[Mcu8051ide-support] How can I add my own MCU to data?

[JIA P. <jp...@gm...>]

Hi, to whom it may concern:


Thank you very much for such a brilliant work. It's fabulous !!!
However, since I'm using some other MCU, instead of Atmel MCU, I'm trying
to add the profile for such a MCU to this mcu8051ide.

Environment:
OS: Ubuntu 12.10
mcu8051ide: 1.3.7-1



The MCU I'm using is *STC90C516RD+ 40I-PDIP40*, in short, *STC90C516* .
What I've done so far is:
Modify /usr/share/mcu8051ide/data/mcus.xml , and add a final *<MCU>
</MCU>*before the final line
*</mcus>*
The profile about this specific MCU is as follows:
*<mcu*
* vendor="STC" name="STC90C516"*
* xdata="yes" xcode="yes"*
* code="64" frequency="0 to 80 MHz"*
* ram="1280" portbits="32"*
* uart="yes" interrupts="8"*
* voltage="max. 6.6 V" timer2="yes"*
* watchdog="yes" eram="0"*
* dualdtpr="no" auxr="no"*
* t2mod="yes" port0="11111111"*
* port1="11111111" port2="11111111"*
* port3="11111111" port4=""*
* pof="no" gf0="yes"*
* gf1="yes" pd="yes"*
* idl="yes" smod0="no"*
* iph="no" acomparator="no"*
* euart="no" clkreg="no"*
* pwdex="no" spi="no"*
* wdtcon="no" eeprom="0"*
* intelpe="no" pwm="no"*
* x2reset="no" ckcon="no"*
* auxr1gf3="no" ao="no"*
* wdtprg="no" hddptr="no"*
* auxrwdidle="no" auxrdisrto="no">*
* <timers>Three 16-bit</timers>*
* <more>*
* Three-level Program Memory Lock*
* Low-power Idle and Power-down Modes*
* </more><bits>*
* C903 B83F A8BF 878F*
* </bits><writeonly>*
* </writeonly><sfr>*
* P0 P1 P2 P3 SBUF ES PS ET2 PT2*
* T2MOD RCAP2L RCAP2H TL2 TH2*
* SCON SM0 SM1 SM2 REN TB8 RB8 TI RI*
* T2CON TF2 EXF2 RCLK TCLK EXEN2 TR2 CT2 CPRL2*
* </sfr>*
* </mcu>*


In the above profile, the *bold* words are the info that I can find from
the manual of this *MCU*. The other parts(unbold), I just keep the same
values as those of *89C52* .



However, when I tried to *new* a *project* from the IDE, I obtained the
following error message:

*FATAL ERROR*
*
*
*MCUs database file is corrupted,*
*this program cannot run without it.*
*Please reinstall MCU 8051 IDE.*



My question is as the title: Is there a way for me to add my own MCU
profile for this mcu8051ide tool???


Thank you very much.


Best Regards

-- 

Pei JIA

Email: jp...@gm...
cell:    +1 604-362-5816

Welcome to Vision Open
http://www.visionopen.com