matsim-users — Announcements to users that do not write code, but only use configuration files.

[Matsim-users] Fw:Matsim Questions

[yuliangwhu <yul...@16...>]

Dear Matsim Users:
   
         I am interested in Matsim and I have studied it since the tutorial ended in Shanghai. However, there are some questions as follows to ask you.


         Fisrt, I still cannot understand the two parameters named "StorageCapacityFactor" and "FlowCapacityFactor" despite the tutors have interpreted it at the class. I mean when we need to change the two parameters' value and 


why we do not change the corresponding parameters' value like "Capacity" in the links of network config file. 


        Second, the Matsim introduces the marginal utility to calculate the plan score. For example, it uses logit model to describe the marginal model of activites, that is with the increase of activity time, the growth of activity 


utility tend to be slower and slower. However, the Matsim uses linear function to describe the disutility of travel activities. I think it is impractical because as the travel distance or time is increased, the growth of disutility should be


faster and faster.  After all, nobody likes a long travel.


         Third, in the planCalcScore module of full config file, there is a type attribute named  "scoringParameters". There are some parameters in this attrbute such as earlyDeparture, lateArrival (<param name="earlyDeparture" 


value="-0.0" />, <param name="lateArrival" value="-18.0" />). However, Why I cannot find  the "shortDuration" (<param name="shortDuration" value="0.0" />)? Is it permitted to add some other parameters in the full config file? If 


so, how to add them?


        I am looking forward your early reply. Thank you!


        Best Wishes!


        Xi Yuliang










         




 

[Matsim-users] simulation output of public transport

[Zahra N. <z.n...@st...>]

Dear all,

My question is regarding the simulation output of public transport. In
version 6 events file, there were items such as "transit_walk" mode and
"startwaitingforpt" event that let me calculate the walking time to the
station and waiting time for the transit, however, I don't have such items
when I run transit simulation with version 7. Is there any way to get them
in version 7 or should I just use the old version? thank you very much.

kind regards,
Zahra

*--------------------------------------------------------------------------*

*Zahra Navidi*

PhD Candidate

Geomatics Discipline

Department of Infrastructure Engineering

The University of Melbourne

Victoria, 3010

Department: http://www.ie.unimelb.edu.au

Project: http://imod-au.info/

Re: [Matsim-users] Population Generator

[Saba D. <sab...@gm...>]

Yes I finally ran it today!

Thank you dear Thibaut.

On Thu, Jul 7, 2016 at 12:10 PM, Thibaut Dubernet <
thi...@gm...> wrote:

> Dear Saba,
>
> Scenario.createId() is a method from a pretty old version of MATSim. In
> newest versions, you want to use Id.createPersonId() instead.
>
> It seems you based your code on an old example from the Web. I would
> advise to use examples from the tutorial.programming package in the MATSim
> source code, which allows to make sure that the syntax is consistent with
> the method you use. How to find those examples differ depending on how you
> "installed" MATSim: please ask back if you cannot find them.
>
> Hope this helps,
>
> Thibaut
>
> Le 06. 07. 16 à 22:34, Saba Daftari a écrit :
>
> Dear MATSim users,
>
>
> I am trying to generate a population file but this error (The method
> createId(String) is undefined for the type Scenario) comes out on this line:
>
> Person person = populationFactory.createPerson(sc.createId("1"));
>
> Could anyone help me out with this error?
>
> The full code:
>
>
> package myProject;
>
> import java.util.ArrayList;
>
> import java.util.List;
>
> import java.util.Map;
>
> import java.util.TreeMap;
>
>
>
> import org.matsim.api.core.v01.Coord;
>
> import org.matsim.api.core.v01.Id;
>
> import org.matsim.api.core.v01.Scenario;
>
> import org.matsim.api.core.v01.network.Network;
>
> import org.matsim.api.core.v01.population.Activity;
>
> import org.matsim.api.core.v01.population.Person;
>
> import org.matsim.api.core.v01.population.Plan;
>
> import org.matsim.api.core.v01.population.Population;
>
> import org.matsim.api.core.v01.population.PopulationFactory;
>
> import org.matsim.core.api.internal.MatsimWriter;
>
> import org.matsim.core.config.Config;
>
> import org.matsim.core.config.ConfigUtils;
>
> import org.matsim.core.scenario.ScenarioUtils;
>
> import org.matsim.core.utils.geometry.CoordinateTransformation;
>
> import
> org.matsim.core.utils.geometry.transformations.TransformationFactory;
>
>
> /**
>
>  *
>
>  * Creates a sample Population of one Person and writes it to a file.
>
>  *
>
>  *
>
>  *
>
>  */
>
> public class POnePersonPopulationGenerator {
>
>
> public static void main(String[] args) {
>
> /*
>
> * We enter coordinates in the WGS84 reference system, but we want them to
> appear in the population file
>
> * projected to UTM33N, because we also generated the network that way.
>
> */
>
> CoordinateTransformation ct =
>
> TransformationFactory.getCoordinateTransformation(TransformationFactory.
> WGS84, TransformationFactory.WGS84_UTM33N);
>
> /*
>
> * First, create a new Config and a new Scenario.
>
> */
>
> Config config = ConfigUtils.createConfig();
>
> Scenario sc = ScenarioUtils.createScenario(config);
>
>
> /*
>
> * Pick the Network and the Population out of the Scenario for convenience.
>
> */
>
> Network network = sc.getNetwork();
>
> Population population = sc.getPopulation();
>
>
> /*
>
> * Pick the PopulationFactory out of the Population for convenience.
>
> * It contains methods to create new Population items.
>
> */
>
> PopulationFactory populationFactory = population.getFactory();
>
> /*
>
> * Create a Person designated "1" and add it to the Population.
>
> */
>
> Person person = populationFactory.createPerson(sc.createId("1"));
>
> population.addPerson(person);
>
>
> /*
>
> * Create a Plan for the Person
>
> */
>
> Plan plan = populationFactory.createPlan();
>
> /*
>
> * Create a "home" Activity for the Person. In order to have the Person end
> its day at the same location,
>
> * we keep the home coordinates for later use (see below).
>
> * Note that we use the CoordinateTransformation created above.
>
> */
>
> Coord homeCoordinates = sc.createCoord(51.388974, 35.689197);
>
> Activity activity1 = populationFactory.createActivityFromCoord("home", ct
> .transform(homeCoordinates));
>
> activity1.setEndTime(21600); // leave at 6 o'clock
>
> plan.addActivity(activity1); // add the Activity to the Plan
>
> /*
>
> * Create a Leg. A Leg initially hasn't got many attributes. It just says
> that a car will be used.
>
> */
>
> plan.addLeg(populationFactory.createLeg("car"));
>
> /*
>
> * Create a "work" Activity, at a different location.
>
> */
>
> Activity activity2 = populationFactory.createActivityFromCoord("work", ct
> .transform(sc.createCoord(51.388974, 35.689197)));
>
> activity2.setEndTime(57600); // leave at 4 p.m.
>
> plan.addActivity(activity2);
>
> /*
>
> * Create another car Leg.
>
> */
>
> plan.addLeg(populationFactory.createLeg("car"));
>
> /*
>
> * End the day with another Activity at home. Note that it gets the same
> coordinates as the first activity.
>
> */
>
> Activity activity3 = populationFactory.createActivityFromCoord("home", ct
> .transform(homeCoordinates));
>
> plan.addActivity(activity3);
>
> person.addPlan(plan);
>
>
> /*
>
> * Write the population (of 1 Person) to a file.
>
> */
>
> MatsimWriter popWriter = new
> org.matsim.api.core.v01.population.PopulationWriter(population, network);
>
> popWriter.write("./input/population.xml");
>
> }
>
> }
>
>
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.http://sdm.link/attshape
>
>
>
> _______________________________________________
> Matsim-users mailing lis...@li...https://lists.sourceforge.net/lists/listinfo/matsim-users
>
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
> _______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users
>
>

Re: [Matsim-users] Order of simulated activities

[Sashikanth G. <sg...@ma...>]

Thanks for the information, Dr. Nagel and Thibaut.

On Thu, Jul 7, 2016 at 3:40 AM, Nagel, Kai, Prof. Dr. <
na...@vs...> wrote:

> Something else: MATSim does not "re-sort" the activities; instead, it
> executes them in the sequence given in the plans file.  So if daysim maybe
> gives them out in arbitrary sequence, you will have to order them before
> you insert them into MATSim.  Best, Kai
>
> On 07 Jul 2016, at 09:33, Thibaut Dubernet <thi...@us...>
> wrote:
>
> Dear Sashikanth,
>
> what you describe is a feature: an agent will stay at its last activity
> "forever". MATSim does not try to guess what is the "home" of agents and
> whether they should go back there at night or not.
>
> To solve your problem, add a "home" activity at the end of your day,
> without end time (and a trip from shop to home, of course).
>
> Please also be aware that start times are not used for simulation.
> Activities start when the agent arrives, which might differ from
> expectations due to congestion.
>
> Thibaut
>
> Le 06. 07. 16 à 18:55, Sashikanth Gurram a écrit :
>
> Dear All,
>
> I have recently come across an issue with MATSim simulation. I am using a
> DaySim based ABM modeling system to generate my initial set of plans. In
> some cases, DaySim produces activity plans which spend zero time at their
> activity location. For example, for a person in my data, the start time of
> the activity is 19:07 and the end time of the activity is also 19:07. In
> such a case, MATSim simulates this activity at the end of the simulation
> day. Is there a reason for this behavior? Please look at MATSim' s output
> below. The shopping activity starting at 19:07 is simulated at the end of
> all other activities. Ideally, this activity should be simulated before the
> home activity which starts at 19:10
>
> <Mail Attachment.png>
> .............................
> .............................
> <act type="home" link="19278" x="367830.771442" y="3191298.07437"
> start_time="15:25:00" end_time="17:10:00" />
> <leg mode="car" dep_time="17:10:00" trav_time="00:02:27"
> arr_time="17:12:27">
> <route type="links">19278 19275 19283 19293</route>
> </leg>
> <act type="pers.bus" link="19293" x="369317.147491" y="3190504.43789"
> start_time="17:13:00" end_time="19:07:00" />
> <leg mode="car" dep_time="19:07:00" trav_time="00:02:17"
> arr_time="19:09:17">
> <route type="links">19293 19294 19284 19276 19277 19278</route>
> </leg>
> <act type="home" link="19278" x="367830.771442" y="3191298.07437"
> start_time="19:10:00" end_time="26:59:00" />
> <leg mode="car" dep_time="26:59:00" trav_time="00:01:19"
> arr_time="27:00:19">
> <route type="links">19278 19275 19283 19293 19314</route>
> </leg>
> <act type="shop" link="19314" x="369351.58378" y="3190504.14796"
> start_time="19:07:00" end_time="19:07:00" />
> </plan>
>
>
>
> --
> Sashikanth Gurram
> PhD Candidate
> Civil and Environmental Engineering
> University of South Florida
> Ph: 831-229-7399
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.http://sdm.link/attshape
>
>
>
> _______________________________________________
> Matsim-users mailing lis...@li...https://lists.sourceforge.net/lists/listinfo/matsim-users
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape_______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users
>
>
> -----------------------------
> www.vsp.tu-berlin.de
> fax: +49-30-314-26269; fon: +49-30-314-23308
> TU Berlin Sek SG12; Salzufer 17-19; 10587 Berlin; Germany
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
> _______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users
>
>


-- 
Sashikanth Gurram
PhD Candidate
Civil and Environmental Engineering
University of South Florida
Ph: 831-229-7399

Re: [Matsim-users] Order of simulated activities

[Nagel, K. P. Dr. <na...@vs...>]

Something else: MATSim does not "re-sort" the activities; instead, it executes them in the sequence given in the plans file.  So if daysim maybe gives them out in arbitrary sequence, you will have to order them before you insert them into MATSim.  Best, Kai

On 07 Jul 2016, at 09:33, Thibaut Dubernet <thi...@us...<mailto:thi...@us...>> wrote:

Dear Sashikanth,

what you describe is a feature: an agent will stay at its last activity "forever". MATSim does not try to guess what is the "home" of agents and whether they should go back there at night or not.

To solve your problem, add a "home" activity at the end of your day, without end time (and a trip from shop to home, of course).

Please also be aware that start times are not used for simulation. Activities start when the agent arrives, which might differ from expectations due to congestion.

Thibaut

Le 06. 07. 16 à 18:55, Sashikanth Gurram a écrit :
Dear All,

I have recently come across an issue with MATSim simulation. I am using a DaySim based ABM modeling system to generate my initial set of plans. In some cases, DaySim produces activity plans which spend zero time at their activity location. For example, for a person in my data, the start time of the activity is 19:07 and the end time of the activity is also 19:07. In such a case, MATSim simulates this activity at the end of the simulation day. Is there a reason for this behavior? Please look at MATSim' s output below. The shopping activity starting at 19:07 is simulated at the end of all other activities. Ideally, this activity should be simulated before the home activity which starts at 19:10

<Mail Attachment.png>
.............................
.............................
<act type="home" link="19278" x="367830.771442" y="3191298.07437" start_time="15:25:00" end_time="17:10:00" />
<leg mode="car" dep_time="17:10:00" trav_time="00:02:27" arr_time="17:12:27">
<route type="links">19278 19275 19283 19293</route>
</leg>
<act type="pers.bus" link="19293" x="369317.147491" y="3190504.43789" start_time="17:13:00" end_time="19:07:00" />
<leg mode="car" dep_time="19:07:00" trav_time="00:02:17" arr_time="19:09:17">
<route type="links">19293 19294 19284 19276 19277 19278</route>
</leg>
<act type="home" link="19278" x="367830.771442" y="3191298.07437" start_time="19:10:00" end_time="26:59:00" />
<leg mode="car" dep_time="26:59:00" trav_time="00:01:19" arr_time="27:00:19">
<route type="links">19278 19275 19283 19293 19314</route>
</leg>
<act type="shop" link="19314" x="369351.58378" y="3190504.14796" start_time="19:07:00" end_time="19:07:00" />
</plan>



--
Sashikanth Gurram
PhD Candidate
Civil and Environmental Engineering
University of South Florida
Ph: 831-229-7399



------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape



_______________________________________________
Matsim-users mailing list
Mat...@li...<mailto:Mat...@li...>
https://lists.sourceforge.net/lists/listinfo/matsim-users



------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape_______________________________________________
Matsim-users mailing list
Mat...@li...
https://lists.sourceforge.net/lists/listinfo/matsim-users

-----------------------------
www.vsp.tu-berlin.de<http://www.vsp.tu-berlin.de>
fax: +49-30-314-26269; fon: +49-30-314-23308
TU Berlin Sek SG12; Salzufer 17-19; 10587 Berlin; Germany

Re: [Matsim-users] Population Generator

[Thibaut D. <thi...@gm...>]

Dear Saba,

Scenario.createId() is a method from a pretty old version of MATSim. In 
newest versions, you want to use Id.createPersonId() instead.

It seems you based your code on an old example from the Web. I would 
advise to use examples from the tutorial.programming package in the 
MATSim source code, which allows to make sure that the syntax is 
consistent with the method you use. How to find those examples differ 
depending on how you "installed" MATSim: please ask back if you cannot 
find them.

Hope this helps,

Thibaut

Le 06. 07. 16 à 22:34, Saba Daftari a écrit :
>
> Dear MATSim users,
>
>
> I am trying to generate a population file but this error (The method 
> createId(String) is undefined for the type Scenario) comes out on this 
> line:
>
> Person person = populationFactory.createPerson(sc.createId("1"));
>
> Could anyone help me out with this error?
>
> The full code:
>
>
>     package myProject;
>
>     import java.util.ArrayList;
>
>     import java.util.List;
>
>     import java.util.Map;
>
>     import java.util.TreeMap;
>
>
>
>     import org.matsim.api.core.v01.Coord;
>
>     import org.matsim.api.core.v01.Id <http://org.matsim.api.core.v01.Id>;
>
>     import org.matsim.api.core.v01.Scenario;
>
>     import org.matsim.api.core.v01.network.Network;
>
>     import org.matsim.api.core.v01.population.Activity;
>
>     import org.matsim.api.core.v01.population.Person;
>
>     import org.matsim.api.core.v01.population.Plan;
>
>     import org.matsim.api.core.v01.population.Population;
>
>     import org.matsim.api.core.v01.population.PopulationFactory;
>
>     import org.matsim.core.api.internal.MatsimWriter;
>
>     import org.matsim.core.config.Config;
>
>     import org.matsim.core.config.ConfigUtils;
>
>     import org.matsim.core.scenario.ScenarioUtils;
>
>     import org.matsim.core.utils.geometry.CoordinateTransformation;
>
>     import
>     org.matsim.core.utils.geometry.transformations.TransformationFactory;
>
>
>     /**
>
>      *
>
>      * Creates a sample Population of one Person and writes it to a file.
>
>      *
>
>      *
>
>      *
>
>      */
>
>     public class POnePersonPopulationGenerator {
>
>
>     public static void main(String[] args) {
>
>     /*
>
>     * We enter coordinates in the WGS84 reference system, but we want
>     them to appear in the population file
>
>     * projected to UTM33N, because we also generated the network that way.
>
>     */
>
>     CoordinateTransformation ct =
>
>     TransformationFactory.getCoordinateTransformation(TransformationFactory.WGS84,
>     TransformationFactory.WGS84_UTM33N);
>
>     /*
>
>     * First, create a new Config and a new Scenario.
>
>     */
>
>     Config config = ConfigUtils.createConfig();
>
>     Scenario sc = ScenarioUtils.createScenario(config);
>
>
>     /*
>
>     * Pick the Network and the Population out of the Scenario for
>     convenience.
>
>     */
>
>     Network network = sc.getNetwork();
>
>     Population population = sc.getPopulation();
>
>
>     /*
>
>     * Pick the PopulationFactory out of the Population for convenience.
>
>     * It contains methods to create new Population items.
>
>     */
>
>     PopulationFactory populationFactory = population.getFactory();
>
>     /*
>
>     * Create a Person designated "1" and add it to the Population.
>
>     */
>
>     Person person = populationFactory.createPerson(sc.createId("1"));
>
>     population.addPerson(person);
>
>
>     /*
>
>     * Create a Plan for the Person
>
>     */
>
>     Plan plan = populationFactory.createPlan();
>
>     /*
>
>     * Create a "home" Activity for the Person. In order to have the
>     Person end its day at the same location,
>
>     * we keep the home coordinates for later use (see below).
>
>     * Note that we use the CoordinateTransformation created above.
>
>     */
>
>     Coord homeCoordinates = sc.createCoord(51.388974, 35.689197);
>
>     Activity activity1 =
>     populationFactory.createActivityFromCoord("home",
>     ct.transform(homeCoordinates));
>
>     activity1.setEndTime(21600); // leave at 6 o'clock
>
>     plan.addActivity(activity1); // add the Activity to the Plan
>
>     /*
>
>     * Create a Leg. A Leg initially hasn't got many attributes. It
>     just says that a car will be used.
>
>     */
>
>     plan.addLeg(populationFactory.createLeg("car"));
>
>     /*
>
>     * Create a "work" Activity, at a different location.
>
>     */
>
>     Activity activity2 =
>     populationFactory.createActivityFromCoord("work",
>     ct.transform(sc.createCoord(51.388974, 35.689197)));
>
>     activity2.setEndTime(57600); // leave at 4 p.m.
>
>     plan.addActivity(activity2);
>
>     /*
>
>     * Create another car Leg.
>
>     */
>
>     plan.addLeg(populationFactory.createLeg("car"));
>
>     /*
>
>     * End the day with another Activity at home. Note that it gets the
>     same coordinates as the first activity.
>
>     */
>
>     Activity activity3 =
>     populationFactory.createActivityFromCoord("home",
>     ct.transform(homeCoordinates));
>
>     plan.addActivity(activity3);
>
>     person.addPlan(plan);
>
>
>     /*
>
>     * Write the population (of 1 Person) to a file.
>
>     */
>
>     MatsimWriter popWriter = new
>     org.matsim.api.core.v01.population.PopulationWriter(population,
>     network);
>
>     popWriter.write("./input/population.xml");
>
>     }
>
>     }
>
>
>
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
>
>
> _______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users

Re: [Matsim-users] Order of simulated activities

[Thibaut D. <thi...@us...>]

Dear Sashikanth,

what you describe is a feature: an agent will stay at its last activity 
"forever". MATSim does not try to guess what is the "home" of agents and 
whether they should go back there at night or not.

To solve your problem, add a "home" activity at the end of your day, 
without end time (and a trip from shop to home, of course).

Please also be aware that start times are not used for simulation. 
Activities start when the agent arrives, which might differ from 
expectations due to congestion.

Thibaut

Le 06. 07. 16 à 18:55, Sashikanth Gurram a écrit :
> Dear All,
>
> I have recently come across an issue with MATSim simulation. I am 
> using a DaySim based ABM modeling system to generate my initial set of 
> plans. In some cases, DaySim produces activity plans which spend zero 
> time at their activity location. For example, for a person in my data, 
> the start time of the activity is 19:07 and the end time of the 
> activity is also 19:07. In such a case, MATSim simulates this activity 
> at the end of the simulation day. Is there a reason for this behavior? 
> Please look at MATSim' s output below. The shopping activity starting 
> at 19:07 is simulated at the end of all other activities. Ideally, 
> this activity should be simulated before the home activity which 
> starts at 19:10
>
> Inline image 1
> .............................
> .............................
> <act type="home" link="19278" x="367830.771442" y="3191298.07437" 
> start_time="15:25:00" end_time="17:10:00" />
> <leg mode="car" dep_time="17:10:00" trav_time="00:02:27" 
> arr_time="17:12:27">
> <route type="links">19278 19275 19283 19293</route>
> </leg>
> <act type="pers.bus" link="19293" x="369317.147491" y="3190504.43789" 
> start_time="17:13:00" end_time="19:07:00" />
> <leg mode="car" dep_time="19:07:00" trav_time="00:02:17" 
> arr_time="19:09:17">
> <route type="links">19293 19294 19284 19276 19277 19278</route>
> </leg>
> <act type="home" link="19278" x="367830.771442" y="3191298.07437" 
> start_time="19:10:00" end_time="26:59:00" />
> <leg mode="car" dep_time="26:59:00" trav_time="00:01:19" 
> arr_time="27:00:19">
> <route type="links">19278 19275 19283 19293 19314</route>
> </leg>
> <act type="shop" link="19314" x="369351.58378" y="3190504.14796" 
> start_time="19:07:00" end_time="19:07:00" />
> </plan>
>
>
>
> -- 
> Sashikanth Gurram
> PhD Candidate
> Civil and Environmental Engineering
> University of South Florida
> Ph: 831-229-7399
>
>
> ------------------------------------------------------------------------------
> Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
> Francisco, CA to explore cutting-edge tech and listen to tech luminaries
> present their vision of the future. This family event has something for
> everyone, including kids. Get more information and register today.
> http://sdm.link/attshape
>
>
> _______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users

[Matsim-users] Population Generator

[Saba D. <sab...@gm...>]

Dear MATSim users,


I am trying to generate a population file but this error (The method
createId(String) is undefined for the type Scenario) comes out on this line:

Person person = populationFactory.createPerson(sc.createId("1"));

Could anyone help me out with this error?

The full code:


package myProject;

import java.util.ArrayList;

import java.util.List;

import java.util.Map;

import java.util.TreeMap;



import org.matsim.api.core.v01.Coord;

import org.matsim.api.core.v01.Id;

import org.matsim.api.core.v01.Scenario;

import org.matsim.api.core.v01.network.Network;

import org.matsim.api.core.v01.population.Activity;

import org.matsim.api.core.v01.population.Person;

import org.matsim.api.core.v01.population.Plan;

import org.matsim.api.core.v01.population.Population;

import org.matsim.api.core.v01.population.PopulationFactory;

import org.matsim.core.api.internal.MatsimWriter;

import org.matsim.core.config.Config;

import org.matsim.core.config.ConfigUtils;

import org.matsim.core.scenario.ScenarioUtils;

import org.matsim.core.utils.geometry.CoordinateTransformation;

import org.matsim.core.utils.geometry.transformations.TransformationFactory;


/**

 *

 * Creates a sample Population of one Person and writes it to a file.

 *

 *

 *

 */

public class POnePersonPopulationGenerator {


public static void main(String[] args) {

/*

* We enter coordinates in the WGS84 reference system, but we want them to
appear in the population file

* projected to UTM33N, because we also generated the network that way.

*/

CoordinateTransformation ct =

TransformationFactory.getCoordinateTransformation(TransformationFactory.
WGS84, TransformationFactory.WGS84_UTM33N);

/*

* First, create a new Config and a new Scenario.

*/

Config config = ConfigUtils.createConfig();

Scenario sc = ScenarioUtils.createScenario(config);


/*

* Pick the Network and the Population out of the Scenario for convenience.

*/

Network network = sc.getNetwork();

Population population = sc.getPopulation();


/*

* Pick the PopulationFactory out of the Population for convenience.

* It contains methods to create new Population items.

*/

PopulationFactory populationFactory = population.getFactory();

/*

* Create a Person designated "1" and add it to the Population.

*/

Person person = populationFactory.createPerson(sc.createId("1"));

population.addPerson(person);


/*

* Create a Plan for the Person

*/

Plan plan = populationFactory.createPlan();

/*

* Create a "home" Activity for the Person. In order to have the Person end
its day at the same location,

* we keep the home coordinates for later use (see below).

* Note that we use the CoordinateTransformation created above.

*/

Coord homeCoordinates = sc.createCoord(51.388974, 35.689197);

Activity activity1 = populationFactory.createActivityFromCoord("home", ct
.transform(homeCoordinates));

activity1.setEndTime(21600); // leave at 6 o'clock

plan.addActivity(activity1); // add the Activity to the Plan

/*

* Create a Leg. A Leg initially hasn't got many attributes. It just says
that a car will be used.

*/

plan.addLeg(populationFactory.createLeg("car"));

/*

* Create a "work" Activity, at a different location.

*/

Activity activity2 = populationFactory.createActivityFromCoord("work", ct
.transform(sc.createCoord(51.388974, 35.689197)));

activity2.setEndTime(57600); // leave at 4 p.m.

plan.addActivity(activity2);

/*

* Create another car Leg.

*/

plan.addLeg(populationFactory.createLeg("car"));

/*

* End the day with another Activity at home. Note that it gets the same
coordinates as the first activity.

*/

Activity activity3 = populationFactory.createActivityFromCoord("home", ct
.transform(homeCoordinates));

plan.addActivity(activity3);

person.addPlan(plan);


/*

* Write the population (of 1 Person) to a file.

*/

MatsimWriter popWriter = new
org.matsim.api.core.v01.population.PopulationWriter(population, network);

popWriter.write("./input/population.xml");

}

}

[Matsim-users] Order of simulated activities

[Sashikanth G. <sg...@ma...>]

Dear All,

I have recently come across an issue with MATSim simulation. I am using a
DaySim based ABM modeling system to generate my initial set of plans. In
some cases, DaySim produces activity plans which spend zero time at their
activity location. For example, for a person in my data, the start time of
the activity is 19:07 and the end time of the activity is also 19:07. In
such a case, MATSim simulates this activity at the end of the simulation
day. Is there a reason for this behavior? Please look at MATSim' s output
below. The shopping activity starting at 19:07 is simulated at the end of
all other activities. Ideally, this activity should be simulated before the
home activity which starts at 19:10

[image: Inline image 1]
.............................
.............................
<act type="home" link="19278" x="367830.771442" y="3191298.07437"
start_time="15:25:00" end_time="17:10:00" />
<leg mode="car" dep_time="17:10:00" trav_time="00:02:27"
arr_time="17:12:27">
<route type="links">19278 19275 19283 19293</route>
</leg>
<act type="pers.bus" link="19293" x="369317.147491" y="3190504.43789"
start_time="17:13:00" end_time="19:07:00" />
<leg mode="car" dep_time="19:07:00" trav_time="00:02:17"
arr_time="19:09:17">
<route type="links">19293 19294 19284 19276 19277 19278</route>
</leg>
<act type="home" link="19278" x="367830.771442" y="3191298.07437"
start_time="19:10:00" end_time="26:59:00" />
<leg mode="car" dep_time="26:59:00" trav_time="00:01:19"
arr_time="27:00:19">
<route type="links">19278 19275 19283 19293 19314</route>
</leg>
<act type="shop" link="19314" x="369351.58378" y="3190504.14796"
start_time="19:07:00" end_time="19:07:00" />
</plan>



-- 
Sashikanth Gurram
PhD Candidate
Civil and Environmental Engineering
University of South Florida
Ph: 831-229-7399

[Matsim-users] MATSim report --> May-June Report is online!

[Ciari F. <ci...@iv...>]

------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape

[Matsim-users] FW: MATSim report --> March-April Report is online!

[Ciari F. <ci...@iv...>]

Dear all,

The MATSim Monthly Report for May-June 2016 is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+May-June

Thanks a lot for all your contributions!

I'll get back in touch the last week of August for a new update.

Best,
Francesco


From: Ciari Francesco
Sent: Dienstag, 3. Mai 2016 17:30
To: 'mat...@li...'; 'Matsim Developers'
Subject: MATSim report --> March-April Report is online!

Dear All,

The MATSim Monthly Report for March-April 2016 is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+March-April

Thanks a lot for all your contributions!

I'll get back in touch the last week of June for a new update.

Best,
Francesco


From: Ciari Francesco
Sent: Dienstag, 8. März 2016 22:16
To: 'mat...@li...'; 'Matsim Developers'
Cc: 'Gunnar Flötteröd'
Subject: RE: MATSim report --> Request for contributions

Dear All,

The MATSim Monthly Report for January-February 2016 is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+January-February

Thanks a lot for all your contributions!

I'll get back in touch the last week of April for a new update.

Best,
Francesco


From: Ciari Francesco
Sent: Freitag, 4. Dezember 2015 15:35
To: 'mat...@li...'; 'Matsim Developers'
Cc: 'Gunnar Flötteröd'
Subject: MATSim report --> Request for contributions

Dear all,

You might have wonder why the request did not come earlier. Indeed, I thought it was not a good option to have an October-November report followed by a December-January one. The latter would have been  an odd time span for the report, from a calendar standpoint and, most importantly, from a work standpoint (given upcoming holidays and TRB). So, I decided to stretch the current report over three months and go for a fresh start (and back to the two months rhythm) in 2016.

All this means that I'm kindly asking you to send me your contributions until December 11th.

Thanks a lot!

Best,
Francesco

From: Ciari Francesco
Sent: Freitag, 25. September 2015 13:31
To: 'mat...@li...'; 'Matsim Developers'
Cc: 'Gunnar Flötteröd'
Subject: RE: MATSim monthly report --> Request for contributions

Dear MATSim Users and Developers,

I'm kindly asking you to send your contributions to me for the new Monthly Report.
It would be great to have it until the end of the next week (October 2nd).

As with this edition we are completing the first year of MATSim reports, I'd like to take this as an opportunity to ask you a short feedback: Do you find it useful? (for some perhaps the question should be: did you ever had a look at it?) Do you have any suggestion to improve it?

Thanks a lot!

Best,
Francesco


From: Ciari Francesco
Sent: Freitag, 10. April 2015 13:30
To: 'mat...@li...'; 'Matsim Developers'
Cc: Gunnar Flötteröd
Subject: MATSim monthly report --> March report is online!

Dear All,

The MATSim Monthly Report for March is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+March+2015

This is a bit late and this has two main reasons. The first is the fact that the last week of March, as you know, several MATSim related Meetings took place in Singapore. This made the whole process a bit slower.
The second is that, exactly in one of those meetings, it has been decided to reduce the frequency of such reports. This will become rather bimonthly starting from the next time.  It was therefore a bit less urgent, since you won't be asked for a new contribution in two weeks but rather in late Mai.

I have also introduced a couple of small modifications, also following the discussion in Singapore. The most important are:

-          Moving the news about MATSim contribs in a separate paragraph part of the developers corner (it seemed to me as fitting well there, but I'm open to put it in a separate section)

-          Marking in red the changes (The title if the whole item is new, or something in the description)

Best,
Francesco

-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65

From: Ciari Francesco [mailto:ci...@iv...]
Sent: Montag, 30. März 2015 06:09
To: 'mat...@li...'; 'Matsim Developers'
Subject: [Matsim-devel] MATSim monthly report --> Request of contributions for March Report

Dear MATSim Users and Developers,

This month I'm a bit late asking (except that those involved in one of the various MATSim meetings in Singapore have already been asked in person without much reaction...) but I think now it is high time to do it. Therefore I'm inviting you to send your contributions to me for the new Monthly Report.
It would be great to have it until the end of the current week (April 3rd).

Thanks a lot!

Best,
Francesco

--

Dr. Francesco Ciari

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2,Wolfgang-Pauli-Str. 15
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65
________________________________
Von: Ciari Francesco
Gesendet: Donnerstag, 19. Februar 2015 15:06
An: 'mat...@li...'; 'Matsim Developers'
Betreff: MATSim monthly report --> Request of contributions for February Report
Dear MATSim Users and Developers,

February is short, and another month of MATSim work will end soon. Therefore I'm inviting you to send your contributions to me for the new Monthly Report.
Given the small changes planned in the format, I'm asking you to provide the following information on your projects (if you haven't already):


1-      (Official) Title

2-      Short description of the whole project (at most 2-3 sentences, as the large majority of you did already)

3-      Current status (1 sentence, what you are currently doing)

4-      Foreseen end of the project (year, or year and month)

Please provide your contribution (as usual one per group) until February 26th.
Thanks a lot!

Best,
Francesco


-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65

From: Ciari Francesco
Sent: Dienstag, 20. Januar 2015 16:25
To: 'mat...@li...'; Matsim Developers
Subject: MATSim monthly report - Request for January Update

Dear MATSim Users and Developers,


As announced in my last email I'm getting back in touch with you for an update of the information you sent to me in November. I'll use it to create the January report.

In case you were not able to provide any report yet, you are very welcome to start with it this month. You can refer to the original email here below for further information or just mail me if anything is unclear.

Please provide your information until next Tuesday (January 27th). Also, if there are no relevant changes on your side please mail me anyway and explicitly mention that. This will allow me to avoid sending annoying reminders around just because I'm unsure if nothing happened or you are just late with your contribution.

Thanks a lot!

Francesco

Ps.: It is clearly allowed, but not necessary, to add stuff directly to the webpage. The January one is not yet there, but I will create it in the next few days.


-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65


Dear MATSim users,

At the last MATSim Conceptual Meeting, a few weeks ago, we observed that it would be nice for users to have, at any point in time, a complete overview on what is going on in the MATSim community in terms of projects and major developments.
We decided, therefore, to create "a place" where this information would be collected and updated regularly.
This place will be on the sharing platform Confluence (https://www.atlassian.com/software/confluence) where a MATSim sharing point has been already created (https://matsim.atlassian.net/wiki/display/MATPUB/MATSim).
The overview will have the form of a monthly report were every team working with MATSim will be given the opportunity to report about its latest activity.
I will take care of creating and uploading the report every month. To do that, clearly, I need your help!
Therefore what I'm asking is that every team send me a short note on ongoing MATSim projects, recently closed projects and upcoming projects. If anything else that you believe relevant for the community happened, you are very welcome to share that too. I will then organize the material on a page like this:  https://matsim.atlassian.net/wiki/display/MATPUB/Report+September+2014 . This example gives you also an idea on how much information is needed.
This is not so much, and it shouldn't therefore take so long. But we believe that it will be very helpful to improve information flow in the community.
I'm kindly asking you to have your contribution until the end of this week (October 3).

Thanks,
Francesco

Ps.: Please remember, coordinate this within your team first and do NOT send any individual report (unless you are the only one working with MATSim at your institution).

Re: [Matsim-users] Computing the Emisssions

[Rolando A. <rol...@gm...>]

Dear Mohammad:
Related to your questions:

1) The difference between the "regular" and "emission" network is the
attribute "type" that categorizes the emission links. For example, one
particular link can be defined as the following:

<link id="2726" from="27" to="26" length="200" freespeed="8.3"
capacity="120.0" permlanes="2.0" oneway="1" modes="car" *type="02" */>

The file roadTypeMapping allows to identify the road type according the
HBEFA specifications, in that file, you can find the corresponding
definition, for example: *02*;40kmh;URB/Access/40.

So, I think that your emission network and roadTypeMapping are fine and
correspond with your regular network. As far as I know the transformation
considers the link's free speed of the normal network, therefore if you
need to change something, you need to check the free-speeds in the normal
network and apply again the conversion process.

2) The online HBEFA database does not have enough data to generate the
emission factors. You need to get the licence in order to download the
complete version. For students, the license cost approximately EUR. 50.

3) I have attached the vehicles definition file that I have used for one of
my tests.


I hope I have answered the questions.
Let me know how is going.


Cheers,
Rolando.




On Fri, Jul 1, 2016 at 1:58 AM, Mohammad Aljamal <m7...@vt...> wrote:

> Dear Rolando,
>
> I hope you are doing very well. I have three questions based on the
> previous email.
>
>
> *In step (a)*, I used your class, and it worked completely fine. but *the
> emission network had the network information (only the node and link
> information)*. also, the roadTypeMapping file has the same information
> that you mentioned in the previous email.
>
> 1- Is the roadTypeMapping information the same, or it would change
> depending on the network information, if it needs to change, how can I
> change it?
>
>
> *In step (b)*, Can you tell me from where I can install the HBEFA 3.1
> database?
>
> the only thing that I found is the online version in the HBEFA, Can you
> please see the attached file that shows the file that I got?
>
>
> *In part(c)*, Can you send me a sample of the emissionVehicles (XML) to
> check the structure file?
>
>
> Appreciate your time.
>
> Sorry for any inconvenience,
>
> Sincerely,
> Mohammad.
>
>
>
>
> Mohammad Aljamal
> Graduate Student at Virginia Tech University
> Mobile: +1 (540) 629 1069
>
> On Tue, Jun 21, 2016 at 8:34 PM, Rolando Armas <rol...@gm...>
> wrote:
>
>> Dear Mohammad,
>>
>> I have used the emissions of MATSim extension previously following the
>> documentation steps and the extension's code. I am going to try to
>> summarize that I did.
>>
>> First,you need to prepare some important input files:
>> a) Network and Road Types: We need to re-create the network with
>> respective road types according to HBEFA categorization. For to do that,
>> use the java class code attached (RoadTypeMapper.java) that allows the
>> classification of the network links according to its free-speed (see method
>> mapLink2RoadType).  The outcome is the emission network (XML) file and the
>> raodTypeMapping file. The road type file looks like the following:
>>
>> VISUM_RT_NR;VISUM_RT_NAME;HBEFA_RT_NAME
>> 01;30kmh;URB/Access/30
>> 02;40kmh;URB/Access/40
>> 031;50kmh-1l;URB/Local/50
>> 032;50kmh-2l;URB/Distr/50
>>
>> b) The emission factors: This is a little difficult part because you need
>> previously to get the HBEFA database.  To get the emission factors, you can
>> follow the steps described in "Export from HBEFA3.1"  in
>> http://matsim.org/apidocs/emissions/0.7.0/org/matsim/contrib/emissions/package-summary.html.
>> After that, you need to filter only the emission factors corresponding to
>> the road types which are defined in the roadTypeMapping file.
>> The outcome must be cold average and cold detail records and hot average
>> and hot detail records
>> (EFAColdAvg.csv,EFAHotAvg.csv,EFAColdDetail.csv,EFAHotDetail.csv).
>>
>> c) Vehicle definition file: To define the vehicle categorization for my
>> scenario that I did was to use a classification according to the year model
>> and after that assign an HBEFA category (Euro2-Euro3, etc.)
>> The outcome here is the emissionVehicles (XML) file. Do not forget that
>> your vehicle ids must be the same that agents ids in the initial plans.
>>
>> Second, use the configuration file provided by the emission extension
>> code, change properly the next lines:
>>
>> <module name="network">
>>         <param name="inputNetworkFile"
>> value="&INBASE;/emissionNetwork.xml" />
>>     </module>
>>
>> <module name="plans">
>>         <param name="inputPlansFile" value="&INBASE;/initialplans.xml.gz"
>> />
>>  </module>
>>
>> <module name="emissions" >
>>
>>         <!-- REQUIRED: file with HBEFA 3.2 fleet average cold emission
>> factors -->
>>         <param name="averageFleetColdEmissionFactorsFile"
>> value="&INBASE;/EFAColdAvg.csv" />
>>
>>         <!-- REQUIRED: file with HBEFA 3.2 fleet average warm emission
>> factors -->
>>         <param name="averageFleetWarmEmissionFactorsFile"
>> value="&INBASE;/EFAHotAvg.csv" />
>>
>>         <!-- OPTIONAL: file with HBEFA 3.2 detailed cold emission factors
>> -->
>>         <param name="detailedColdEmissionFactorsFile"
>> value="&INBASE;/EFAColdDetail.csv" />
>>
>>
>>         <!-- OPTIONAL: file with HBEFA 3.2 detailed warm emission factors
>> -->
>>         <param name="detailedWarmEmissionFactorsFile"
>> value="&INBASE;/EFAHotDetail.csv" />
>>
>>
>>         <!-- REQUIRED: mapping from input road types to HBEFA 3.1 road
>> type strings -->
>>         <param name="emissionRoadTypeMappingFile"
>> value="&INBASE;/roadTypeMapping.txt" />
>>
>>         <!-- definition of a vehicle for every person (who is allowed to
>> choose a vehicle in the simulation):
>>          - REQUIRED: vehicle type Id must start with the respective
>> HbefaVehicleCategory followed by `;'
>>          - OPTIONAL: if detailed emission calculation is switched on,
>> vehicle type Id should aditionally contain HbefaVehicleAttributes
>> (`Technology;SizeClasse;EmConcept'), corresponding to the strings in
>> detailedWarmEmissionFactorsFile -->
>>         <param name="emissionVehicleFile"
>> value="&INBASE;/emissionVehicles.xml" />
>>
>>         <!-- if true then detailed emission factor files must be
>> provided! -->
>>         <param name="usingDetailedEmissionCalculation" value="true" />
>>  </module>
>>
>> 3) Test it!: run the RunEmissionToolOnlineExample.java (into emission
>> extension example package)
>>
>> So far, those are the steps that you need to follow.
>>
>> Good Luck!
>>
>> Rolando.
>> Shinshu University
>> Nagano Japan.
>>
>>
>>
>>
>>
>>
>>
>> On Tue, Jun 21, 2016 at 5:45 AM, Mohammad Aljamal <m7...@vt...> wrote:
>>
>>>
>>> Dear All,
>>>
>>> I need to compute the emissions for the data that I have. But I checked
>>> the tutorial for emissions and it was not helpful ( it is
>>> very complicated). The idea is not clear.
>>>
>>>  Can anyone give me some hints to compute the emissions note that I
>>> already have a network and population files?
>>>
>>> Can anyone tell me what do I need to add in the configuration file, and
>>> if there is any path to use in the command line?
>>>
>>>
>>>  Sincerely,
>>> Mohammad.
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and
>>> traffic
>>> patterns at an interface-level. Reveals which users, apps, and protocols
>>> are
>>> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
>>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>>> planning
>>> reports. http://sdm.link/zohomanageengine
>>> _______________________________________________
>>> Matsim-users mailing list
>>> Mat...@li...
>>> https://lists.sourceforge.net/lists/listinfo/matsim-users
>>>
>>>
>>
>
>
> --
>
>
> Mohammad AlJamal
> Master Student at Virginia Tech
> Mobile: +1 (540) 629 1069
>

[Matsim-users] MATSim report --> Request for contributions

[Ciari F. <ci...@iv...>]

Dear MATSim Users and Developers,

I'm kindly asking you to send your contributions for the new Monthly Report.
I'm a bit late on this as I'm currently on holidays and did not have internet access, therefore I would be extremely thankful if you could send me your update until the beginning of the next week (July 4th).

Thanks a lot!

Best,
Francesco

-----------------------------

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65

From: Ciari Francesco [mailto:ci...@iv...]
Sent: Montag, 30. März 2015 06:09
To: 'mat...@li...'; 'Matsim Developers'
Subject: [Matsim-devel] MATSim monthly report --> Request of contributions for March Report

Dear MATSim Users and Developers,

This month I'm a bit late asking (except that those involved in one of the various MATSim meetings in Singapore have already been asked in person without much reaction...) but I think now it is high time to do it. Therefore I'm inviting you to send your contributions to me for the new Monthly Report.
It would be great to have it until the end of the current week (April 3rd).

Thanks a lot!

Best,
Francesco

--

Dr. Francesco Ciari

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2,Wolfgang-Pauli-Str. 15
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65
________________________________
Von: Ciari Francesco
Gesendet: Donnerstag, 19. Februar 2015 15:06
An: 'mat...@li...'; 'Matsim Developers'
Betreff: MATSim monthly report --> Request of contributions for February Report
Dear MATSim Users and Developers,

February is short, and another month of MATSim work will end soon. Therefore I'm inviting you to send your contributions to me for the new Monthly Report.
Given the small changes planned in the format, I'm asking you to provide the following information on your projects (if you haven't already):


1-      (Official) Title

2-      Short description of the whole project (at most 2-3 sentences, as the large majority of you did already)

3-      Current status (1 sentence, what you are currently doing)

4-      Foreseen end of the project (year, or year and month)

Please provide your contribution (as usual one per group) until February 26th.
Thanks a lot!

Best,
Francesco


-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65

From: Ciari Francesco
Sent: Dienstag, 20. Januar 2015 16:25
To: 'mat...@li...'; Matsim Developers
Subject: MATSim monthly report - Request for January Update

Dear MATSim Users and Developers,


As announced in my last email I'm getting back in touch with you for an update of the information you sent to me in November. I'll use it to create the January report.

In case you were not able to provide any report yet, you are very welcome to start with it this month. You can refer to the original email here below for further information or just mail me if anything is unclear.

Please provide your information until next Tuesday (January 27th). Also, if there are no relevant changes on your side please mail me anyway and explicitly mention that. This will allow me to avoid sending annoying reminders around just because I'm unsure if nothing happened or you are just late with your contribution.

Thanks a lot!

Francesco

Ps.: It is clearly allowed, but not necessary, to add stuff directly to the webpage. The January one is not yet there, but I will create it in the next few days.


-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65


Dear MATSim users,

At the last MATSim Conceptual Meeting, a few weeks ago, we observed that it would be nice for users to have, at any point in time, a complete overview on what is going on in the MATSim community in terms of projects and major developments.
We decided, therefore, to create "a place" where this information would be collected and updated regularly.
This place will be on the sharing platform Confluence (https://www.atlassian.com/software/confluence) where a MATSim sharing point has been already created (https://matsim.atlassian.net/wiki/display/MATPUB/MATSim).
The overview will have the form of a monthly report were every team working with MATSim will be given the opportunity to report about its latest activity.
I will take care of creating and uploading the report every month. To do that, clearly, I need your help!
Therefore what I'm asking is that every team send me a short note on ongoing MATSim projects, recently closed projects and upcoming projects. If anything else that you believe relevant for the community happened, you are very welcome to share that too. I will then organize the material on a page like this:  https://matsim.atlassian.net/wiki/display/MATPUB/Report+September+2014 . This example gives you also an idea on how much information is needed.
This is not so much, and it shouldn't therefore take so long. But we believe that it will be very helpful to improve information flow in the community.
I'm kindly asking you to have your contribution until the end of this week (October 3).

Thanks,
Francesco

Ps.: Please remember, coordinate this within your team first and do NOT send any individual report (unless you are the only one working with MATSim at your institution).

Re: [Matsim-users] Process to register a new Vehicle Type

[Agarwal, A. <ami...@ca...>]

Dear Harsha K,

Your question is added at our community wiki.

https://matsim.atlassian.net/wiki/questions/70123545/answers/70123549

Could you please see the hints over there?  Please feel free to get back to us if problem(s) persists.

Thanks.

Regards,
Amit Agarwal
--
www.vsp.tu-berlin.de<http://www.vsp.tu-berlin.de/>
Fon: +49-30-314-25258
Fax: +49-30-314-26269
TU Berlin Sek SG12
Salzufer 17-19
D-10587 Berlin
Germany

On 27 Jun 2016, at 17:01, Harsha K <ha...@fi...<mailto:ha...@fi...>> wrote:

Hello all,

I am trying to register a new vehicle type similar to the car type with different passenger count and different speeds etc. It is not a pt type.

I am trying to find the right method to do this in MATSIM. I am using MATSIM 0.7.0 stable.

I try the following.

In config.xml, I have set mobsim to use data from vehicle data file.
I have added the location of the vehicles file in the "vehicles" module
I have also created a vehicles.xml file using the DTD from the website.
I have checked the network.xml and created a simple demand with 1 person who uses the new mode.

I get an exception in the TripRouter:

2016-06-27 16:48:42,353 ERROR ParallelPersonAlgorithmRunner$ExceptionHandler:163 Thread PersonPrepareForSim.0 died with exception while handling events.
org.matsim.core.router.TripRouter$UnknownModeException: unregistered main mode mtw: does not pertain to [pt, car, ride, walk, bike, undefined]
at org.matsim.core.router.TripRouter.calcRoute(TripRouter.java:161)
at org.matsim.core.router.PlanRouter.run(PlanRouter.java:84)
at org.matsim.population.algorithms.PersonPrepareForSim.run(PersonPrepareForSim.java:114)
at org.matsim.population.algorithms.ParallelPersonAlgorithmRunner$PersonAlgoThread.run(ParallelPersonAlgorithmRunner.java:144)
at java.lang.Thread.run(Thread.java:745)

I am guessing I need a way to register it with the router but I am unable to find where.

I even tried to create a new VehicleFactory but did not know how to invoke it from the controller.

Any help would be appreciated.

Thank you,

Regards,

Harsha K
Researcher
Fields of View
------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape_______________________________________________
Matsim-users mailing list
Mat...@li...
https://lists.sourceforge.net/lists/listinfo/matsim-users

[Matsim-users] Process to register a new Vehicle Type

[Harsha K <ha...@fi...>]

Hello all,

I am trying to register a new vehicle type similar to the car type with
different passenger count and different speeds etc. It is not a pt type.

I am trying to find the right method to do this in MATSIM. I am using
MATSIM 0.7.0 stable.

I try the following.

In config.xml, I have set mobsim to use data from vehicle data file.
I have added the location of the vehicles file in the "vehicles" module
I have also created a vehicles.xml file using the DTD from the website.
I have checked the network.xml and created a simple demand with 1 person
who uses the new mode.

I get an exception in the TripRouter:

2016-06-27 16:48:42,353 ERROR
ParallelPersonAlgorithmRunner$ExceptionHandler:163 Thread
PersonPrepareForSim.0 died with exception while handling events.
org.matsim.core.router.TripRouter$UnknownModeException: unregistered main
mode mtw: does not pertain to [pt, car, ride, walk, bike, undefined]
at org.matsim.core.router.TripRouter.calcRoute(TripRouter.java:161)
at org.matsim.core.router.PlanRouter.run(PlanRouter.java:84)
at
org.matsim.population.algorithms.PersonPrepareForSim.run(PersonPrepareForSim.java:114)
at
org.matsim.population.algorithms.ParallelPersonAlgorithmRunner$PersonAlgoThread.run(ParallelPersonAlgorithmRunner.java:144)
at java.lang.Thread.run(Thread.java:745)

I am guessing I need a way to register it with the router but I am unable
to find where.

I even tried to create a new VehicleFactory but did not know how to invoke
it from the controller.

Any help would be appreciated.

Thank you,

Regards,

Harsha K
Researcher
Fields of View

[Matsim-users] Fwd: Computing the Emisssions

[Rolando A. <rol...@gm...>]

Dear Mohammad,

I have used the emissions of MATSim extension previously following the
documentation steps and the extension's code. I am going to try to
summarize that I did.

First,you need to prepare some important input files:
a) Network and Road Types: We need to re-create the network with respective
road types according to HBEFA categorization. For to do that, use the java
class code attached (RoadTypeMapper.java) that allows the classification of
the network links according to its free-speed (see method
mapLink2RoadType).  The outcome is the emission network (XML) file and the
raodTypeMapping file. The road type file looks like the following:

VISUM_RT_NR;VISUM_RT_NAME;HBEFA_RT_NAME
01;30kmh;URB/Access/30
02;40kmh;URB/Access/40
031;50kmh-1l;URB/Local/50
032;50kmh-2l;URB/Distr/50

b) The emission factors: This is a little difficult part because you need
previously to get the HBEFA database.  To get the emission factors, you can
follow the steps described in "Export from HBEFA3.1"  in
http://matsim.org/apidocs/emissions/0.7.0/org/matsim/contrib/emissions/package-summary.html.
After that, you need to filter only the emission factors corresponding to
the road types which are defined in the roadTypeMapping file.
The outcome must be cold average and cold detail records and hot average
and hot detail records
(EFAColdAvg.csv,EFAHotAvg.csv,EFAColdDetail.csv,EFAHotDetail.csv).

c) Vehicle definition file: To define the vehicle categorization for my
scenario that I did was to use a classification according to the year model
and after that assign an HBEFA category (Euro2-Euro3, etc.)
The outcome here is the emissionVehicles (XML) file. Do not forget that
your vehicle ids must be the same that agents ids in the initial plans.

Second, use the configuration file provided by the emission extension code,
change properly the next lines:

<module name="network">
        <param name="inputNetworkFile" value="&INBASE;/emissionNetwork.xml"
/>
    </module>

<module name="plans">
        <param name="inputPlansFile" value="&INBASE;/initialplans.xml.gz" />
 </module>

<module name="emissions" >

        <!-- REQUIRED: file with HBEFA 3.2 fleet average cold emission
factors -->
        <param name="averageFleetColdEmissionFactorsFile"
value="&INBASE;/EFAColdAvg.csv" />

        <!-- REQUIRED: file with HBEFA 3.2 fleet average warm emission
factors -->
        <param name="averageFleetWarmEmissionFactorsFile"
value="&INBASE;/EFAHotAvg.csv" />

        <!-- OPTIONAL: file with HBEFA 3.2 detailed cold emission factors
-->
        <param name="detailedColdEmissionFactorsFile"
value="&INBASE;/EFAColdDetail.csv" />


        <!-- OPTIONAL: file with HBEFA 3.2 detailed warm emission factors
-->
        <param name="detailedWarmEmissionFactorsFile"
value="&INBASE;/EFAHotDetail.csv" />


        <!-- REQUIRED: mapping from input road types to HBEFA 3.1 road type
strings -->
        <param name="emissionRoadTypeMappingFile"
value="&INBASE;/roadTypeMapping.txt" />

        <!-- definition of a vehicle for every person (who is allowed to
choose a vehicle in the simulation):
         - REQUIRED: vehicle type Id must start with the respective
HbefaVehicleCategory followed by `;'
         - OPTIONAL: if detailed emission calculation is switched on,
vehicle type Id should aditionally contain HbefaVehicleAttributes
(`Technology;SizeClasse;EmConcept'), corresponding to the strings in
detailedWarmEmissionFactorsFile -->
        <param name="emissionVehicleFile"
value="&INBASE;/emissionVehicles.xml" />

        <!-- if true then detailed emission factor files must be provided!
-->
        <param name="usingDetailedEmissionCalculation" value="true" />
 </module>

3) Test it!: run the RunEmissionToolOnlineExample.java (into emission
extension example package)

So far, those are the steps that you need to follow.

Good Luck!

Rolando.
Shinshu University
Nagano Japan.







On Tue, Jun 21, 2016 at 5:45 AM, Mohammad Aljamal <m7...@vt...> wrote:

>
> Dear All,
>
> I need to compute the emissions for the data that I have. But I checked
> the tutorial for emissions and it was not helpful ( it is
> very complicated). The idea is not clear.
>
>  Can anyone give me some hints to compute the emissions note that I
> already have a network and population files?
>
> Can anyone tell me what do I need to add in the configuration file, and if
> there is any path to use in the command line?
>
>
>  Sincerely,
> Mohammad.
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning
> reports. http://sdm.link/zohomanageengine
> _______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users
>
>

[Matsim-users] Computing the Emisssions

[Mohammad A. <m7...@vt...>]

Dear All,

I need to compute the emissions for the data that I have. But I checked the
tutorial for emissions and it was not helpful ( it is very complicated).
The idea is not clear.

 Can anyone give me some hints to compute the emissions note that I already
have a network and population files?

Can anyone tell me what do I need to add in the configuration file, and if
there is any path to use in the command line?


 Sincerely,
Mohammad.

Re: [Matsim-users] Inconsistency in arrival times found when using multimodal module

[Nagel, K. P. Dr. <na...@vs...>]

Dear Miguel,

I entered your question under https://matsim.atlassian.net/wiki/questions/67567633/inconsistent-plans

... and tried to give some hints.

Could you please have a look there?  Thanks ...

Best wishes Kai
See the example of output activity diaries below (in red the inconsistencies). If the scoring function and/or utility function uses the sum of all travel times this would not affect the term related with travel but it does affect the term of activity since the final arrival time to the activity and hence it will affect the available time to perform the destination activity. This would correspond to the initial departure time plus the travel time of the last leg mode.

                                               …</leg>
                                               <act type="work" link="link_car_14667" x="235534.794531" y="5069853.68051" end_time="13:51:52" />
                                               <act type="multimodalTransitDeparture" link="link_car_14667" x="235534.794531" y="5069853.68051" max_dur="00:00:00" />
                                               <leg mode="walk" dep_time="13:51:52" trav_time="00:07:38" arr_time="13:59:30">
                                                               <route type="accessEgressNetworkBased" start_link="link_car_14667" end_link="tr_3209" trav_time="00:00:00" distance="614.9659589308854">{"accessTime":"NaN","onLinksTime":"NaN","links":[],"egressTime":"NaN"}</route>
                                               </leg>
                                               <act type="pt interaction" link="tr_3209" x="235731.942104152" y="5069423.66907436" max_dur="00:00:00" />
                                               <leg mode="pt" trav_time="00:06:00">
                                                               <route type="experimentalPt1" start_link="tr_3209" end_link="tr_3214" trav_time="00:06:00" distance="3722.155136660952">PT1===stop_metro_50.1===L3_0===L3_0===stop_metro_55.1</route>
                                               </leg>
                                               <act type="pt interaction" link="tr_3214" x="238808.920955717" y="5068326.72921347" max_dur="00:00:00" />
                                               <leg mode="walk" dep_time="13:51:52" trav_time="00:05:57" arr_time="13:57:49">
                                                               <route type="accessEgressNetworkBased" start_link="tr_3214" end_link="link_car_17583" trav_time="00:00:00" distance="478.86407193794867">{"accessTime":"NaN","onLinksTime":"NaN","links":[],"egressTime":"NaN"}</route>
                                               </leg>
                                               <act type="other" link="link_car_17583" x="238899.397133" y="5068683.80193" end_time="14:30:49" />
                                               <leg mode="walk" dep_time="14:30:49" trav_time="00:14:00" arr_time="14:44:49">…

Best,

----------------------------------------------------------------------------
Miguel Picornell
Program Manager
Nommon Solutions and Technologies
C/ Diego de León, 47, 28006 Madrid
Tel: +34 918 388 597/ +34 606 70 87 83
www.nommon.es<http://www.nommon.es/>
----------------------------------------------------------------------------
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports. http://pubads.g.doubleclick.net/gampad/clk?id=1444514421&iu=/41014381_______________________________________________
Matsim-users mailing list
Mat...@li...<mailto:Mat...@li...>
https://lists.sourceforge.net/lists/listinfo/matsim-users

[Matsim-users] Inconsistency in arrival times found when using multimodal module

[Miguel P. <mig...@no...>]

Dear all,


We have a question regarding the multimodal module. We have found
inconsistencies in departure times for multimodal simulations, when
multimodal trips are enabled. For an agent performing a multimodal trip, we
found that departure time of each leg is always the same (not updated from
mode to mode). The departure time for the first mode activity is that of
the activity end time, and arrival time is equal to departure time + travel
time. Once the agent changes leg mode from lets say walk to public
transport the departure time is the same as for the previous leg rather
than the arrival time from the previous ‘activity’ walking.


See the example of output activity diaries below (in red the
inconsistencies). If the scoring function and/or utility function uses the
sum of all travel times this would not affect the term related with travel
but it does affect the term of activity since the final arrival time to the
activity and hence it will affect the available time to perform the
destination activity. This would correspond to the initial departure time
plus the travel time of the last leg mode.


                                               …</leg>

                                               <act type="work"
link="link_car_14667" x="235534.794531" y="5069853.68051" end_time="13:51:52"
/>

                                               <act
type="multimodalTransitDeparture" link="link_car_14667" x="235534.794531"
y="5069853.68051" max_dur="00:00:00" />

                                               <leg mode="walk" dep_time="
*13:51:52*" trav_time="00:07:38" arr_time="13:59:30">

                                                               <route
type="accessEgressNetworkBased" start_link="link_car_14667"
end_link="tr_3209" trav_time="00:00:00"
distance="614.9659589308854">{"accessTime":"NaN","onLinksTime":"NaN","links":[],"egressTime":"NaN"}</route>

                                               </leg>

                                               <act type="pt interaction"
link="tr_3209" x="235731.942104152" y="5069423.66907436" max_dur="00:00:00"
/>

                                               <leg mode="pt" trav_time="
00:06:00">

                                                               <route
type="experimentalPt1" start_link="tr_3209" end_link="tr_3214" trav_time="
00:06:00"
distance="3722.155136660952">PT1===stop_metro_50.1===L3_0===L3_0===stop_metro_55.1</route>

                                               </leg>

                                               <act type="pt
interaction" link="tr_3214"
x="238808.920955717" y="5068326.72921347" max_dur="00:00:00" />

                                               <leg mode="walk" dep_time="
*13:51:52*" trav_time="00:05:57" arr_time="13:57:49">

                                                               <route
type="accessEgressNetworkBased" start_link="tr_3214"
end_link="link_car_17583" trav_time="00:00:00"
distance="478.86407193794867">{"accessTime":"NaN","onLinksTime":"NaN","links":[],"egressTime":"NaN"}</route>

                                               </leg>

                                               <act type="other"
link="link_car_17583" x="238899.397133" y="5068683.80193" end_time="14:30:49"
/>

                                               <leg mode="walk" dep_time="
14:30:49" trav_time="00:14:00" arr_time="14:44:49">…


Best,

----------------------------------------------------------------------------
*Miguel Picornell*
Program Manager
Nommon Solutions and Technologies
C/ Diego de León, 47, 28006 Madrid
Tel: +34 918 388 597/ +34 606 70 87 83
www.nommon.es
----------------------------------------------------------------------------

[Matsim-users] MATSIM DRVP

[Quan Z. <qu...@st...>]

Hi,

My name is Quan Zhang. I am a master of Information Technology studying at
University of Melbourne.

Currently, I am doing a research about DRVP in Matsim. Now I have generated
"plan" for Matsim based on trips data on Melbourne. The activity in this
plan is based on coordinate. And there is only coordiante for every
acitvity. But in DRVP, every activity need an "link id" so that the Matsim
can calculate the route for this activity. Specifically, according to the
coordiante of each activity, I should find a link from network for this
activity. I do not know how to get a "link id" through a coordinate in
Matsim. Could you give me some introduction? Thank you very much!

Kind regards,
Quan

Re: [Matsim-users] Replacing a route

[Nagel, K. P. Dr. <na...@vs...>]

Dear Raymond,

I think you would have to look into EditRoutes how it is done there.  

Note that there is a variety of methods, some of them pre-trip and some of them en-route.  There is also a bit of messiness at least in the development version, which came out of the fact that we now have the option to always include walk legs before and after car legs (as it should be), but some of the infrastructure in EditRoutes was not compatible with this.  

So you need to be clear if you want to replan the full trip (from activity to activity), or just the leg.

Best

Kai


> On 12 May 2016, at 07:30, Raymond Schultz <ra...@kk...> wrote:
> 
> Ok, first off, thank you to everyone who has been helping me through
> this for the past 2-3 weeks.
> 
> I am very close to what I need to do, but my last hurdle is this: I
> need to be able to insert my own route during a simulation run.
> 
> I have implemented a MobsimBeforeSimStepListener and I can see
> everything I need to change:
> 
> mobsimAgent
> Plan
> CurrentPlanElement
> 
> What I need to figure out is how to replace just the current route,
> and how to build one myself. If I read the API correctly, the
> EditRoutes method still uses the internal matsim tripRouter to build
> the new route. I want to do this part myself.
> 
> Basically, what I am looking for is how do I build a route myself, and
> then how do I insert it during the MobsimBeforeSimStepListener such
> that it will use my new route and not the original?
> 
> Thanks again,
> 
> Ray
> 
> ------------------------------------------------------------------------------
> Mobile security can be enabling, not merely restricting. Employees who
> bring their own devices (BYOD) to work are irked by the imposition of MDM
> restrictions. Mobile Device Manager Plus allows you to control only the
> apps on BYO-devices by containerizing them, leaving personal data untouched!
> https://ad.doubleclick.net/ddm/clk/304595813;131938128;j
> _______________________________________________
> Matsim-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matsim-users

[Matsim-users] Replacing a route

[Raymond S. <ra...@kk...>]

Ok, first off, thank you to everyone who has been helping me through
this for the past 2-3 weeks.

I am very close to what I need to do, but my last hurdle is this: I
need to be able to insert my own route during a simulation run.

I have implemented a MobsimBeforeSimStepListener and I can see
everything I need to change:

mobsimAgent
Plan
CurrentPlanElement

What I need to figure out is how to replace just the current route,
and how to build one myself. If I read the API correctly, the
EditRoutes method still uses the internal matsim tripRouter to build
the new route. I want to do this part myself.

Basically, what I am looking for is how do I build a route myself, and
then how do I insert it during the MobsimBeforeSimStepListener such
that it will use my new route and not the original?

Thanks again,

Ray

Re: [Matsim-users] withinDayMobsimListener

[Zilske, M. <mic...@tu...>]

Hi Raymond,

> 1. In order to get it to even run, I had to download Google Guice - to
> get the com.google.inject.Provider  - I downloaded 3.0. Does anyone
> know if this is the correct version?

It’s 4.0 - in your repository, you already have all the libraries in the “libs” sub-folder of the matsim folder. Fixing your project configuration should solve it.

Our supported examples use Maven for project configuration. In general, I would suggest: 

- start from one of our general examples
- progress to the more specialized functionality you want to use (withinday in your case)
- only then start integrating into your own larger system

Cheers
Michael

[Matsim-users] withinDayMobsimListener

[Raymond S. <ra...@kk...>]

Hello all,

I am having troubles getting the withinDayMobsimListener to work.

1. In order to get it to even run, I had to download Google Guice - to
get the com.google.inject.Provider  - I downloaded 3.0. Does anyone
know if this is the correct version?

I have copied the code from the example provided (example50) - but
everytime I attempt to run, I get:

2016-05-07 13:46:15,166 ERROR AbstractController:175 Getting uncaught
Exception in Thread main
com.google.inject.CreationException: Guice creation errors:

My code is at: https://github.com/schultrc/G.R.I.D..git   - use branch
rayHome_4_30_1


I would love any help or anyone who has used the withinDay stuff.

Thank you,

-Ray

[Matsim-users] MATSim report --> March-April Report is online!

[Ciari F. <ci...@iv...>]

Dear All,

The MATSim Monthly Report for March-April 2016 is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+March-April

Thanks a lot for all your contributions!

I'll get back in touch the last week of June for a new update.

Best,
Francesco


From: Ciari Francesco
Sent: Dienstag, 8. März 2016 22:16
To: 'mat...@li...'; 'Matsim Developers'
Cc: 'Gunnar Flötteröd'
Subject: RE: MATSim report --> Request for contributions

Dear All,

The MATSim Monthly Report for January-February 2016 is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+January-February

Thanks a lot for all your contributions!

I'll get back in touch the last week of April for a new update.

Best,
Francesco


From: Ciari Francesco
Sent: Freitag, 4. Dezember 2015 15:35
To: 'mat...@li...'; 'Matsim Developers'
Cc: 'Gunnar Flötteröd'
Subject: MATSim report --> Request for contributions

Dear all,

You might have wonder why the request did not come earlier. Indeed, I thought it was not a good option to have an October-November report followed by a December-January one. The latter would have been  an odd time span for the report, from a calendar standpoint and, most importantly, from a work standpoint (given upcoming holidays and TRB). So, I decided to stretch the current report over three months and go for a fresh start (and back to the two months rhythm) in 2016.

All this means that I'm kindly asking you to send me your contributions until December 11th.

Thanks a lot!

Best,
Francesco

From: Ciari Francesco
Sent: Freitag, 25. September 2015 13:31
To: 'mat...@li...'; 'Matsim Developers'
Cc: 'Gunnar Flötteröd'
Subject: RE: MATSim monthly report --> Request for contributions

Dear MATSim Users and Developers,

I'm kindly asking you to send your contributions to me for the new Monthly Report.
It would be great to have it until the end of the next week (October 2nd).

As with this edition we are completing the first year of MATSim reports, I'd like to take this as an opportunity to ask you a short feedback: Do you find it useful? (for some perhaps the question should be: did you ever had a look at it?) Do you have any suggestion to improve it?

Thanks a lot!

Best,
Francesco


From: Ciari Francesco
Sent: Freitag, 10. April 2015 13:30
To: 'mat...@li...'; 'Matsim Developers'
Cc: Gunnar Flötteröd
Subject: MATSim monthly report --> March report is online!

Dear All,

The MATSim Monthly Report for March is online.

https://matsim.atlassian.net/wiki/display/MATPUB/Report+March+2015

This is a bit late and this has two main reasons. The first is the fact that the last week of March, as you know, several MATSim related Meetings took place in Singapore. This made the whole process a bit slower.
The second is that, exactly in one of those meetings, it has been decided to reduce the frequency of such reports. This will become rather bimonthly starting from the next time.  It was therefore a bit less urgent, since you won't be asked for a new contribution in two weeks but rather in late Mai.

I have also introduced a couple of small modifications, also following the discussion in Singapore. The most important are:

-          Moving the news about MATSim contribs in a separate paragraph part of the developers corner (it seemed to me as fitting well there, but I'm open to put it in a separate section)

-          Marking in red the changes (The title if the whole item is new, or something in the description)

Best,
Francesco

-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65

From: Ciari Francesco [mailto:ci...@iv...]
Sent: Montag, 30. März 2015 06:09
To: 'mat...@li...'; 'Matsim Developers'
Subject: [Matsim-devel] MATSim monthly report --> Request of contributions for March Report

Dear MATSim Users and Developers,

This month I'm a bit late asking (except that those involved in one of the various MATSim meetings in Singapore have already been asked in person without much reaction...) but I think now it is high time to do it. Therefore I'm inviting you to send your contributions to me for the new Monthly Report.
It would be great to have it until the end of the current week (April 3rd).

Thanks a lot!

Best,
Francesco

--

Dr. Francesco Ciari

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2,Wolfgang-Pauli-Str. 15
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65
________________________________
Von: Ciari Francesco
Gesendet: Donnerstag, 19. Februar 2015 15:06
An: 'mat...@li...'; 'Matsim Developers'
Betreff: MATSim monthly report --> Request of contributions for February Report
Dear MATSim Users and Developers,

February is short, and another month of MATSim work will end soon. Therefore I'm inviting you to send your contributions to me for the new Monthly Report.
Given the small changes planned in the format, I'm asking you to provide the following information on your projects (if you haven't already):


1-      (Official) Title

2-      Short description of the whole project (at most 2-3 sentences, as the large majority of you did already)

3-      Current status (1 sentence, what you are currently doing)

4-      Foreseen end of the project (year, or year and month)

Please provide your contribution (as usual one per group) until February 26th.
Thanks a lot!

Best,
Francesco


-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65

From: Ciari Francesco
Sent: Dienstag, 20. Januar 2015 16:25
To: 'mat...@li...'; Matsim Developers
Subject: MATSim monthly report - Request for January Update

Dear MATSim Users and Developers,


As announced in my last email I'm getting back in touch with you for an update of the information you sent to me in November. I'll use it to create the January report.

In case you were not able to provide any report yet, you are very welcome to start with it this month. You can refer to the original email here below for further information or just mail me if anything is unclear.

Please provide your information until next Tuesday (January 27th). Also, if there are no relevant changes on your side please mail me anyway and explicitly mention that. This will allow me to avoid sending annoying reminders around just because I'm unsure if nothing happened or you are just late with your contribution.

Thanks a lot!

Francesco

Ps.: It is clearly allowed, but not necessary, to add stuff directly to the webpage. The January one is not yet there, but I will create it in the next few days.


-------------------------------

Francesco Ciari, PhD

Lecturer, Research Associate

ETH Zürich, IVT - Institute for Transport Planning and Systems

HIL F 33.2, Stefano-Franscini-Platz 5
8093 Zürich, CH

ci...@iv...<mailto:ci...@iv...>

Tel: +41 44 633 71 65


Dear MATSim users,

At the last MATSim Conceptual Meeting, a few weeks ago, we observed that it would be nice for users to have, at any point in time, a complete overview on what is going on in the MATSim community in terms of projects and major developments.
We decided, therefore, to create "a place" where this information would be collected and updated regularly.
This place will be on the sharing platform Confluence (https://www.atlassian.com/software/confluence) where a MATSim sharing point has been already created (https://matsim.atlassian.net/wiki/display/MATPUB/MATSim).
The overview will have the form of a monthly report were every team working with MATSim will be given the opportunity to report about its latest activity.
I will take care of creating and uploading the report every month. To do that, clearly, I need your help!
Therefore what I'm asking is that every team send me a short note on ongoing MATSim projects, recently closed projects and upcoming projects. If anything else that you believe relevant for the community happened, you are very welcome to share that too. I will then organize the material on a page like this:  https://matsim.atlassian.net/wiki/display/MATPUB/Report+September+2014 . This example gives you also an idea on how much information is needed.
This is not so much, and it shouldn't therefore take so long. But we believe that it will be very helpful to improve information flow in the community.
I'm kindly asking you to have your contribution until the end of this week (October 3).

Thanks,
Francesco

Ps.: Please remember, coordinate this within your team first and do NOT send any individual report (unless you are the only one working with MATSim at your institution).