ME-Edit Activity
Brought to you by:
gumtownbassman
Activity for ME-Edit
-
ME-Edit released /ME-25-Edit/readme.txt
-
-
-
-
-
-
-
-
-
-
gumtownbassman posted a comment on discussion Open Discussion
Another new Linux version update released !!!
-
-
-
-
-
-
Just read your message now, sorry I missed it. A new Linux version has just been uploaded, please let me know if this version works better (or not).
-
-
-
-
-
-
-
-
-
-
Weverton Yuri posted a comment on discussion Help
I'm creating effects now, it's working for me
-
let me know if the editor is still working with the ME-25, I updated a midi I/O part of the code too. (no longer have a test ME-25 to use)
-
thanks
-
Hi, I do see the problem and have posted an updated Windows version with the issue fixed. Thanks for letting me know. Cheers
-
-
I can't adjust the MID parameter, just low and high. can anyone help?
-
-
-
-
-
-
-
-
Klaus Dreymann posted a comment on discussion Open Discussion
Hi, I used to use ME-25 for several years with Windows XP and later with Windows 11. But I normally work with Linux on my Computers und was surprised when I found out, that ME-25 may work under Linux. It works nearly the same way as it did with Windows but there is one thing, why I can use it: When I want to save Bulk ME-25 Patches to files, it breaks down. How can I change this? I hope you can help me. Sorry for my not so perfect English - I'm German... Good day Klaus
-
not sure if the DOREMIDI supports Boss USB, as the Boss USB is not "class compliant". The CME WIDI uHost does, but it interfaces with Bluetooth midi devices (CME Widi Master Bluetooth to 5 pin midi).
-
corbi corbi corbi modified a comment on discussion Open Discussion
Thanks! And with a DOREMIDI midi host between?
-
Thanks! And with a DOREMIDI UH10 between?
-
So long as you are connected via device which support Boss USB drivers, such as a computer with midi routing from the controller to the ME-25 USB port. another device which may work is the CME WIDI uHost, which supports Boss USB drivers, and can receive Bluetooth midi. The FCB1010 will not work directly into the ME-25 USB port as there is no USB driver working the USB ports on both devices (like plugging a computer USB keyboard directly into a Printer USB port and wondering why it won't print as...
-
Does anyone know if a controller like the behringer fcb1010 could send sisex messages to the boss to change presets?
-
Jorge Luiz posted a comment on discussion Open Discussion
thanks, it helps a lot
-
-
-
-
The only way the ME-25 communicates is with system exclusive midi, and the ME-25 only responds to a 141 byte data block of all the parameters of a patch being sent at once in one block. If you enable "deBug Mode" in the editor midi/USB preferences settings, install a midi data editor like "Bomes SendSX" and a virtual midi port like " LoopBE1"> Then set the ME-25 editor to send midi output on "LoopBE1", and "Bomes SendSX" to receive midi on the "LoopBE1" midi port, any control adjusted in the editor...
-
I'm trying to build a midi controller with an android tablet to individually control the Boss ME 25 pedals. I've already been able to establish the connection, but I can't send MIDI codes. Do you have any idea how to do this?
-
I cannot assure you 100% but I am almost certain that it cannot. Analyzing with the USBlyzer software I only got midi messages using the ME25 edit software, through the pedalboard it does not seem to emit any midi messages by itself.
-
Rene Morais posted a comment on discussion Open Discussion
Is it possible to use BOSS ME-25 as a midi controller for standalone versions like NEURAL DSP, Guitar RIG?
-
In Reaper we go to options-preferences-audio-midi devices and in Midi Outputs we mark ME25 enabled. Then we insert Track (to automate patch changes). Right click on the Volume Fader of this Track and Routing for Track-Midi Hardware Output-Me25. We inserted MIDI Item in this track. Double Clik on the MIDI item that we have just inserted. Click below, where Velocity says and we chose Sysex. Right click at the exact point where we want patch change and paste the PATCH code (without F0 and F7). We can...
-
I will try to explain it I hope you understand. I have used the ME25 EDIT software (ancient version, I do not know if the updated serves, I hope yes) and a software called BOME SENDSX. The first thing is to point the parameters of the patches that we want to create, because you have to do it manually. We open Me25Edit and put the patch parameters that we want to create (it does not serve with patches already created on our pedalboard, you have to enter it manually starting from scratch). Once this...
-
In Reaper we go to options-preferences-audio-midi devices and in Midi Outputs we mark ME25 enabled. Then we insert Track (to automate patch changes). Right click on the Volume Fader of this Track and Routing for Track-Midi Hardware Output-Me25. We inserted MIDI Item is this track. Double Clik on the MIDI item that we have just inserted. Click below, where Velocity says and we chose Sysex. Right click at the exact point where we want patch change and paste the PATCH code (without F0 and F7). We can...
-
I will try to explain it I hope I understand. I have used the ME25 EDIT software (ancient version, I do not know if the updated serves, I hope yes) and a software called BOME SENDSX. The first thing is to point the parameters of the patches that we want to create, because you have to do it manually. We open Me25Edit and put the patch parameters that we want to create (it does not serve with patches already created on our pedalboard, you have to enter it manually starting from scratch). Once this...
-
João Victor posted a comment on discussion Open Discussion
Hello guy! I would like to know how you made the midi signal work on the reaper to change patches. If so, did you use a CC Learn plugin and command? Or did you discover the values sent by ME25?
-
I know I arrive 3 years late but I have discovered how the boss me25 can be synchronized with the daw (I have used reaper). If someone is interested, I develop it well in another message because, although it is not excessively complicated, it does take a long time to explain. Sorry for my English but it's a google translation.
-
Tommy Christian posted a comment on discussion Help
Success! It sees it now. Working with it so may have some more questions later. Is there an on screen tutorial or help screen? Thanks for your help. Tommy On May 14, 2020, at 11:55 PM, gumtownbassman gumtownbassman@users.sourceforge.net wrote: From the ME-25 edit app menu "Preferences" select Midi/USB option, and in the "Midi device input" and "Midi device Output" dialog, select "ME-25" as the device to connect to. Then select OK, then from the App main page press the "CONNECT" button, it should...
-
From the ME-25 edit app menu "Preferences" select Midi/USB option, and in the "Midi device input" and "Midi device Output" dialog, select "ME-25" as the device to connect to. Then select OK, then from the App main page press the "CONNECT" button, it should remain lit green and ME-25 patch settings should populate the screen. If you are using the latest Mac Osx 10.16 ?(Catalina) then some people have had issues, as Catalina will only run with 64 bit drivers, if you upgraded from OSX 10.14 or 10.15...
-
Well, the current Boss ME 25 for mac is already installed. Any other directions to get this app seeing the me25? How does it see the boss driver? Thanks Tc Sent from my iPhone On May 14, 2020, at 7:18 PM, gumtownbassman gumtownbassman@users.sourceforge.net wrote: Hi Tommy, You will need to install the latest ME-25 USB driver from the Boss site, as the program requires that to "see" a USB or midi device from the editor "Preferences" menu Midi device settings. Welcome to Help Sent from sourceforge.net...
-
Hi Tommy, You will need to install the latest ME-25 USB driver from the Boss site, as the program requires that to "see" a USB or midi device from the editor "Preferences" menu Midi device settings.
-
loaded the program on my Mac. It looks awesome. Only issue is the program says the me-25 is not recognized. Tells me to plug it in. It is plugged in but no activity at all. What's my next step to try? Thanks
-
Phill posted a comment on discussion Help
Hello, I've tried everything but nothing works. So I give up. Mayby try it later on. Greatings, Phill Van: "Milan Marinković" mmilan@users.sourceforge.net Aan: "me-edit" 1076569@discussion.me-edit.p.re.sourceforge.net Verzonden: Dinsdag 5 mei 2020 22:38:57 Onderwerp: [me-edit:discussion] Driver installation Hey! I have a same problem. Did you manage to install it? [ https://sourceforge.net/p/me-edit/discussion/1076569/thread/ce5892fbbe/?limit=25#b5b1 | Driver installation ] Sent from sourceforge.net...
-
Milan Marinković posted a comment on discussion Help
Hey! I have a same problem. Did you manage to install it?
-
Download ME-Edit_windows-setup.exe from the site files page and run the installer https://sourceforge.net/projects/me-edit/files/ME-25-Edit/
-
Eduardo Filho posted a comment on discussion Help
Hi and thanks for sharing with us this nice software. I am trying to install it on a second computer but I didn't find the ME-25 Edit.exe file on the whole archive. Can you please help me to figure it out? Thanks a lot. Eduardo, from Brazil
-
I can't offer much more advice, the ME-Edit software is a 32 bit program which runs on both 32 and 64 bit versions of Windows 10. The driver install is something different from the editor software, Windows 10 usually installs the driver automatically via the internet from Roland/Boss, and have 32 bit and 64 bit versions of the driver. There is a Windows 10 driver file with README instructions on how to install or repair the driver, which is on the Boss website in the ME-25 section. I am no sure if...
-
I can offer any more advice, the ME-Edit software is a 32 bit program which runs on both 32 and 64 bit versions of Windows 10. The driver install is something different from the editor software, Windows 10 usually installs the driver automatically via the internet from Roland/Boss, and have 32 bit and 64 bit versions of the driver. There is a Windows 10 driver file with README instructions on how to install or repair the driver, which is on the Boss website in the ME-25 section. I am no sure if Boss...
-
Hi there, still have the same problem. Do u have a link where I can download the setup for Windows 10 64-bit? I use to have a 86-bit version on my old PC. Could that be the problem? Greatings, Phill Van: "gumtownbassman" gumtownbassman@users.sourceforge.net Aan: "[me-edit:discussion]" 1076569@discussion.me-edit.p.re.sourceforge.net Verzonden: Zaterdag 7 maart 2020 10:23:15 Onderwerp: [me-edit:discussion] Driver installation Hi Phill, Have you enabled the Windows Security settings for "Microphone"...
-
Hi Phill, Have you enabled the Windows Security settings for "Microphone" ? It seems a bit silly, but this security setting stops audio devices being accessed by software and drivers, as a security prevention to stop it from spying on you. If you Google the net on Windows security settings for Microphone, and It is mentioned on some Boss device pages.
-
I cannot install the ME-25 Editor driver on my new Windows 10 PRO. Before there where no issues with my Windows 10. It recognizes it in de taskmanager, but there is an exclamation mark next to it. See file in the attachment.
-
Hi Jose,There is not much documentation on the ME-25, the editor sysx is something I had to reverse engineer myself. If you want a memory/sysx map, look in the source code for a file labelled "midi.xml" and has the required effects mapping. CheersColin. On Tuesday, 17 December 2019, 12:06:44 AM NZDT, José Diaz josediaz@users.sourceforge.net wrote: Hello Very good program !!! I would like to make a controller in vst host (like cltrlr control panel) . Or a another way to export the me25 edit in VST...
-
José Diaz posted a comment on discussion Open Discussion
Hello Very good program !!! I would like to make a controller in vst host (like cltrlr control panel) . Or a another way to export the me25 edit in VST plugin. I tried to paste de sysx out from ME 25 midi to in Me 25 midi but no success . Perhaps someone can help me ? I need de sysx instruction to call a memory and the table of sysx to manage effects. Thanks José
-
De : jose.diaz@sfr.fr jose.diaz@sfr.fr Envoyé : lundi 16 décembre 2019 11:47 À : '1076568@discussion.me-edit.p.re.sourceforge.net' 1076568@discussion.me-edit.p.re.sourceforge.net Objet : need help Hello Very good program !!! I would like to make a controller in vst host (like cltrlr control panel) . Or a another way to export the me25 edit in VST plugin. I tried to paste de sysx out from ME 25 midi to in Me 25 midi but no success . Perhaps someone can help me ? I need de sysx instruction to call...
-
2018 update
-
Patricio Stegmann posted a comment on discussion Open Discussion
Cool, it worked fine now, detects ME-25 ... Thanks !
-
I have posted a new linux 64 version, which now runs on Kernal 5 linux (Ubuntu 19:04)
-
I see the source in the site SVN is very old, I have posted updated source in the file downloads section. To build on linux, you will also need a few extra libs, alsa, x11, and a few more. If you run the linux binary in the files download section and use "ldd ME-25-Edit" to find the dependancy libs required.
-
-
-
Hi, I'm having trouble on Linux (mint 19.04). When I click on preferences, the app crashs. Apparently there is a call to kernel/whatever to list midi devices (the me25 itself) and it crashs. I tried loading some kernel modules but dont know exactly what to do. The device is apparently being detected: (base) kpoman@ThinkPad-P50-kpoman:~$ lsusb Bus 002 Device 003: ID 0bc2:231a Seagate RSS LLC Bus 002 Device 002: ID 04e8:61b6 Samsung Electronics Co., Ltd M3 Portable Hard Drive 1TB Bus 002 Device 001:...
-
Hi Colin, thanks for the tips ! I was able to build it (had to change to "DESTDIR = /home/kpoman/me25" on the .pro file so it would compile on linux because gcc/make dont like windows characters on that path. I am having trouble connecting to the device. It is detected on linux: [324642.405100] usb 1-1: new full-speed USB device number 10 using xhci_hcd [324642.568998] usb 1-1: New USB device found, idVendor=0582, idProduct=0113 [324642.569002] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0...
-
Hi Colin, thanks for the tips ! I was able to build it (had to change to "DESTDIR = /home/kpoman/me25" on the .pro file so it would compile on linux because gcc/make dont like windows characters on that path. I am having trouble connecting to the device. It is detected on linux: [324642.405100] usb 1-1: new full-speed USB device number 10 using xhci_hcd [324642.568998] usb 1-1: New USB device found, idVendor=0582, idProduct=0113 [324642.569002] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0...
-
Hi, You will need to download and install Qt5 framework to build the ME-25-Edit, using the included "Qt Creator", open the source project in Qt Creator and select build, which the IDE will create the required make file and build an executable. Download the opensource version of Qt from https://www.qt.io/ or in Linux you could install the native version of Qt5 and Qt Creator with synaptic package manager. Cheers Colin.
-
Hello, I am trying to build from source (because binaries depend on too much stuff unavailable on Ubutnu). There are no makefiles etc. How to proceed ? Thanks !
-
Carlos Pires posted a comment on discussion Help
HI gumtownbassman,Ok ...i will try on another computerThank you gumtownbassman gumtownbassman@users.sourceforge.net escreveu no dia terça, 14/05/2019 à(s) 23:46: Hi Carlos, Your Linux operating system (Maverick 10.10) is from 2010 and is too old to run the current versions of ME-25-Edit. It might be time to upgrade your computer if it runs at CPU limit on Maverick 10.10. me25 -edit Linux https://sourceforge.net/p/me-edit/discussion/1076569/thread/54cc9ac510/?limit=25#837f/13eb/34c6/fa0d Sent from...
-
-
-
-
-
-
-
-
Hi Carlos, Your Linux operating system (Maverick 10.10) is from 2010 and is too old to run the current versions of ME-25-Edit. It might be time to upgrade your computer if it runs at CPU limit on Maverick 10.10.
-
32 bits Carlos Pires cpires@users.sourceforge.net escreveu no dia terça, 14/05/2019 à(s) 14:58: Hi. thanks in advance. i´v tried several ubuntu ….last one one ubuntu desktop Maverick 10.10. i have a cpu limitation (pae ) and 10.10 is the last i can use….that´s the problema? gumtownbassman gumtownbassman@users.sourceforge.net escreveu no dia terça, 14/05/2019 à(s) 06:13: Hi Carlos, Which version of Linux are you running?, and is it 32bit or 64bit version? me25 -edit Linux https://sourceforge.net/p/me-edit/discussion/1076569/thread/54cc9ac510/?limit=25#837f/13eb...
-
Hi. thanks in advance. i´v tried several ubuntu ….last one one ubuntu desktop Maverick 10.10. i have a cpu limitation (pae ) and 10.10 is the last i can use….that´s the problema? gumtownbassman gumtownbassman@users.sourceforge.net escreveu no dia terça, 14/05/2019 à(s) 06:13: Hi Carlos, Which version of Linux are you running?, and is it 32bit or 64bit version? me25 -edit Linux https://sourceforge.net/p/me-edit/discussion/1076569/thread/54cc9ac510/?limit=25#837f/13eb Sent from sourceforge.net because...
-
Hi Carlos, Which version of Linux are you running?, and is it 32bit or 64bit version?
1 >
