Recent changes to Attribute Values

Attribute Values modified by Agnar Renolen

Agnar Renolen — Sat, 27 Dec 2014 22:01:01 -0000

--- v6
+++ v7
@@ -60,6 +60,7 @@
 Fonts
 -----
 Currently, mapframer only supports the following fonts.
+
 
  
   Helvetica Times-Roman Courier

Attribute Values modified by Agnar Renolen

Agnar Renolen — Sat, 27 Dec 2014 22:00:36 -0000

--- v5
+++ v6
@@ -60,10 +60,14 @@
 Fonts
 -----
 Currently, mapframer only supports the following fonts.
-
-Family                   | Bold                | Italic             | Bold-Italic
--------------------------|---------------------|--------------------|--------------
-Helvetica                | Helvetica-Bold      | Helvetica-Oblique  | Helvetica-BoldOblique
-Times-Roman              | Times-Bold          | Times-Italic       | Times-BoldItalic
-Courier                  |  Courier-Bold       | Courier-Italic     | Courier-BoldItalic
-
+
+ 
+  
+  
+  
+  
+Helvetica Times-Roman Courier 
+ 
Helvetica-Bold Times-Bold Courier-Bold 
+ 
Helvetica-Oblique Times-Italic Courier-Oblique 
+ 
Helvetica-BoldOblique Times-BoldItalic Courier-BoldOblique 
+

Attribute Values modified by Agnar Renolen

Agnar Renolen — Sat, 27 Dec 2014 21:54:26 -0000

--- v4
+++ v5
@@ -63,10 +63,7 @@

 Family                   | Bold                | Italic             | Bold-Italic
 -------------------------|---------------------|--------------------|--------------
-Helvetica                |Helvetica-Bold       | Helvetica-Oblique  | Helvetica-BoldOblique
-Times-Roman
+Helvetica                | Helvetica-Bold      | Helvetica-Oblique  | Helvetica-BoldOblique
+Times-Roman              | Times-Bold          | Times-Italic       | Times-BoldItalic
+Courier                  |  Courier-Bold       | Courier-Italic     | Courier-BoldItalic

-Helvetica                | Times-Roman         | Courier
-Helvetica-Bold           | Times-Bold          | Courier-Bold
-Helvetica-Oblique        | Times-Italic        | Courier-Italic
-Helvetica-BoldOblique    | Times-BoldItalic    | Courier-BoldItalic

Attribute Values modified by Agnar Renolen

Agnar Renolen — Sat, 27 Dec 2014 21:52:35 -0000

--- v3
+++ v4
@@ -61,15 +61,12 @@
 -----
 Currently, mapframer only supports the following fonts.

-* Helvetica
-* Helvetica-Bold
-* Helvetica-Italic
-* Helvetica-BoldItalic
-* Times-Roman
-* Times-Bold
-* Times-Italic
-* Times-BoldItalic
-* Courier
-* Courier-Bold
-* Courier-Italic
-* Courier-BoldItalic
+Family                   | Bold                | Italic             | Bold-Italic
+-------------------------|---------------------|--------------------|--------------
+Helvetica                |Helvetica-Bold       | Helvetica-Oblique  | Helvetica-BoldOblique
+Times-Roman
+
+Helvetica                | Times-Roman         | Courier
+Helvetica-Bold           | Times-Bold          | Courier-Bold
+Helvetica-Oblique        | Times-Italic        | Courier-Italic
+Helvetica-BoldOblique    | Times-BoldItalic    | Courier-BoldItalic

Attribute Values modified by Agnar Renolen

Agnar Renolen — Sat, 27 Dec 2014 18:58:21 -0000

--- v2
+++ v3
@@ -3,8 +3,7 @@

 Paper Units
 -----------
-Some of the element attributes in the file can be specified in *paper units*. The unit should be written immediately after the nominal value
-("10mm") or a space between ("10 mm").
+Some of the element attributes in the file can be specified in *paper units*. The unit should be written immediately after the nominal value ("10mm") or a space between ("10 mm").

 The following units are supported:

@@ -35,16 +34,11 @@

 Fractions
 ---------
-Some elements are specified as fractions of a containing dimension.
-These values can be either specified as percent as in "50%", as a
-floating number as in "0.5", or as a fraction as in "1/2".
+Some elements are specified as fractions of a containing dimension. These values can be either specified as percent as in "50%", as a floating number as in "0.5", or as a fraction as in "1/2".

 Color
 -----
-Some elements requires you to specify a color.  This can be specified by
-their name, by their RGB components or the CMYK components.  If your
-intent is to produce a frame for print, use CMYK-specifiers, otherwise,
-use RGB or named colors.
+Some elements requires you to specify a color.  This can be specified by their name, by their RGB components or the CMYK components.  If your intent is to produce a frame for print, use CMYK-specifiers, otherwise, use RGB or named colors.

 Colors can be specified in the following ways:

Attribute Values modified by Agnar Renolen

Agnar Renolen — Sat, 27 Dec 2014 18:16:17 -0000

--- v1
+++ v2
@@ -3,9 +3,8 @@

 Paper Units
 -----------
-Some of the element attributes in the file can be specified in *paper
-units*. The unit shoul be written emediatley after the nominal value
-("10mm") or a space bewteen ("10 mm").
+Some of the element attributes in the file can be specified in *paper units*. The unit should be written immediately after the nominal value
+("10mm") or a space between ("10 mm").

 The following units are supported:

@@ -18,18 +17,17 @@

 Map Units
 ---------
-Some of the element attributes may be specifies in *map units* or in
-*latitude/longitude* units:
+Some of the element attributes may be specifies in *map units* or in *latitude/longitude* units:

 For coordinate values, the following units are supported:

-* **m** - meter (defafult)
+* **m** - meter (default)
 * **km** - kilometer
 * **ft** - feet
 * **mi** - miles
 * **nm** - nautical miles

-For longitude and latitude values, the follwing units are supported:
+For longitude and latitude values, the following units are supported:

 * **deg** - degrees
 * **min** - minutes 
@@ -38,20 +36,20 @@
 Fractions
 ---------
 Some elements are specified as fractions of a containing dimension.
-These values can be either specified as precent as in "50%", as a
+These values can be either specified as percent as in "50%", as a
 floating number as in "0.5", or as a fraction as in "1/2".

 Color
 -----
 Some elements requires you to specify a color.  This can be specified by
 their name, by their RGB components or the CMYK components.  If your
-intent is to produce a frame for print, use CMYK-specifieres, otherwise,
+intent is to produce a frame for print, use CMYK-specifiers, otherwise,
 use RGB or named colors.

 Colors can be specified in the following ways:

 * **color name** - Simply specify the name of the color. The color names
-  recognized are the same colors that are definted in the colors class
+  recognized are the same colors that are defined in the colors class
   of the rebortlab.lib module.

 * **cmyk(<cyan>,<magenta>,<yellow>,<black>)** - Specifies in percent, the
@@ -59,10 +57,10 @@
   /brown/ color: `cmyk(0,56,100,20)`

 * **rgb(<red>,<green>,<blue>)** - Specifies in range 0 to 255 the amount of
-  red green and black.  The following value specifies yellow:
+  red green and blue.  The following value specifies yellow:
   `rgb(255,255,0)`.

-* **#<red><green><blue>**: Specifies the color using Web specification.
+* **#<red><green><blue>** - Specifies the color using Web specification.
   `rgb(255,255,0)` equals `#FFFF00`.

 Fonts

Attribute Values modified by Agnar Renolen

Agnar Renolen — Thu, 25 Dec 2014 22:39:04 -0000

Attribute Values

Paper Units

Some of the element attributes in the file can be specified in paper
units. The unit shoul be written emediatley after the nominal value
("10mm") or a space bewteen ("10 mm").

The following units are supported:

pt - points (default)
mm - millimeter
cm - centimeter
in - inch

If no unit is provided, points (pt) is assumed.

Map Units

Some of the element attributes may be specifies in map units or in
latitude/longitude units:

For coordinate values, the following units are supported:

m - meter (defafult)
km - kilometer
ft - feet
mi - miles
nm - nautical miles

For longitude and latitude values, the follwing units are supported:

deg - degrees
min - minutes
sec - seconds (default)

Fractions

Some elements are specified as fractions of a containing dimension.
These values can be either specified as precent as in "50%", as a
floating number as in "0.5", or as a fraction as in "1/2".

Color

Some elements requires you to specify a color. This can be specified by
their name, by their RGB components or the CMYK components. If your
intent is to produce a frame for print, use CMYK-specifieres, otherwise,
use RGB or named colors.

Colors can be specified in the following ways:

color name - Simply specify the name of the color. The color names
recognized are the same colors that are definted in the colors class
of the rebortlab.lib module.
cmyk(<cyan>,<magenta>,<yellow>,<black>) - Specifies in percent, the
components of he color. For example the following value specifies the
/brown/ color: cmyk(0,56,100,20)
rgb(<red>,<green>,<blue>) - Specifies in range 0 to 255 the amount of
red green and black. The following value specifies yellow:
rgb(255,255,0).
#<red><green><blue>: Specifies the color using Web specification.
rgb(255,255,0) equals #FFFF00.

Fonts

Currently, mapframer only supports the following fonts.

Helvetica
Helvetica-Bold
Helvetica-Italic
Helvetica-BoldItalic
Times-Roman
Times-Bold
Times-Italic
Times-BoldItalic
Courier
Courier-Bold
Courier-Italic
Courier-BoldItalic