib-libs=DIR search for id3lib libraries in DIR
--with-zlib-h=DIR search for zlib headers in DIR
--with-zlib-libs=DIR search for zlib libraries in DIR
--with-inotify-h=DIR search for inotify header in DIR
--with-iconv-h=DIR search for iconv headers in DIR/sys
--with-iconv-libs=DIR search for iconv libraries in DIR
--with-avformat-h=DIR search for avformat headers in DIR
--with-avformat-libs=DIR search for avformat libraries in DIR
--with-avutil-libs=DIR search for avutil libraries in DIR
--with-ffmpegthumbnailer-h=DIR search for ffmpegthumbnailer headers
in DIR
--with-ffmpegthumbnailer-libs=DIR search for ffmpegthumbnailer librarie
s in DIR
--with-curl-cfg=curl-config absolute path/name of curl-config scr
ipt
--with-libmp4v2-h=DIR search for libmp4v2 headers in DIR
--with-libmp4v2-libs=DIR search for libmp4v2 libraries in DIR
--with-rt-libs=DIR search for rt libraries in DIR
--with-pthread-libs=DIR search for pthread libraries in DIR
--with-lastfmlib-h=DIR search for lastfmlib headers in DIR
--with-lastfmlib-libs=DIR search for lastfmlib libraries in DIR
3.2.35. The devconf Script
If you are doing some development work and some debugging, you
will probably want to compile with the -g flag and also disable
optimization. The devconf script does exactly that. In
addition, it accepts command line parameters that are passed to
the configure script.
4. Initial Installation
4.1. Network Setup
Some systems require a special setup on the network interface.
If MediaTomb exits with UPnP Error -117, or if it does not
respond to M-SEARCH requests from the renderer (i.e. MediaTomb
is running, but your renderer device does not show it) you
should try the following settings (the lines below assume that
MediaTomb is running on a Linux machine, on network interface
eth1):
# route add -net 239.0.0.0 netmask 255.0.0.0 eth1
# ifconfig eth1 allmulti
Those settings will be applied automatically by the init.d
startup script.
You should also make sure that your firewall is not blocking
port UDP port 1900 (required for SSDP) and UDP/TCP port of
MediaTomb. By default MediaTomb will select a free port
starting with 49152, however you can specify a port of your
choice in the configuration file.
4.2. First Time Launch
When starting MediaTomb for the first time, a .mediatomb
directory will be created in your home. Further, a default
server configuration file, called config.xml will be generated
in that directory.
4.2.1. Using Sqlite Database
If you are using sqlite - you are ready to go, the database
file will be created automatically and will be located
~/.mediatomb/mediatomb.db If needed you can adjust the database
file name and location in the server configuration file.
4.2.2. Using MySQL Database
If MediaTomb was compiled with support for both databases,
sqlite will be chosen as default because the initial database
can be created and used without any user interaction. If
MediaTomb was compiled only with MySQL support, the appropriate
config.xml file will be created in the ~/.mediatomb directory,
but the server will then terminate, because user interaction is
required.
MediaTomb has to be able to connect to the MySQL server and at
least the (empty) database has to exist. To create the database
and provide MediaTomb with the ability to connect to the MySQL
server you need to have the appropriate permissions. Note that
user names and passwords in MySQL have nothing to do with UNIX
accounts, MySQL has it's own user names/passwords. Connect to
the MySQL database as "root" or any other user with the
appropriate permissions:
$ mysql [-u <username>] [-p]
(You'll probably need to use "-u" to specify a different MySQL
user and "-p" to specify a password.)
Create a new database for MediaTomb: (substitute "<database
name>" with the name of the database)
mysql> CREATE DATABASE <database name>;
(You can also use "mysqladmin" instead.)
Give MediaTomb the permissions to access the database:
mysql> GRANT ALL ON <database name>.*
TO '<user name>'@'<hostname>'
IDENTIFIED BY '<password>';
If you don't want to set a password, omit "IDENTIFIED BY .."
completely. You could also use the MySQL "root" user with
MediaTomb directly, but this is not recommended.
To create a database and a user named "mediatomb" (who is only
able to connect via "localhost") without a password (the
defaults) use:
mysql> CREATE DATABASE mediatomb;
mysql> GRANT ALL ON mediatomb.* TO 'mediatomb'@'localhost';
If MediaTomb was compiled with database auto creation the
tables will be created automatically during the first startup.
All table names have a "mt_" prefix, so you can theoretically
share the database with a different application. However, this
is not recommended.
If database auto creation wasn't compiled in (configure was run
with the "--disable-db-autocreate" or zlib.h was not available)
you have to create the tables manually:
$ mysql [-u <username>] [-p] \
<database name> < \
<install prefix>/share/mediatomb/mysql.sql
After creating the database and making the appropriate changes
in your MediaTomb config file you are ready to go - launch the
server, and everything should work.
5. Command Line Options
There is a number of options that can be passed via command
line upon server start up, for a short summary you can invoke
MediaTomb with the following parameter:
$ mediatomb --help
Note:
the command line options override settings in the
configuration file!
5.1. IP Address
--ip or -i
The server will bind to the given IP address, currently we can
not bind to multiple interfaces so binding to 0.0.0.0 will not
be possible.
5.2. Interface
--interface or -e
Interface to bind to, for example eth0, this can be specified
instead of the ip address.
5.3. Port
--port or -p
Specify the server port that will be used for the web user
interface, for serving media and for UPnP requests, minimum
allowed value is 49152. If this option is omitted a default
port will be chosen, however, in this case it is possible that
the port will change upon server restart.
5.4. Configuration File
--config or -c
By default MediaTomb will search for a file named "config.xml"
in the ~/.mediatomb directory. This option allows you to
specify a config file by the name and location of your choice.
The file name must be absolute.
5.5. Daemon Mode
--daemon or -d
Run the server in background, MediaTomb will shutdown on
SIGTERM, SIGINT and restart on SIGHUP.
5.6. Home Directory
--home or -m
Specify an alternative home directory. By default MediaTomb
will try to retrieve the users home directory from the
environment, then it will look for a .mediatomb directory in
users home. If .mediatomb was found we will try to find the
default configuration file (config.xml), if not found we will
create both, the .mediatomb directory and the default config
file.
This option is useful in two cases: when the home directory can
not be retrieved from the environment (in this case you could
also use -c to point MediaTomb to your configuration file or
when you want to create a new configuration in a non standard
location (for example, when setting up daemon mode). In the
latter case you can combine this parameter with the parameter
described in Section 5.7, "Config Directory"
5.7. Config Directory
--cfgdir or -f
The default configuration directory is combined out of the
users home and the default that equals to .mediatomb, this
option allows you to override the default directory naming.
This is useful when you want to setup the server in a
nonstandard location, but want that the default configuration
to be written by the server.
5.8. Write PID File
--pidfile or -P
Specify a file that will hold the server process ID, the
filename must be absolute.
5.9. Run Under Different User Name
--user or -u
Run MediaTomb under the specified user name, this is especially
useful in combination with the daemon mode.
5.10. Run Under Different Group
--group or -g
Run MediaTomb under the specified group, this is especially
useful in combination with the daemon mode.
5.11. Add Content
--add or -a
Add the specified directory or file name to the database
without UI interaction. The path must be absolute, if path is a
directory then it will be added recursively. If path is a file,
then only the given file will be imported.
5.12. Log To File
--logfile or -l
Do not output log messages to stdout, but redirect everything
to a specified file.
5.13. Debug Output
--debug or -D
Enable debug log output.
5.14. Compile Info
--compile-info
Print the configuration summary (used libraries and enabled
features) and exit.
5.15. Version Information
--version
Print version information and exit.
5.16. Display Command Line Summary
--help or -h
Print a summary about the available command line options.
6. Configuration File
MediaTomb is highly configurable and allows the user to set
various options and preferences that define the servers
behavior. Rather than enforcing certain features upon the user,
we prefer to offer a number of choices where possible. The
heart of MediaTomb configuration is the config.xml file, which
is located in the ~/.mediatomb directory. If the configuration
file is not found in the default location and no configuration
was specified on the command line, MediaTomb will generate a
default config.xml file in the ~/.mediatomb directory. The file
is in the XML format and can be edited by a simple text editor,
here is the list of all available options:
* "Required" means that the server will not start if the tag
is missing in the configuration.
* "Optional" means that the tag can be left out of the
configuration file.
The root tag of MediaTomb configuration is:
<config>
6.1. Server Settings
These settings define the server configuration, this includes
UPnP behavior, selection of database, accounts for the UI as
well as installation locations of shared data.
<server>
Required
This section defines the server configuration parameters.
Child tags:
*
<port>0</port>
Optional
Default: 0 (automatic)
Specifies the port where the server will be listening for
HTTP requests. Note, that because of the implementation in
the UPnP SDK only ports above 49152 are supported. The
value of zero means, that a port will be automatically
selected by the SDK.
*
<ip>192.168.0.23</ip>
Optional
Default: ip of the first available interface.
Specifies the IP address to bind to, by default one of the
available interfaces will be selected.
*
<interface>eth0</interface>
Optional
Default: first available interface.
Specifies the interface to bind to, by default one of the
available interfaces will be selected.
*
<name>MediaTomb</name>
Optional
Default: MediaTomb
Server friendly name, you will see this on your devices
that you use to access the server.
*
<manufacturerURL>http://mediatomb.org/</manufacturerURL>
Optional
Default: http://mediatomb.cc/
This tag sets the manufacturer URL of a UPnP device, a
custom setting may be necessary to trick some renderers in
order to enable special features that otherwise are only
active with the vendor implemented server.
*
<modelName>MediaTomb</modelName>
Optional
Default: MediaTomb
This tag sets the model name of a UPnP device, a custom
setting may be necessary to trick some renderers in order
to enable special features that otherwise are only active
with the vendor implemented server.
*
<modelNumber>0.9.0</modelNumber>
Optional
Default: MediaTomb version
This tag sets the model number of a UPnP device, a custom
setting may be necessary to trick some renderers in order
to enable special features that otherwise are only active
with the vendor implemented server.
*
<serialNumber>1</serialNumber>
Optional
Default: 1
This tag sets the serial number of a UPnP device.
*
<presentationURL append-to="ip">80/index.html</presentationURL>
Optional
Default: "/"
The presentation URL defines the location of the servers
user interface, usually you do not need to change this
however, vendors who want to ship our server along with
their NAS devices may want to point to the main
configuration page of the device.
Attributes:
+
append-to=...
Optional
Default: "none"
The append-to attribute defines how the text in the
presentationURL tag should be treated.
The allowed values are:
append-to="none"
Use the string exactly as it appears in the
presentationURL tag.
append-to="ip"
Append the string specified in the presentationURL tag
to the ip address of the server, this is useful in a
dynamic ip environment where you do not know the ip
but want to point the URL to the port of your web
server.
append-to="port"
Append the string specified in the presentationURL tag
to the server ip and port, this may be useful if you
want to serve some static pages using the built in web
server.
*
<udn/>
Required
Default: automatically generated if the tag is empty
Unique Device Name, according to the UPnP spec it must be
consistent throughout reboots. You can fill in something
yourself, but we suggest that you leave this tag empty - it
will be filled out and saved automatically after the first
launch of the server.
*
<home>/home/your_user_name/.mediatomb</home>
Required
Default: ~/.mediatomb
Server home - the server will search for the data that it
needs relative to this directory - basically for the sqlite
database file. The mediatomb.html bookmark file will also
be generated in that directory.
*
<webroot>/usr/share/mediatomb/web</webroot>
Required
Default: depends on the installation prefix that is passed
to the configure script.
Root directory for the web server, this is the location
where device description documents, UI html and js files,
icons, etc. are stored.
*
<servedir>/home/myuser/mystuff</servedir>
Optional
Default: empty (disabled)
Files from this directory will be served as from a regular
web server. They do not need to be added to the database,
but they are also not served via UPnP browse requests.
Directory listing is not supported, you have to specify
full paths.
Example:
the file something.jar is located in
/home/myuser/mystuff/javasubdir/something.jar on
your filesystem. Your ip address is 192.168.0.23,
the server is running on port 50500. Assuming the
above configuration you could download it by
entering this link in your web browser:
http://192.168.0.23:50500/content/serve/javasubdir
/something.jar
*
<alive>180</alive>
Optional
Default: 180, this is according to the UPnP specification.
Interval for broadcasting SSDP:alive messages
*
<protocolInfo extend="no"/>
Optional
Default: no
Adds specific tags to the protocolInfo attribute, this is
required to enable MP3 and MPEG4 playback on Playstation 3.
*
<pc-directory upnp-hide="no"/>
Optional
Default: no
Enabling this option will make the PC-Directory container
invisible for UPnP devices.
Note:
independent of the above setting the container
will be always visible in the web UI!
*
<tmpdir>/tmp/</tmpdir>
Optional
Default: /tmp/
Selects the temporary directory that will be used by the
server.
*
<bookmark>mediatomb.html</bookmark>
Optional
Default: mediatomb.html
The bookmark file offers an easy way to access the user
interface, it is especially helpful when the server is not
configured to run on a fixed port. Each time the server is
started, the bookmark file will be filled in with a
redirect to the servers current IP address and port. To use
it, simply bookmark this file in your browser, the default
location is ~/.mediatomb/mediatomb.html
*
<custom-http-headers>
Optional
This section holds the user defined HTTP headers that will
be added to all HTTP responses that come from the server.
Child tags:
+
<add header="..."/>
<add header="..."/>
...
Optional
Specify a header to be added to the response. If you
have a DSM-320 use <add header="X-User-Agent:
redsonic"/> to fix the .AVI playback problem.
*
<upnp-string-limit>
Optional
Default: disabled
This will limit title and description length of containers
and items in UPnP browse replies, this feature was added a
s workaround for the TG100 bug which can only handle titles
no longer than 100 characters. A negative value will
disable this feature, the minimum allowed value is "4"
because three dots will be appended to the string if it has
been cut off to indicate that limiting took place.
*
<ui enabled="yes" poll-interval="2" poll-when-idle="no"/>
Optional
This section defines various user interface settings.
WARNING!
The server has an integrated filesystem browser, that means
that anyone who has access to the UI can browse your
filesystem (with user permissions under which the server is
running) and also download your data! If you want maximum
security - disable the UI completely! Account
authentication offers simple protection that might hold
back your kids, but it is not secure enough for use in an
untrusted environment!
Note:
since the server is meant to be used in a home LAN
environment the UI is enabled by default and
accounts are deactivated, thus allowing anyone on
your network to connect to the user interface.
Attributes:
+
enabled=...
Optional
Default: yes
Enables ("yes") or disables ("no") the web user
interface.
+
show-tooltips=...
Optional
Default: yes
This setting specifies if icon tooltips should be
shown in the web UI.
+
poll-interval=...
Optional
Default: 2
The poll-interval is an integer value which specifies
how often the UI will poll for tasks. The interval is
specified in seconds, only values greater than zero
are allowed.
+
poll-when-idle=...
Optional
Default: no
The poll-when-idle attribute influences the behavior
of displaying current tasks: - when the user does
something in the UI (i.e. clicks around) we always
poll for the current task and will display it - if a
task is active, we will continue polling in the
background and update the current task view
accordingly - when there is no active task (i.e. the
server is currently idle) we will stop the background
polling and only request updates upon user actions,
but not when the user is idle (i.e. does not click
around in the UI)
Setting poll-when-idle to "yes" will do background
polling even when there are no current tasks; this may
be useful if you defined multiple users and want to
see the tasks the other user is queuing on the server
while you are actually idle.
The tasks that are monitored are:
o adding files or directories
o removing items or containers
o automatic rescans
Child tags:
+
<accounts enabled="yes" session-timeout="30"/>
Optional
This section holds various account settings.
Attributes:
o
enabled=...
Optional
Default: yes
Specifies if accounts are enabled ("yes") or
disabled ("no").
o
session-timeout=...
Optional
Default: 30
The session-timeout attribute specifies the
timeout interval in minutes. The server checks
every five minutes for sessions that have timed
out, therefore in the worst case the session
times out after session-timeout + 5 minutes.
Accounts can be defined as shown below:
o
<account user="name" password="password"/>
<account user="name" password="password"/>
....
Optional
There can be multiple users, however this is
mainly a feature for the future. Right now there
are no per-user permissions.
+
<items-per-page default="25">
Optional
Default: 25
This sets the default number of items per page that
will be shown when browsing the database in the web
UI.
The values for the items per page drop down menu can
be defined in the following manner:
o
<option>10</option>
<option>25</option>
<option>50</option>
<option>100</option>
Default: 10, 25, 50, 100
Note:
this list must contain the default
value, i.e. if you define a default
value of 25, then one of the <option>
tags must also list this value.
*
<storage caching="yes">
Required
Defines the storage section - database selection is done
here. Currently sqlite3 and mysql are supported. Each
storage driver has it's own configuration parameters.
+
caching="yes"
Optional
Default: yes
Enables caching, this feature should improve the
overall import speed.
+
<sqlite enabled="yes>
Required if MySQL is not defined
Allowed values are "sqlite3" or "mysql", the available
options depend on the selected driver.
o
enabled="yes"
Optional
Default: yes
Below are the sqlite driver options:
o
<database-file>mediatomb.db</database-file>
Optional
Default: mediatomb.db
The database location is relative to the server's
home, if the sqlite database does not exist it
will be created automatically.
o
<synchronous>off</synchronous>
Optional
Default: off
Possible values are "off", "normal" and "full".
This option sets the SQLite pragma "synchronous".
This setting will affect the performance of the
database write operations. For more information
about this option see the SQLite documentation:
http://www.sqlite.org/pragma.html#pragma_synchron
ous
o
<on-error>restore</on-error>
Optional
Default: restore
Possible values are "restore" and "fail".
This option tells MediaTomb what to do if an
SQLite error occurs (no database or a corrupt
database). If it is set to "restore" it will try
to restore the database from a backup file (if
one exists) or try to recreate a new database
from scratch.
If the option is set to "fail", MediaTomb will
abort on an SQLite error.
o
<backup enabled="no" interval="6000"/>
Optional
Backup parameters:
#
enabled=...
Optional
Default: no
Enables or disables database backup.
#
interval=...
Optional
Default: 600
Defines the backup interval in seconds.
+
<mysql enabled="no"/>
Defines the MySQL storage driver section.
o
enabled=...
Optional
Default: yes
Enables or disables the MySQL driver.
Below are the child tags for MySQL:
o
<host>localhost</host>
Optional
Default: "localhost"
This specifies the host where your MySQL database
is running.
o
<port>0</port>
Optional
Default: 0
This specifies the port where your MySQL database
is running.
o
<username>root</username>
Optional
Default: "mediatomb"
This option sets the user name that will be used
to connect to the database.
o
<password></password>
Optional
Default: no password
Defines the password for the MySQL user. If the
tag doesn't exist MediaTomb will use no password,
if the tag exists, but is empty MediaTomb will
use an empty password. MySQL has a distinction
between no password and an empty password.
o
<database>mediatomb</database>
Optional
Default: "mediatomb"
Name of the database that will be used by
MediaTomb.
6.1.1. Extended Runtime Options
<extended-runtime-options>
These options reside under the server tag and allow to
additinally control the so called "runtime options". The
difference to the import options is:
Import options are only triggered when data is being imported
into the database, this means that if you want new settings to
be applied to already imported data, you will have to reimport
it. Runtime options can be switched on and off without the need
to reimport any media. Unfortunately you still need to restart
the server so that these options take effect, however after
that they are immediately active.
*
<ffmpegthumbnailer enabled="no">
Optional
Default: no
Ffmpegthumbnailer is a nice, easy to use library that
allows to generate thumbnails from video files. Some DLNA
compliant devices support video thumbnails, if you think
that your device may be one of those you can try enabling
this option. It would also make sense to enable the
protocolInfo option, since it will add specific DLNA tags
to tell your device that a video thumbnail is being offered
by the server.
Note:
thumbnails are not cached and not stored anywhere,
they will be generated on the fly in memory and
released afterwards. If your device supports video
thumbnails and requests them from the server in
large amounts, the performance when browsing video
containers will depend on the speed of your
machine. A feature to allow caching of thumbnails
is planned for future releases.
The following options allow to control the
ffmpegthumbnailer library (these are basically the same
options as the ones offered by the ffmpegthumbnailer
command line application). All tags below are optional and
have sane default values.
+
<thumbnail-size>128</thumbnail-size>
Optional
Default: 128
The thumbnail size should not exceed 160x160 pixels,
higher values can be used but will mostprobably not be
supported by DLNA devices. The value of zero or less
is not allowed.
+
<seek-percentage>5</seek-percentage>
Optional
Default: 5
Time to seek to in the movie (percentage), values less
than zero are not allowed.
+
<filmstrip-overlay>yes</filmstrip-overlay>
Optional
Default: yes
Creates a filmstrip like border around the image, turn
this option off if you want pure images.
+
<image-quality>8</image-quality>
Optional
Default: 8
Sets the image quality of the generated thumbnails.
+
<workaround-bugs>no</workaround-bugs>
Optional
Default: no
Accodring to ffmpegthumbnailer documentation, this
option will enable workarounds for bugs in older
ffmpeg versions. You can try enabling it if you
experience unexpected behaviour, like hangups during
thumbnail generation, crashes and alike.
*
<lastfm enabled="no">
Optional
Support for the last.fm service.
+
<username>login</username>
Required
Your last.fm user name.
+
<password>pass</password>
Required
Your last.fm password.
*
<mark-played-items enabled="no" suppress-cds-updates="yes">
Optional
The attributes of the tag have the following meaning:
+
enabled=...
Optional
Default: no
Enables or disables the marking of played items, seto
to "yes" to enable the feature.
+
suppress-cds-updates=...
Optional
Default: yes
This is an advanced feature, leave the default setting
if unsure. Usually, when items are modified we send
out container updates as specified in the Content
Directory Service. This notifies the player that data
in a particular container has changed, players that
support CDS updates will rebrowse the container and
refresh the view. However, in this case we probably do
not want it (this actually depends on the particular
player implementation). For example, if we update the
list of currently playing items, the player could
interrupt playback and rebrowse the current container
- clearly an unwatned behaviour. Because of this, we
provide an option to suppress and not send out
container updates - only for the case where the item
is marked as "played". In order to see the changes you
will have to get out of the current container and
enter it again - then the view on your player should
get updated.
Note:
some players (i.e. PS3) cache a lot of data
and do not react to container updates, for
those players it may be necessary to leave
the server view or restart the player in
order to update content (same as when adding
new data).
The following tag defines how played items should be
marked:
+
<string mode="prepend">* </string>
Optional
Default: *
Specifies what string should be appended or prepended
to the title of the object that will be marked as
"played".
o
mode=...
Optional
Default: prepend
Specifies how a string should be added to the
object's title, allowed values are "append" and
"prepend".
+
<mark>
Optional
This subsection allows to list which type of content
should get marked. We figured, that marking played
items is mostly useful for videos, mainly for watching
series. It could also be used with audio and image
content, but otherwise it's probably useless. Thefore
we decided to specify only three supported types that
can get marked:
o
<content>audio</content>
<content>video</content>
<content>image</content>
You can specify any combination of the above tags
to mark the items you want.
6.2. Import Settings
The import settings define various options on how to aggregate
the content.
<import hidden-files="no">
Optional
This tag defines the import section.
Attributes:
*
hidden-files=...
Optional
Default: no
This attribute defines if files starting with a dot will be
imported into the database ("yes"). Autoscan can override
this attribute on a per directory basis.
Child tags:
*
<filesystem-charset>ISO-8859-1</filesystem-charset>
Optional
Default: if nl_langinfo() function is present, this setting
will be auto detected based on your system locale, else set
to ISO-8859-1
Defines the charset of the filesystem. For example, if you
have file names in Cyrillic KOI8-R encoding, then you
should specify that here. The server uses UTF-8 internally,
this import parameter will help you to correctly import
your data.
*
<metadata-charset>ISO-8859-1</metadata-charset>
Optional
Default: if nl_langinfo() function is present, this setting
will be auto detected based on your system locale, else set
to ISO-8859-1
Same as above, but defines the charset of the metadata
(i.e. id3 tags, Exif information, etc.)
*
<scripting script-charset="UTF-8">
Optional
Defines the scripting section.
+
script-charset=...
Optional
Default: UTF-8
Below are the available scripting options:
+
<virtual-layout type="builtin">
Optional
Defines options for the virtual container layout; the
so called "virtual container layout" is the way how
the server organizes the media according to the
extracted metadata. For example, it allows sorting
audio files by Album, Artist, Year and so on.
o
type=...
Optional
Default: builtin
Specifies what will be used to create the virtual
layout, possible values are:
# builtin: a default layout will be created by
the server
# js: a user customizable javascript will be
used (MediaTomb must be compiled with js
support)
# disabled: only PC-Directory structure will
be created, i.e. no virtual layout
The virtual layout can be adjusted using an import
script which is defined as follows:
o
<import-script>/path/to/my/import-script.js</import-script>
Required if virtual layout type is "js"
Default: ${prefix}/share/mediatomb/js/import.js,
where ${prefix} is your installation prefix
directory.
Points to the script invoked upon media import.
For more details read doc/scripting.txt
o
<dvd-script>/path/to/my/import-dvd.js</dvd-script>
Optional, only has effect when layout type is
"js" and if MediaTomb was compiled with
libdvdread support.
Default:
${prefix}/share/mediatomb/js/import-dvd.js, where
${prefix} is your installation prefix directory.
Points to the script invoked upon import of DVD
iso images. For more details read
doc/scripting.txt
+
<common-script>/path/to/my/common-script.js</common-script>
Optional
Default: ${prefix}/share/mediatomb/js/common.js, where
${prefix} is your installation prefix directory.
Points to the so called common script - think of it as
a custom library of js helper functions, functions
added there can be used in your import and in your
playlist scripts. For more details read
doc/scripting.txt
+
<playlist-script create-link="yes">/path/to/my/playlist-script.js</playl
ist-script>
Optional
Default: ${prefix}/share/mediatomb/js/playlists.js,
where ${prefix} is your installation prefix directory.
Points to the script that is parsing various
playlists, by default parsing of pls and m3u playlists
is implemented, however the script can be adapted to
parse almost any kind of text based playlist. For more
details read doc/scripting.txt
o
create-link=...
Optional
Default: yes
Links the playlist to the virtual container which
contains the expanded playlist items. This means,
that if the actual playlist file is removed from
the database, the virtual container corresponding
to the playlist will also be removed.
*
<magic-file>/path/to/my/magic-file</magic-file>
Optional
Default: System default
Specifies an alternative file for filemagic, containing
mime type information.
*
<autoscan use-inotify="auto">
Optional
Specifies a list of default autoscan directories.
This section defines persistent autoscan directories. It is
also possible to define autoscan directories in the UI, the
difference is that autoscan directories that are defined
via the config file can not be removed in the UI. Even if
the directory gets removed on disk, the server will try to
monitor the specified location and will re add the removed
directory if it becomes available/gets created again.
+
use-inotify=...
Optional
Default: auto
Specifies if the inotify autoscan feature should be
enabled. The default value is "auto", which means that
availability of inotify support on the system will be
detected automatically, it will then be used if
available. Setting the option to 'no' will disable
inotify even if it is available. Allowed values:
"yes", "no", "auto"
Child tags:
+
<directory location="/media" mode="timed" interval="3600"
level="full" recursive="no" hidden-files="no"/>
<directory location="/audio" mode="inotify"
recursive="yes" hidden-files="no"/>
...
Optional
Defines an autoscan directory and it's parameters.
The attributes specify various autoscan options:
o
location=...
Required
Absolute path to the directory that shall be
monitored.
o
mode=...
Required
Scan mode, currently "inotify" and "timed" are
supported. Timed mode rescans the given directory
in specified intervals, inotify mode uses the
kernel inotify mechanism to watch for filesystem
events.
o
interval=...
Required for "timed" mode
Scan interval in seconds.
o
level=...
Required for "timed" mode
Either "full" or "basic". Basic mode will only
check if any files have been added or were
deleted from the monitored directory, full mode
will remember the last modification time and re
add the media that has changed. Full mode might
be useful when you want to monitor changes in the
media, like id3 tags and alike.
o
recursive=...
Required
Values of "yes" or "no" are allowed, specifies if
autoscan shall monitor the given directory
including all sub directories.
o
hidden-files=...
Optional
Default: value specified in <import
hidden-files=""/>
Allowed values: "yes" or "no", process hidden
files, overrides the hidden-files value in the
<import/> tag.
*
<mappings>
Optional
Defines various mapping options for importing media,
currently two subsections are supported.
This section defines mime type and upnp:class mappings, it
is vital if filemagic is not available - in this case media
type auto detection will fail and you will have to set the
mime types manually by matching the file extension. It is
also helpful if you want to override auto detected mime
types or simply skip filemagic processing for known file
types.
+
<extension-mimetype ignore-unknown="no" case-sensitive="no">
Optional
This section holds the file name extension to mime
type mappings.
Attributes:
o
ignore-unknown=...
Optional
Default: no
If ignore-unknown is set to "yes", then only the
extensions that are listed in this section are
imported.
o
case-sensitive=...
Optional
Default: no
Specifies if extensions listed in this section
are case sensitive, allowed values are "yes" or
"no".
Child tags:
o
<map from="mp3" to="audio/mpeg"/>
Optional
Specifies a mapping from a certain file name
extension (everything after the last dot ".") to
mime type.
Note:
this improves the import speed,
because invoking libmagic to discover
the right mime type of a file is
omitted for files with extensions
listed here.
Note:
extension is case sensitive, this will
probably need to be fixed.
+
<mimetype-upnpclass>
Optional
This section holds the mime type to upnp:class
mappings.
Child tags:
o
<map from="audio/*" to="object.item.audioItem.musicTrack"/>
Optional
Specifies a mapping from a certain mime type to
upnp:class in the Content Directory. The mime
type can either be entered explicitly
"audio/mpeg" or using a wildcard after the slash
"audio/*". The values of "from" and "to"
attributes are case sensitive.
+
<mimetype-contenttype>
Optional
This section makes sure that the server knows about
remapped mimetypes and still extracts the metadata
correctly. For example, we know that id3lib can only
handle mp3 files, the default mimetype of mp3 content
is audio/mpeg. If the user remaps mp3 files to a
different mimetype, we must know about it so we can
still pass this item to id3lib for metadata
extraction.
Note:
if this section is not present in your
config file, the defaults will be filled in
automatically. However, if you add an empty
tag, without defining the following <treat>
tags, the server will assume that you want
to have an empty list and no files will be
process by the metadata handler.
o
<treat mimetype="audio/mpeg" as="mp3"/>
Optional
Tells the server what content the specified
mimetype actually is.
Note:
it makes no sense to define 'as'
values that are not below, the server
only needs to know the content type of
the ones specified, otherwise it does
not matter.
The 'as' attribute can have following values:
#
mp3
Default mimetype: audio/mpeg
The content is an mp3 file and should be
processed by either id3lib or taglib (if
available).
#
ogg
Default mimetype: application/ogg
The content is an ogg file and should be
processed by taglib (if available).
#
flac
Default mimetype: audio/x-flac
The content is a flac file and should be
processed by taglib (if available).
#
jpg
Default mimetype: image/jpeg
The content is a jpeg image and should be
processed by libexif (if available).
#
playlist
Default mimetype: audio/x-mpegurl or
audio/x-scpls
The content is a playlist and should be
processed by the playlist parser script.
#
pcm
Default mimetype: audio/L16 or audio/x-wav
The content is a PCM file.
#
avi
Default mimetype: video/x-msvideo
The content is an AVI container, FourCC
extraction will be attempted.
*
<library-options>
Optional
This section holds options for the various supported import
libraries, it is useful in conjunction with virtual
container scripting, but also allows to tune some other
features as well.
Currently the library-options allow additional extraction
of the so called auxilary data (explained below) and
provide control over the video thumbnail generation.
Here is some information on the auxdata: UPnP defines
certain tags to pass along metadata of the media (like
title, artist, year, etc.), however some media provides
more metadata and exceeds the scope of UPnP. This
additional metadata can be used to fine tune the server
layout, it allows the user to create a more complex
container structure using a customized import script. The
metadata that can be extracted depends on the library,
currently we support libebexif which provides a default set
of keys that can be passed in the options below. The data
according to those keys will the be extracted from the
media and imported into the database along with the item.
When processing the item, the import script will have full
access to the gathered metadata, thus allowing the user to
organize the data with the use of the extracted
information. A practical example would be: if have more
than one digital camera in your family you could extract
the camera model from the Exif tags and sort your photos in
a structure of your choice, like:
Photos/MyCamera1/All Photos
Photos/MyCamera1/Date
Photos/MyCamera2/All Photos
Photos/MyCamera2/Date
etc.
Child tags:
+
<libexif>
Optional
Options for the exif library.
Child tags:
o
<auxdata>
Optional
Currently only adding keywords to auxdata is
supported. For a list of keywords/tags see the
libexif documentation. Auxdata can be read by the
import java script to gain more control over the
media structure.
Child tags:
#
<add-data tag="keyword1"/>
<add-data tag="keyword2"/>
...
Optional
If the library was able to extract the data
according to the given keyword, it will be
added to auxdata. You can then use that data
in your import scripts.
A sample configuration for the example described above
would be:
<libexif>
<auxdata>
<add-data tag="EXIF_TAG_MODEL"/>
</auxdata>
</libexif>
+
<id3>
Optional
These options apply to id3lib or taglib libraries.
Child tags:
o
<auxdata>
Optional
Currently only adding keywords to auxdata is
supported. The keywords are those defined in the
id3 specification, we do not perform any extra
checking, so you could try to use any string as a
keyword - if it does not exist in the tag nothing
bad will happen.
Here is a list of possible keywords:
TALB, TBPM, TCOM, TCON, TCOP, TDAT, TDLY, TENC,
TEXT, TFLT, TIME, TIT1, TIT2, TIT3, TKEY, TLAN,
TLEN, TMED, TOAL, TOFN, TOLY, TOPE, TORY, TOWN,
TPE1, TPE2, TPE3, TPE4, TPOS, TPUB, TRCK, TRDA,
TRSN, TRSO, TSIZ, TSRC, TSSE, TYER, TXXX
Child tags:
#
<add-data tag="TCOM"/>
<add-data tag="TENC"/>
...
Optional
If the library was able to extract the data
according to the given keyword, it will be
added to auxdata. You can then use that data
in your import scripts.
A sample configuration for the example described above
would be:
<id3>
<auxdata>
<add-data tag="TENC"/>
</auxdata>
</id3>
6.2.1. Online Content Settings
This section resides under import and defines options for
various supported online services.
<online-content fetch-buffer-size="262144" fetch-buffer-fill-size="0">
Optional
This tag defines the online content section.
Attributes:
*
fetch-buffer-size=...
Optional
Default: 262144
Often, online content can be directly accessed by the
player - we will just give it the URL. However, sometimes
it may be necessary to proxy the content through MediaTomb.
This setting defines the buffer size in bytes, that will be
used when fetching content from the web. The value must not
be less than allowed by the curl library (usually 16384
bytes).
*
fetch-buffer-fill-size=...
Optional
Default: 0 (disabled)
This setting allows to prebuffer a certain amount of data,
given in bytes, before sending it to the player, this
should ensure a constant data flow in case of slow
connections. Usually this setting is not needed, because
most players will anyway have some kind of buffering,
however if the connection is particularly slow you may want
to try enable this setting.
Below are the settings for supported services.
6.2.2. YouTube Service
MediaTomb allows you to watch YouTube videos using your UPnP
device, you can specify what content you are interested in, we
will import the meta data and present it in the database, so
you can browse the content on your player just like you do it
with your local data.
WANING:
by using this feature you may be violating the YouTube
service terms and conditions:
http://www.youtube.com/t/terms
Note:
we do not download/mirror the actual videos, we only get
description of the content and present it in the
database. The actual video is only streamed when you
press play on your device. So, when we use the term
"retrieve videos" we actually mean retrieving the video
name, description and associated meta data, not the
actual flv file.
Note:
so far we have not yet seen many devices that will
natively support the .flv format, you will need to setup
appropriate transcoding profiles to make use of the
YouTube feature.
<YouTube enabled="no" refresh="12600" update-at-start="yes" purge-after=
"1200000" racy-content="exclude">
Optional
Options and setting for YouTube service support, the attributes
are:
*
enabled=...
Optional
Default: no
Enables or disables the service, allowed values are "yes"
or "no".
*
refresh=...
Optional
Default: 28800
Refresh interval in seconds, each time the interval elapses
we will contact the YouTube server and fetch new meta data,
presenting the changes in the database view. This allows
you to stay up to date with what is available on YouTube,
you probably should not need to update more than once per
day, so specify a reasonably high value here. Setting the
option to 0 (zero) disables automatic refreshing.
*
purge-after=...
Optional
Default: 0 (disabled)
Time amount in seconds when data that has not been updated
is considered old and can be purged from the database. This
setting helps to prevent an endless filling of the database
with YouTube meta data, the idea is the following: each
video has a unique ID, during a refresh cycle the video
meta data will be imported into the database and a time
stamp will be added. Each refresh cycle we may encounter
same content (i.e. nothing changed on the YouTube site), we
will update the time stamp. However, if a particular video
is no longer available on YouTube it will not be refreshed,
once the time stamp exceeds the purge-after value we will
remove the meta data for this particular video from the
database.
*
update-at-start=...
Optional
Default: no
This option defines if we will contact the service right
after MediaTomb was started (about 10 seconds after start
up) or if data should be fetched when the first refresh
cycle kicks in. It may be useful if you frequently restart
the server and do not want the content to be updated each
time. Allowed values are "yes" or "no".
*
format=...
Optional
Default: mp4
Selects the format in which the videos should be retrieved
from YouTube.
+
mp4
A while ago YouTube also offers the videos in the mp4
format which is playable by most players, it will also
allow you to seek/pause.
+
flv
Flash video, obviously not a good choice if you want
to play it on your UPnP device, only useful in
combination with a properly set up transcoding
profile.
*
hd=...
Optional
Default: no
If set to "yes", then a HD video will be retrieved if
available.
*
racy-content=...
Optional
Default: exclude
Specifies if restricted content should be inclueded in the
search results. The option will automatically be used with
YouTube requests that support. By default restricted
content is not included.
Below are various options that allow you to define what content
you are interested in.
Note:
all tags are optional and can occur more then once.
*
<standardfeed feed="top_rated" region-id="ru" time-range="today" start-i
ndex="1" amount="all"/>
Optional
This tag tells us to retrieve one of the standard video
feeds. It can appear more than once with different options
(i.e. different feed and region settings).
+
feed=...
Required
Definition of the standard feed that you are
interested in, the allowed values are:
o
top_rated
o
top_favorites
o
most_viewed
o
most_recent
o
most_discussed
o
most_linked
o
most_responded
o
recently_featured
o
watch_on_mobile
+
region-id=...
Optional
Allows to get a standard feed for a specific region,
the option is ignored for the watch_on_mobile standard
feed.
Currently, the following region id's are supported:
o
au
Australia
o
br
Brazil
o
ca
Canada
o
fr
France
o
de
Germany
o
gb
Great Britain
o
nl
The Netherlands
o
hk
Hong Kong
o
ie
Ireland
o
it
Italy
o
jp
Japan
o
mx
Mexico
o
nz
New Zealand
o
pl
Poland
o
ru
Russia
o
kr
South Korea
o
es
Spain
o
tw
Taiwan
o
us
United States
+
time-range=...
Optional
Allows to specify a certain time range when retrieving
the feed content. The time-range option is only
supported for the following standard feeds: top_rated,
top_favorites, most_viewed, most_discussed,
most_linked and most_responded.
Following values are supported:
o
all_time
o
today
o
this_week
o
this_month
+
start-index=...
Optional
Starting index of the item in the list, useful if you
want to skip the first xxx results, must be an integer
value >= 1.
+
amount=...
Amount of items to fetch, can be either an integer
value or the keyword "all".
*
<favorites user="mediatomb"/>
Optional
Retrieves all favorites of the given user.
+
user=...
Required
Name of the YouTube user whose favorites should be
fetched.
*
<subscriptions user="mediatomb"/>
Optional
Retrieves all subscriptions of the given user.
+
user=...
Required
Name of the YouTube user whose subscriptions should be
fetched.
*
<playlists user="mediatomb"/>
Optional
Retrieve all playlists of the given user.
+
user=...
Required
Name of the YouTube user whose playlists should be
fetched.
*
<uploads user="mediatomb" start-index="1" amount="all"/>
Required
Retrieves videos that were uploaded by a specified user.
+
user=...
Required
Name of the YouTube user whose playlists should be
fetched.
+
start-index=...
Optional
Starting index of the item in the list, useful if you
want to skip the first xxx results, must be an integer
value >= 1.
+
amount=...
Amount of items to fetch, can be either an integer
value or the keyword "all".
6.3. Transcoding Settings
The transcoding section allows to define ways on how to
transcode content.
<transcoding enabled="yes" fetch-buffer-size="262144" fetch-buffer-fill-
size="0">
Optional
This tag defines the transcoding section.
Attributes:
*
enabled=...
Optional
Default: yes
This attribute defines if transcoding is enabled as a
whole, possible values are "yes" or "no".
*
fetch-buffer-size=...
Optional
Default: 262144
In case you have transcoders that can not handle online
content directly (see the accept-url parameter below), it
is possible to put the transcoder between two FIFOs, in
this case MediaTomb will fetch the online content. This
setting defines the buffer size in bytes, that will be used
when fetching content from the web. The value must not be
less than allowed by the curl library (usually 16384
bytes).
*
fetch-buffer-fill-size=...
Optional
Default: 0 (disabled)
This setting allows to prebuffer a certain amount of data
before sending it to the transcoder, this should ensure a
constant data flow in case of slow connections. Usually
this setting is not needed, because most transcoders will
just patiently wait for data and we anyway buffer on the
output end. However, we observed that ffmpeg will fail to
transcode flv files if it encounters buffer underruns -
this setting helps to avoid this situation.
Child tags:
*
<mimetype-profile-mappings>
The mime type to profile mappings define which mime type is
handled by which profile.
Different mime types can map to the same profile in case
that the transcoder in use supports various input formats.
The same mime type can also map to several profiles, in
this case multiple resources in the XML will be generated,
allowing the player to decide which one to take.
The mappings under mimetype-profile are defined in the
following manner:
+
<transcode mimetype="audio/x-flac" using="oggflac-pcm"/>
Optional
In this example we want to transcode our flac audio
files (they have the mimetype audio/x-flac) using the
"oggflac-pcm" profile which is defined below.
o
mimetype=...
Selects the mime type of the source media that
should be transcoded.
o
using=...
Selects the transcoding profile that will handle
the mime type above. Information on how to define
transcoding profiles can be found below.
*
<profiles>
This section defines the various transcoding profiles.
+
<profile name="oggflag-pcm" enabled="yes" type="external">
Optional
Definition of a transcoding profile.
o
name=...
Required
Name of the transcoding profile, this is the name
that is specified in the mime type to profile
mappings.
o
enabled=...
Required
Enables or disables the profile, allowed values
are "yes" or "no".
o
type=...
Required
Defines the profile type, currently only
"external" is supported, this will change in the
future.
o
<mimetype>audio/x-wav</mimetype>
Required
Defines the mime type of the transcoding result
(i.e. of the transcoded stream). In the above
example we transcode to PCM.
o
<accept-url>yes</accept-url>
Optional
Default: yes
Some transcoders are able to handle non local
content, i.e. instead giving a local file name
you can pass an URL to the transcoder. However,
some transcoders can only deal with local files,
for this case set the value to "no".
o
<first-resource>no</first-resource>
Optional
Default: no
It is possible to offer more than one resource in
the browse result, a good player implementation
will go through all resources and pick the one
that it can handle best. Unfortunately most
players only look at the first resource and
ignore the rest. When you add a transcoding
profile for a particular media type it will show
up as an additional resource in the browse
result, using this parameter you can make sure
that the transcoded resource appears first in the
list.
Note:
if more than one transcoding profile
is applied on one source media type
(i.e. you transcode an OGG file to MP3
and to PCM), and the first-resource
parameter is specified in both
profiles, then the resource positions
are undefined.
o
<hide-original-resource>no</hide-original-resource>
Optional
Default: no
This parameter will hide the resource of the
original media when sending the browse result to
the player, this can be useful if your device
gets confused by multiple resources and allows
you to send only the transcoded one.
o
<accept-ogg-theora>no</accept-org-theora>
Optional
Default: no
As you may know, OGG is just a container, the
content could be Vorbis or Theora while the mime
type is "application/ogg". For transcoding we
need to identify if we are dealing with audio or
video content, specifying yes in this tag in the
profile will make sure that only OGG files
containing Theora will be processed.
o
<avi-fourcc-list mode="ignore">
Optional
Default: disabled
This option allows to specify a particular list
of AVI fourcc strings that can be either set to
be ignored or processed by the profile.
Note:
this option has no effect on non AVI
content.
#
mode=...
Required
Specifies how the list should be handled by
the transcoding engine, possible values are:
@
"disabled"
The option is completely disabled,
fourcc list is not being processed.
@
"process"
Only the fourcc strings that are listed
will be processed by the transcoding
profile, AVI files with other fourcc
strings will be ignored. Setting this
is useful if you want to transcode only
some specific fourcc's and not
transcode the rest.
@
"ignore"
The fourcc strings listed will not be
transcoded, all other codecs will be
transcoded. Setting this might be
useful if you want to prevent a limited
number of codecs from being transcoded,
but want to apply transcoding on the
rest (i.e. - do not transcode divx and
xvid, but want to transcode mjpg and
whatever else might be in the AVI
container).
The list of fourcc strings is enclosed in the
avi-fourcc-list section:
#
<fourcc>XVID</fourcc>
<fourcc>DX50</fourcc>
etc...
o
<agent command="ogg123" arguments="-d wav -f %out %in/>
Required
Defines the transcoding agent and the parameters,
in the example above we use ogg123 to convert ogg
or flac to wav.
#
command=...
Required
Defines the transcoder binary that will be
executed by MediaTomb upon a transcode
request, the binary must be in $PATH. It is
very important that the transcoder is
capable of writing the output to a FIFO,
some applications, for example ffmpeg, have
problems with that. The command line
arguments are specified separately (see
below).
#
arguments=...
Required
Specifies the command line arguments that
will be given to the transcoder application
upon execution. There are two special
tokens:
%in
%out
Those tokens get substituted by the input
file name and the output FIFO name before
execution.
o
<buffer size="1048576" chunk-size="131072" fill-size="262144"/>
Required
These settings help you to achieve a smooth
playback of transcoded media. The actual values
need to be tuned and depend on the speed of your
system. The general idea is to buffer the data
before sending it out to the player, it is also
possible to delay first playback until the buffer
is filled to a certain amount. The prefill should
give you enough space to overcome some high
bitrate scenes in case your system can not
transcode them in real time.
#
size=...
Required
Size of the buffer in bytes.
#
chunk-size=...
Required
Size of chunks in bytes, that are read by
the buffer from the transcoder. Smaller
chunks will produce a more constant buffer
fill ratio, however too small chunks may
slow things down.
#
fill-size=...
Required
Initial fill size - number of bytes that
have to be in the buffer before the first
read (i.e. before sending the data to the
player for the first time). Set this to 0
(zero) if you want to disable prefilling.
o
<resolution>320x240</resolution>
Optional
Default: not specified
Allows you to tell the resolution of the
transcoded media to your player. This may be
helpful if you want to generate thumbnails for
your photos, or if your player has the ability to
pick video streams in a particular resolution. Of
course the setting should match the real
resolution of the transcoded media.
o
<use-chunked-encoding>yes</use-chunked-encoding>
Optional
Default: yes
Specifies that the content should be sent out
using chunked HTTP encoding, this is the default
setting for transcoded streams, because the
content length of the data is not known.
o
<sample-frequency>source</sample-frequency>
Optional
Default: source
Specifies the sample frequency of the transcoded
media, this information is passed to the player
and is particularly important when streaming PCM
data. Possible values are: source (automatically
set the same frequency as the frequency of the
source content, which is useful if you are not
doing any resampling), off (do not provide this
information to the player), frequency (specify a
fixed value, where frequency is a numeric value >
0)
o
<audio-channels>source</audio-channels>
Optional
Default: source
Specifies the number of audio channels in the
transcoded media, this information is passed to
the player and is particularly important when
streaming PCM data. Possible values are: source
(automatically set the same number of audio
channels as in the source content), off (do not
provide this information to the player), number
(specify a fixed value, where number is a numeric
value > 0)
o
<thumbnail>yes</thumbnail>
Optional
Default: no
Note:
this is an experimental option, the
implementation will be refined in the
future releases.
This is a special option which was added for the
PS3 users. If the resolution option (see above)
was set, then, depending on the resolution an
special DLNA tag will be added, marking the
resource as a thumbnail. This is useful if you
have a transcoding script that extracts an image
out of the video and presents it as a thumbnail.
Use the option with caution, no extra checking is
being done if the resulting mimetype represents
an image, also, it is will only work if the
output of the profile is a JPG image.
7. Supported Devices
Attention Hardware Manufacturers:
If you want to improve compatibility between MediaTomb and your
renderer device or if you are interested in a port of MediaTomb
for your NAS device please e-mail to: <contact at mediatomb dot
cc>
7.1. MediaRenderers
MediaTomb supports all UPnP compliant MediaRenderers, however
there can always be various problems that depend on the
particular device implementation. We always try to implement
workarounds to compensate for failures and limitations of
various renderers.
This is the list of client devices that MediaTomb has been
tested with and that are known to work. Please drop us a mail
if you are using MediaTomb with a device that is not in the
list, report any success and failure. We will try to fix the
issues and will add the device to the list.
7.1.1. Acer
* AT3705-MGW
7.1.2. Asus
* O!Play
7.1.3. Conceptronic
* C54WMP
7.1.4. Currys UK
* Logik IR100
7.1.5. Denon
* AVR-3808
* AVR-4306
* AVR-4308
* S-52
* ASD-3N
7.1.6. D-Link
* DSM-320
* DSM-320RD
* DSM-510
* DSM-520
Some additional settings in MediaTomb configuration are
required to enable special features for the DSM renderers. If
you have a DSM-320 and are experiencing problems during AVI
playback, add the following to the server section of your
config.xml:
<custom-http-headers>
<add header="X-User-Agent: redsonic"/>
</custom-http-headers>
Further, the DSM-320 behaves differently if it thinks that it
is dealing with the D-Link server. Add the following to the
server section of your configuration to enable srt subtitle
support:
<manufacturerURL>redsonic.com</manufacturerURL>
<modelNumber>105</modelNumber>
It is still being investigated, but we were able to get
subtitles working with a U.S. DSM-320 unit running firmware
version 1.09
Also, the DSM-510 (probably also valid for other models) will
only play avi files if the mimetype is set to video/avi, you
may want to add a mapping for that to the extension-mimetype
section in your config.xml:
<map from="avi" to="video/avi"/>
7.1.7. Freecom
* MusicPal
7.1.8. Haeger
* OnAir (also known as BT Internet Radio)
7.1.9. HP
* MediaSmart TV
Users reported that after a firmwre upgrade the device stopped
working properly. It seems that it does not sue the UPnP Browse
action anymore, but now uses the optional Search action which
is not implemented in MediaTomb.
7.1.10. Hifidelio
* Hifidelio Pro-S
7.1.11. I-O Data
* AVeL LinkPlayer2 AVLP2/DVDLA
7.1.12. JVC
* DD-3
* DD-8
7.1.13. Kathrein
* UFS922
7.1.14. Kodak
* EasyShare EX-1011
7.1.15. Linn
* Sneaky DS
7.1.16. Linksys
* WMLS11B (Wireless-B Music System)
* KiSS 1600
7.1.17. Medion
* MD 85651
7.1.18. NeoDigits
* HELIOS X3000
7.1.19. Netgear
* EVA700
* MP101
7.1.20. Nokia
* N-95
* N-800
7.1.21. Odys
* i-net MusicBox
7.1.22. Philips
* Streamium SL-300i
* Streamium SL-400i
* Streamium MX-6000i
* Streamium NP1100
* Streamium MCi900
* WAS7500
* WAK3300
* WAC3500D
* SLA-5500
* SLA-5520
* 37PFL9603D
7.1.23. Pinnacle
* ShowCenter 200
* SoundBridge
7.1.24. Pioneer
* BDP-HD50-K
* BDP-94HD
7.1.25. Raidsonic
* IB-MP308HW-B
7.1.26. Revo
* Pico RadioStation
7.1.27. Roberts
* WM201 WiFi Radio
Playing OGG audio files requres a custom mimetype, add the
following to the <extension-mimetype> section and reimport your
OGGs:
<map from="ogg" to="audio/ogg"/>
Also, add this to the <mimetype-contenttype> section:
<treat mimetype="audio/ogg" as="ogg"/>
7.1.28. Roku
* SoundBridge M1001
* SoundBridge M2000
7.1.29. Sagem
* My Dual Radio 700
7.1.30. Siemens
* Gigaset M740AV
7.1.31. SMC
* EZ Stream SMCWAA-G
7.1.32. Snazio
* Snazio* Net DVD Cinema HD SZ1350
7.1.33. Sony
* Playstation 3
Firmware 1.80 introduces UPnP/DLNA support, add the following
to the <server> section of your configuration file to enable
MediaTomb PS3 compatibility:
<protocolInfo extend="yes"/>
7.1.34. Syabas
* Popcorn Hour A110
7.1.35. T+A
* T+A Music Player
7.1.36. Tangent
* Quattro MkII
7.1.37. Telegent
* TG100
The TG100 client has a problem browsing containers, where item
titles exceed 101 characters. We implemented a server-side
workaround which allows you to limit the lengths of all titles
and descriptions. Use the following settings in the <server>
section of your configuration file:
<upnp-string-limit>101</upnp-string-limit>
7.1.38. TerraTec
* NOXON iRadio
* NOXON 2 Audio
7.1.39. Western Digital
* WD TV Live
7.1.40. Vistron
* MX-200I
7.1.41. Xtreamer
* Xtreamer
7.1.42. Yamaha
* RX-V2065
7.1.43. ZyXEL
* DMA-1000
* DMA-2500
Some users reported problems where the DMA will show an error
"Failed to retrieve list" and the DMA disconnecting from the
server. Incresing the alive interval seems to solve the problem
- add the following option to the <server> section of your
configuration file:
<alive>600</alive>
Additionally, the DMA expects that avi files are serverd with
the mime type of video/avi, so add the following to the
<extensoin-mimetype> section in your configuration file:
<map from="avi" to="video/avi"/>
Also, add this to the <mimetype-contenttype> section:
<treat mimetype="video/avi" as="avi"/>
7.2. Network Attached Storage Devices
We provide a bitbake metadata file for the OpenEmbedded
environment, it allows to easily cross compile MediaTomb for
various platforms. We have successfully tested MediaTomb on ARM
and MIPSel based devices, so it should be possible to install
and run the server on various Linux based NAS products that are
available on the market.
So far two devices are shipped with a preinstalled version of
MediaTomb, community firmware versions are available for the
rest.
7.2.1. Asus
* WL500g
Use the statically linked mips32el binary package that is
provided on our download site.
7.2.2. Buffalo
* KuroBox-HG
* LinkStation
7.2.3. Excito
* Bubba Mini Server (preinstalled)
7.2.4. Iomega
* StorCenter (preinstalled)
7.2.5. Linksys
* NSLU2
Available via Optware.
7.2.6. Maxtor
* MSS-I
Either use the Optware feeds or the statically linked mips2el
binary package that is provided on our download site.
7.2.7. Raidsonic
* IB-NAS4200-B
Use the statically linked binary armv4 package that is provided
on our download site.
7.2.8. Xtreamer
* Xtreamer eTRAYz
7.2.9. Western Digital
* MyBook
8. Running The Server
When you run MediaTomb for the first time a default
configuration will be created in the ~/.mediatomb directory. If
you are using the sqlite database no further intervention is
necessary, if you are using MySQL you will have to make some
adjustments (see Configuration section for more details). To
start the server simply run "mediatomb" from the console, to
shutdown cleanly press Ctrl-C. At start up MediaTomb will print
a link to the web UI.
Note:
Internet Explorer support is limited and not yet
finished. It is very difficult to support this browser
because of a huge number of bugs in its javascript
implementation. If you don't believe us - just visit
http://selfhtml.org/ and see how often IE is mentioned
in not following the specs or simply not working with
certain functions and features. We recommend Firefox.
If you want to run a second server from the same PC, make sure
to use a different configuration file with a different udn and
a different database.
After server launch the bookmark file is created in the
~/.mediatomb directory. You now can manually add the bookmark
~/.mediatomb/mediatomb.html in your browser. This will redirect
you to the UI if the server is running.
Assuming that you enabled the UI, you should now be able to get
around quite easily.
We also support the daemon mode which allows to start the
server in background, the --user and --group parameters should
be used to run the server under an unprivileged account. A
script for starting/stopping the server is provided.
9. Legal
THIS SOFTWARE COMES WITH ABSOLUTELY NO WARRANTY! USE AT YOUR OWN
RISK!
9.1. Copyright
Copyright (C) 2005
Gena Batyan <bgeradz at mediatomb dot cc>
Sergey Bostandzhyan <jin at mediatomb dot cc>
Copyright (C) 2006-2008
Gena Batyan <bgeradz at mediatomb dot cc>
Sergey Bostandzhyan <jin at mediatomb dot cc>
Leonhard Wimmer <leo at mediatomb dot cc>
9.2. License
MediaTomb is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
version 2 as published by the Free Software Foundation.
MediaTomb is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details. You should have
received a copy of the GNU General Public License version 2
along with MediaTomb; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
02110-1301, USA.
10. Acknowledgments
We are using the following code in our tree:
* uuid from E2fsprogs 1.35 under GNU GPL, Copyright (C) 1996,
1997, 1998 Theodore Ts'o. <tytso at mit dot edu> Some
functions from the UPnP SDK were conflicting with libuuid,
so we had to take the sources in and do some renaming.
* md5 implementation by L. Peter Deutsch <ghost at aladdin
dot com>, Copyright (c) 1999 Aladdin Enterprises. All
rights reserved. (See source headers for further details)
* md5 javascript implementation distributed under BSD
License, Copyright (c) Paul Johnston 1999 - 2002.
http://pajhome.org.uk/crypt/md5
* Prototype JavaScript Framework http://www.prototypejs.org/
(c) 2005-2007 Sam Stephenson, MIT-style license.
* (heavily modified version of) NanoTree
http://nanotree.sourceforge.net/ (c) 2003 (?) Martin
Mouritzen <martin at nano dot dk>; LGPL
* IE PNG fix from
http://webfx.eae.net/dhtml/pngbehavior/pngbehavior.html
* tombupnp is based on pupnp (http://pupnp.sf.net) which is
based on libupnp (http://upnp.sf.net), originally
distributed under the BSD license, Copyright (c) 2000-2003
Intel Corporation. Note that all changes to libupnp/pupnp
code that were made by the MediaTomb team are covered by
the LGPL license.
* ACX_PTHREAD autoconf script
http://autoconf-archive.cryp.to/acx_pthread.html (c) 2006
Steven G. Johnson <stevenj at alum dot mit dot edu>
* The the Inotify::nextEvent() function is based on code from
the inotify tools package, http://inotify-tools.sf.net/,
distributed under GPL v2, (c) Rohan McGovern <rohan at
mcgovern dot id dot au>
11. Contributions
* Initial version of the MediaTomb start up script was
contributed by Iain Lea <iain at bricbrac dot de>
* TagLib support patch was contributed by Benhur Stein
<benhur.stein at gmail dot com>
* ffmpeg metadata handler was contributed by Ingo Preiml
<ipreiml at edu dot uni-klu dot ac dot at>
* ID3 keyword extraction patch was contributed by Gabriel
Burca <gburca-mediatomb at ebixio dot com>
* tombupnp is kept in sync with the latest pupnp
(http://pupnp.sf.net/) patches, see documentation in the
tombupnp directory
* Photo layout by year/month was contributed by Aleix
Conchillo Flaque <aleix at member dot fsf dot org>
* lastfmlib patch was contributed by Dirk Vanden Boer <dirk
dot vdb at gmail dot com>
* NetBSD patches were contributed by Jared D. McNeill
<jmcneill at NetBSD dot org>