Sadie110 posted a comment on discussion Open Discussion

Yes, it’s possible to import products and assign them to subcategories without relying solely on category_id. You can map products to categories using another attribute, such as category name, slug, or a custom field, as long as your import tool or script is set up to recognize that attribute and match it to the correct category in your system. https://www.bestcarbattery.co.uk/

Sadie modified a comment on discussion Open Discussion

Yes its possible. https://www.laptopstudies.com/ https://www.laptopicker.com/ https://www.laptopinspect.com/ https://tehzib.pk/ https://www.bmstechnologies.co.uk/

Sadie modified a comment on discussion Open Discussion

Yes its possible. https://www.laptopstudies.com/ https://www.laptopicker.com/ https://www.laptopinspect.com/ https://tehzib.pk/

Zeus Design modified a comment on discussion Open Discussion

Hey there, In the world of electronics, the magic happens when the hardware (the physical components like circuits) and firmware (the software that tells it what to do) work together seamlessly. It's not always a smooth ride, though! Making sure they "speak the same language" to avoid glitches, keeping them in perfect sync like a band, and fitting all the instructions into limited firmware space are just some of the challenges. But with early collaboration between hardware and firmware engineers,...

Zeus Design modified a comment on discussion Open Discussion

In the world of electronics, the magic happens when the hardware (the physical components like circuits) and firmware (the software that tells it what to do) work together seamlessly. It's not always a smooth ride, though! Making sure they "speak the same language" to avoid glitches, keeping them in perfect sync like a band, and fitting all the instructions into limited firmware space are just some of the challenges. But with early collaboration between hardware and firmware engineers, clear instructions,...

Zeus Design posted a comment on discussion Open Discussion

In the world of electronics, the magic happens when the hardware (the physical components like circuits) and firmware (the software that tells it what to do) work together seamlessly. It's not always a smooth ride, though! Making sure they "speak the same language" to avoid glitches, keeping them in perfect sync like a band, and fitting all the instructions into limited firmware space are just some of the challenges. But with early collaboration between hardware and firmware engineers, clear instructions,...

Alex posted a comment on discussion Open Discussion

Yes, it is possible to import products and assign them to subcategories based on a category attribute other than category_id. This process can be achieved using various methods depending on the e-commerce platform or content management system (CMS) you are using. https://austindbtassociates.com/

Sadie modified a comment on discussion Open Discussion

Yes its possible. https://www.laptopstudies.com/ https://www.laptopicker.com/ https://www.laptopinspect.com/

gsd sdf posted a comment on discussion Open Discussion

This column must be stuffed handiest for "configurable" traces and ought to be full of characteristic names you need for use as link among simples & configurables for 30-06 ammo program.

Luke Reed posted a comment on discussion Open Discussion

Video editing is one of the most demanding tasks among all computer users. Video editing laptops are high-performance laptops that support video editing software. So if you are looking for a laptop for video editing, then this is the article for you. Here at Laptopsventure.us we reviewed different video editing laptops and selected the following laptops for video editing.

Shyam gupta posted a comment on discussion Open Discussion

Yes there are so many great options available but there are some limited touchscreen laptops for gaming I have found some great options https://ultrabooktech.com/best-touch-screen-laptop-for-gaming/

Shyam gupta posted a comment on discussion Open Discussion

Yes it is possible but its a lengthy and time consuming process more powerful laptop can handle these kind of task very easily.

Sadie posted a comment on discussion Open Discussion

Yes its possible. https://www.laptopstudies.com/

Muhammad Afzal posted a comment on discussion Open Discussion

Is it possible to to buy a 17 inch gaming laptop for 1500 dollars, i really wanna buy that kind of laptop for my youtube channel,

Muhammad Afzal posted a comment on discussion Open Discussion

What could be the perfect machine for game design students as i'm from game developer. i just found a guide of game design laptops. but stll confused,

Muhammad Afzal posted a comment on discussion Open Discussion

Well, i also found a Best Ryzen 5600x RAM thanks to Dr Tech Reviews , they help me a lot.

if ber posted a comment on discussion Open Discussion

Depending on how many products you import, step 2 can be lengthy (a lot longer than import itself, on the grounds that magento indexer is extraordinarily terrible designed in term of blog performance.

shint mosn posted a comment on discussion Open Discussion

My opinion is you haven't successfully set course into "php" command. In Magmi reindexer in confgiure segment there's "PHP CLI command" and there you shoult write direction for your php. You can see one of my page of smoker reviews.

gesbt rdsgbr posted a comment on discussion Open Discussion

this column has to be filled only for "configurable" lines and should be filled with attribute names you want to be used as link between simples & configurables. however there is surely a problem in the plugin association does not work as you can check. If i have configurable_attributes column:color, size There is no error while importing the product but only the simple product will import not the configurable

Navnit viradiya posted a comment on discussion Open Discussion

Hi, I have import configurable product using attached csv. import process working fine but after import not able access product on front-end with url key. Means it will access without url key like https://domain.com/catalog/product/view/id/3572/s/test-configurable-url/ I want to need url like : https://domain.comtest-configurable-url.html Thank You

MAURIX posted a comment on discussion Help

i solved it with preg_replace

MAURIX posted a comment on discussion Help

I use magmi to update my Magento catalog, since i have in the import.csv file some product in stock with negative quantity (-2 for example) i noticed that magento make the sum of the actual quantity in the database with the negative quantity in the csv file. Let's say i have in the DB a quantity of 4 and when i go to update i have in the csv file for this product a qty of -2 i would expect to update the catalog qty to 0 but it doesn't happen cause it makes 4-2=2 and this is an error for me. I'm wondering...

Giuseppe created ticket #153

Import product info using ref_code instead of sku

Giuseppe created ticket #152

Map import using another filed (not sku)

aveeva posted a comment on discussion Open Discussion

How to configure magmo to magento 2.3?

Roshan Sharma created ticket #151

magmi login not working after install SUPEE-11219 patch

Gustavo Ulyssea created ticket #150

Magmi for Magento 2 creating entries to store 1 instead of only updating store 0 (default)

Moiz Syed modified a comment on ticket #149

Moiz Syed posted a comment on ticket #149

Hi Sabastien, I am trying to upload the special prices by magmi but I am getting error and can only update the “Simple product” which are “Not Visible Indivisually” However I get error when I try to upload or update “Configurable” or “Simple” product which are “Catalog, Search” I noticed the spelling in of "Catalog, Search" in my Magento is "Catalogue, Search" not sure if this is because of that, and the spelling next to "Dashboard" and "Sales" is "Catalogue" as well. Please see the screenshot and...

MAURIX posted a comment on discussion Open Discussion

I've been able to make it. Thanks Sebastien

Sebastien Bracquemont posted a comment on discussion Open Discussion

did you activate the "Generic mapper plugtin" ? otherwise , mapping file won't be read. moreover, use "categories" lowercase as column name. That's the only things i could find now to explain your problem. Also, make sure you are using the latest magmi version (from github repo , not from sourceforge which is a little bit older) Le ven. 30 août 2019 à 00:25, MAURIX maurixxxx@users.sourceforge.net a écrit : Hi Sebastien, thank you very much for your help i was trying quickly the second method but...

MAURIX posted a comment on discussion Open Discussion

Hi Sebastien, thank you very much for your help i was trying quickly the second method but may be i didn't understand well because i have been able to create the new category but it has been named A025 and not the full name (clothes). I created the categories.csv like you suggest (A025;CLOTHES) and saved it in the magmi/plugins/itemprocessors/genericmapper/mappings directory. I added a column CATEGORIES in the import csv file with the value A025 and did the import, but the result is what i wrote...

Sebastien Bracquemont posted a comment on discussion Open Discussion

Currently magmi has no « official » way to get « magento value » for categories however , some plugins can help you. « Generic Mapper » plugin can do the trick for you. Create a file named « category_id.csv » Inside « magmi/plugins/itemprocessors/genericmapper/mappings » directory In this file just put one line per input category you want to map (for example) Example : If you want to put your ‘A025’ input category Inside category_id 101 of magento , and category ‘A026’ into category 223 The file...

MAURIX posted a comment on discussion Open Discussion

I need to import a 3rd part catalog in a magento store. In this catalog the only reference for category assignment is their category id that unfortunately is a string like A025 and not an integer. And i have only the last subcategory id, not the full path. Is it possible to create a new category attribute and use Magmi to import products and assign them to sub/categories based on the new category attribute( which is A025 for example) or magmi can assign products to category only based on categor...

Thomas Persson posted a comment on discussion Help

We are facing an issue with our custom magmi solution, which automatically imports from our ERP. It simply doesn't work, and won't stop running. From our custom dashboard, we can see the log: http://prntscr.com/omyvmw The import has been running for ages now, and we have tried a lot of stuff to try and shut it down. We have restarted php-fpm, changed folder name of magmi, changed settings in SQL_MODE, changed setting in categoriesimport.php, but still with no luck. A look at the folders: http://...

Leo modified a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Magmi 7.23 : https://github.com/macopedia/magmi-m2/tree/magento2 Import products 100% ok, and the result import images in /public_html/pub/media/catalog/product : it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 accept only one url on the column "additional_images" "base_image" and "thumbnail_image" " small_image" ? Exemple : http://www.mobi.be/image1.jpg, http://www.mobi.be/image2.jpg...

Leo modified a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Magmi 7.23 : https://github.com/macopedia/magmi-m2/tree/magento2 Import products 100% ok, and the result import images in /public_html/pub/media/catalog/product : it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 accept only one url on the column "additional_images" "base_image" and "thumbnail_image" " small_image" ? Exemple : http://www.mobi.be/image1.jpg, http://www.mobi.be/image2.jpg...

Leo modified a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Import products 100% ok, and the result import images in /public_html/pub/media/catalog/product : it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 accept only one url on the column "additional_images" "base_image" and "thumbnail_image" " small_image" ? Exemple : http://www.mobi.be/image1.jpg, http://www.mobi.be/image2.jpg in a cell of the column Magmi 7.23 : https://github.com/macopedia/magmi-m2/tree/magento2...

Leo modified a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Import products 100% ok, and the result import images in /public_html/pub/media/catalog/product : it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 accept only one url on the column "additional_images" "base_image" and "thumbnail_image" " small_image" ? Exemple : http://www.mobi.be/image1.jpg, http://www.mobi.be/image2.jpg in a cell of the column Magmi 7.23 : https://github.com/macopedia/magmi-m2/tree/magento2...

Leo modified a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Import products 100% ok, and the result import images in pub / media / catalog: it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 accept only one url on the column "additional_images" "base_image" and "thumbnail_image" " small_image" ? Exemple : http://www.mobi.be/image1.jpg, http://www.mobi.be/image2.jpg in a cell of the column Magmi 7.23 : https://github.com/macopedia/magmi-m2/tree/magento2...

Leo modified a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Import products 100% ok, and the result import images in pub / media / catalog: it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 accept only one url on the column "additional_images" "base_image" and "thumbnail_image" " small_image" ? Exemple : http://www.mobi.be/image1.jpg, http://www.mobi.be/image2.jpg in a cell of the column Thanks

Leo posted a comment on discussion Help

Hi, I installed magento 2.3.2 and magmi 7.23 for my simples products, everything works fine. Import products 100% ok, and the result import images in pub / media / catalog: it's ok , but the image vignette does not display on backend. (it's not important) Magmi 7.23 does not accept an url in the column "additional_images" when importing but accepts an url in "base_image" and "thumbnail_image" and " small_image" Thanks

Leo modified a comment on ticket #143

@Priva Agrawal @Zotezo Tech hi, yes magmi 0.7.23 works with magento 2.3.2. and php 7.2

Leo posted a comment on ticket #143

@Priva Agrawal hi, i used magmi 0.7.23 with magento 2.1 and it works but i don't know if it works with magento 2.3.2. You can test it

Priya Agrawal posted a comment on ticket #143

Hi, I am also facing the same issue. I am using Magento 2.3.2 and PHP version 7.2. Also tried with Magento 1.9 and PHP 7.0. Please help me out to resolve this. Thanks.

NewbieMagmiUser created ticket #149

Error when importing

NewbieMagmiUser posted a comment on discussion Help

When importing product images using MAGMI, I received the following error message "plugin;ImageAttributeItemProcessor;warning:Image attributes processor v1.0.25 - error copying media/catalog/product/4/1/413fjcrik3l.jpg : download error,URL https://images-na.ssl-images-amazon.com/images/I/413fjCRIK3L.jpg is unreachable" The URL is correct and functioning. What else needs to be done?

Gandrap posted a comment on discussion Help

Hi to all, I am having problem with new simple products that should belong to existing configurable. When magmi finish import, new simple products stay simple, but they should belong to configurable. Anyone knows how to handle this problem? thanks.

Ricardo Martins posted a comment on discussion Help

I solved my problem with the reindex ("could not open..." ) by adding magento path to basedir param in conf/magmi.ini

Abdulkadir Agoliya posted a comment on discussion Open Discussion

Hi , I have install magento and Magmi on same server but i want to execute magmi from third party software can you please tell me how to do this. Thanks, Abdulkadir Agoliya

Sarieh AlMidani posted a comment on discussion Help

I had an import that seemed to be going succesfully, however it seemed to have deleted all the attribute sets that were on the website, thus delteing all products attached to them. Doesn anyone know if there's a way to fix this? to reverse this? Any help is greatly appreaciated, thank you!

Ryan modified a comment on ticket #111

You could try looking at this thread to see if it helps with your issue https://sourceforge.net/p/magmi/discussion/1228365/thread/86a2d57c/ I suspect your CSV isn't formatted properly for both of your issues. Magmi is very particular about how the file is formatted. You definitely don't want to add extra any quotes into the cell if you're using Excel. You also may be better off using a tab delimited file per the method described here: https://understandinge.com/forum/all-things-coding/importing-a-tab-delimited-file/...

Ryan posted a comment on ticket #111

You could try looking at this thread to see if it helps with your issue https://sourceforge.net/p/magmi/discussion/1228365/thread/86a2d57c/ I suspect your CSV isn't formatted properly for both of your issues. Magmi is very particular about how the file is formatted. You definitely don't want to add extra any quotes into the cell if you're using Excel. You also may be better off using a tab delimited file per the method described here: https://understandinge.com/forum/all-things-coding/importing-a-tab-delimited-file/...

monalisa dengre posted a comment on ticket #111

And this is the multiselect attribute - "+0.75,+1,+1.25,+1.5,+1.75,+2,+2.25,+2.5,+2.75,+3,+3.25,+3.5,+3.75,+6" my csv is correct.

monalisa dengre posted a comment on ticket #111

I did exactly what mentioned on site but nothing is happening even I choosed "Value_Trimmer_for_select/multiselect" .. It is showing "Invalid category ids found for sku " , if I put categories instead of category ids then it shows that it imports all the sku but admin is not updateing with new products.. Are you working with a developer or do you have the need for one? - I am developer.

Ryan modified a comment on ticket #111

Well the mode depends on whether you're updating existing SKUs or Adding new ones. It may be skipping items because you already have them added. And the first option by default is set to "Update existing items only, skip new ones". Set it to the second -or- third option depending on your needs.

Ryan posted a comment on ticket #111

Have you read over all of the wiki page on the subject carefully? http://wiki.magmi.org/index.php/Magmi_Behaviour_-select%26_multiselect_attributes The bottom of the page discusses multi-select attributes. Make sure you're only using a comma between options and no spaces (unless you're using the value trimmer plugin mentioned below). It's also possible that your CSV isn't formed correctly. It could be interpretting your comma-seperated multi-select values as different columns. For example, if you're...

Ryan posted a comment on ticket #111

Well the mode depends on whether you're updating existing SKUs or Adding new ones. It may be skipping items because you already have them added. And the first option by default is set to "Update existing items only, skip new ones". Set it to the second on third option depending on your needs.

monalisa dengre posted a comment on ticket #111

It is not working for multiselect attribute .. Any help??

monalisa dengre posted a comment on ticket #111

Hi , What mode should I select , as I am doing exactly what you mentioned in the steps , infact I upgraded the version to 7.21 but I am still facing the issue.. When I import the csv the it says Skipped 6 records that means nothing is updated.

Ryan modified a comment on ticket #111

Upload the files you would like to process to directory 'var/import' then refresh magmi's page Select it in the drop-down under File to import in the section for Data Sources. CSV Datasource should be selected. Save the Profile by clicking the button at the bottom of the page. Select the Mode at the top and click Run Import If you're new to Magmi, carefully read over the wiki page because you'll want to understand all the options and be sure to secure it properly. Otherwise you can easily expose...

Ryan posted a comment on ticket #111

Upload the files you would like to process to directory 'var/import' then refresh magmi's page Select it in the drop-down under File to import in the section for Data Sources. CSV Datasource should be selected. Save the Profile by clicking the button at the bottom of the page. Select the Mode at the top and click Run Import If you're new to Magmi, carefully read over the wiki page because you'll want to secure it properly otherwise you can easily expose your mysql credentials.

monalisa dengre created ticket #148

SQLSTATE[42S02]: Base table or view not found: 1146 Table 'staging.omcore_store' doesn't exist -

monalisa dengre posted a comment on ticket #111

I'm using Magmi v0.7.19 , it is throwing error - Upgrade/Upload function are disabled for security reasons and not allowing to import the csv . Any help would be appreciated !!!

Lee Yuen Wai created ticket #147

php 7.0: count(): parameter must be an array or an object that implements countable in magmi_mixin.php

Leo created ticket #146

1 SQLSTATE [42S02]: Base table or view not found: 1146 Table core_store does not exist

Aldin Bostan posted a comment on discussion Help

Hello, I'm using Magmi v0.7.20_git, with Magento ver. 1.9.2.1. I have an issue with product tags in the feed. If that field is filled, everything is ok, but if it's empty, the import crashes with a weird description: SQLSTATE[HY093]: Invalid parameter number: no parameters were bound This happens with each product that has no tags. The only way i found to get around this is if I provide "MAGMI_IGNORE" value to each product which does not have any tags. Can anyone tell me why is this happening and...

Brady Hutmacher posted a comment on discussion Help

I thought I'd just update this one. The problem was that I didn't have the short_description and description fields. Once I put those in they worked just fine.

Brady Hutmacher posted a comment on discussion Help

I am getting the following warning when importing and I'm not sure how to resolve it. It is an attribute for a plugin I use: Potential assignment problem, specific model found for select attribute => enable_gridcart_plugin(eav/entity_attribute_source_boolean) Any idea what values I'm supposed to use? It's a boolean value, but I have no idea how it's saved under the hood. Here is my csv: sku,name,attribute_set,type,store,simples_skus,configurable_attributes,apparelsizes,super_attribute_pricing,price,qty,is_in_stock,manage_stock,use_config_manage_stock,status,visibility,weight,categories,tax_class_id,thumbnail,small_image,image,media_gallery,,enable_gridcart_plugin,allowed_to_ordermode...

Brady Hutmacher posted a comment on discussion Help

Any ideas? Anyone?

Michael posted a comment on discussion Open Discussion

Hey, So something happened to magmi and now there's a load of errors and problems importing products. The erros: https://i.imgur.com/uSAar7b.png?1 https://i.imgur.com/HEENR65.png?1

Brady Hutmacher posted a comment on discussion Help

I have (finally) gotten my csv file working correctly. It imports simple products and then a configurable product, and the two are linked correctly. Everything appears to be functioning properly, but the product will not appear until I open and save it. From what I've read I should only have to reindex magento, but I've done that from magento's system > index management and using the command line. What am I missing? Do I need something else in my csv? I have tried both "Catalog / Search" and 4 as...

Brady Hutmacher posted a comment on discussion Open Discussion

Thank you for your quick reply. I cannot get this to work. I'm not sure if it's related to the above issue or not that's why I'm posting it here. With this csv I get an 1048 attribute_id cannot be null error when using the configurable product processors. Without the config processor it creates the product but it doesn't associate any of the simple products with the configurable product. "sku","attribute_set","type","super_attribute_pricing","configurable_attributes","apparel_sizes","name","price","is_in_stock","manage_stock","status","visibility","weight","tax_class_id","_media_attribute_id","qty"...

Sebastien Bracquemont posted a comment on discussion Open Discussion

hi, First i would advise you to use the github repository to have the latest magmi version. see: https://github.com/dweeves/magmi-git Then, you are missing the "store" column which has to be set with the "store view" code, or you may use the "default values" plugin to set the "store" value with the appriopriate store view code automatically out of the csv. Also, i think you could look at this video: https://understandinge.com/course/importing-products-magento/ Thanks for using magmi :)

Brady Hutmacher posted a comment on discussion Open Discussion

I just discovered Magmi and I love it. I am trying to get it to work with our products. The csv I havge generated adds the products and seems to do everything correctly, but they do not show up on search or catalog. BUT, if I open one and make no changes at all and just save it, it shows up. Any idea why this would be happening? I believe I have the basics that I need. Here is my csv file: "name","sku","status","visibility","price","tax_class_id","manage_stock","is_in_stock","weight","attribute_set","type","categories","qty","url_key","short_description","description","image","small","thumbnail","super_attribute_pricing"...

Robert Behnke posted a comment on discussion Help

I have 3 views - Default (Admin), Retail Store, and Wholesale Store. There is never an instance where i want the images to be different in any view. But I cannot use Magmi to import to the Default store and get the other two stores to always use the default value. I to go into each SKU and do it manually (attached). Alternatively, i can load 3 rows for each sku (one for each view), but then if i want to make any manual updates, i have to do each individually. We have 2000 sku's. My columns are store,...

Komo Rebi modified a comment on discussion Help

Hello there, I have a question for you masters. So after weeks of struggling setting everything up in Excel for Magento to digest my database correctly, I am stuck because of the configurable products. I input the same attribute_set for both simples and configurable product, though when I upload the csv, the products do show up in the list but don't get associated. So I go to the "Associated Products" section of the configurable product in the Admin panel and see NO products at all in the list. I...

Komo Rebi modified a comment on discussion Help

Hello there, I have a question for you masters. So after weeks of struggling setting everything up in Excel for Magento to digest my database correctly, I am stuck because of the configurable products. I input the same attribute_set for both simples and configurable product, though when I upload the csv, the products do show up in the list but don't get associated. So I go to the "Associated Products" section of the configurable product in the Admin panel and see NO products at all in the list. I...

Komo Rebi posted a comment on discussion Help

Hello there, I have a question for you masters. So after weeks of struggling setting everything up in Excel for Magento to digest my database correctly, I am stuck because of the configurable products. I input the same attribut_set for both simples and configurable product, though when I upload the csv, the products do show up in the list but don't get associated. So I go to the "Associated Products" section of the configurable product in the Admin panel and see NO products at all in the list. I...

jmanu created ticket #145

can not access magmi

Mahmoud ismail created ticket #144

Importing Problem via Magmi (dramatic reduction in performance)

Zotezo Tech posted a comment on ticket #143

Hi, Facing this error- PHP Fatal error: Uncaught DivisionByZeroError: Modulo by zero in /magmi/engines/magmi_productimportengine.php:1791 Stack trace:#0 /magmi/engines/magmi_productimportengine.php(1884): Magmi_ProductImportEngine->processDataSourceLine(Array, 0, 1512996941.0242, 1512996941.0242, 0, 0)#1 /magmi/inc/magmi_engine.php(447): Magmi_ProductImportEngine->engineRun(Array)#2 magmi/web/magmi_run.php(36): Magmi_Engine->run(Array)#3 {main} thrown in /magmi/engines/magmi_productimportengine.php...

Zotezo Tech created ticket #143

PHP 7 compatibility

JYOTI SINGH created ticket #134

Magmi is working at VPS hosting

Muhammad Zia Ur Rahman posted a comment on ticket #142

Hi Sebastien Bracquemont, looking forward to your best solution. Thanks & Regards, zia

Muhammad Zia Ur Rahman posted a comment on discussion Open Discussion

Hi Experts, looking forward to your best solution. Thanks & Regards, zia

Muhammad Zia Ur Rahman created ticket #142

Magmi CLI throwing error!!!

Muhammad Zia Ur Rahman posted a comment on discussion Open Discussion

Matt Ayres, i am facing issue while updating products via CLI, can you please help me out regarding CLI updating prducts issue. Command: php magmi.cli.php -profile=Price Update -mode=update -CSV:filename="/path/xyz.csv" Error: PHP Fatal error: Call to a member function getRecordsCount() on null in /path/magmi/engines/magmi_productimportengine.php Regards Zia

Sebastien Bracquemont posted a comment on discussion Open Discussion

Hi, try defining "magento directory" setting with absolute path. it should help CLI finding the images. 2017-11-13 13:14 GMT+01:00 Matt Ayres liltbrockie@users.sf.net: Hi there.... I have succesfully run CLI to update products... this works The config will also import images when sued from the web UI BUT the CLI will not update the image (in face it deletes the image created by the webUI so i suspect its not finding the image?) can post config if required but its all pretty standard... Like I say...

Matt Ayres created ticket #141

CLI not importing images

Matt Ayres posted a comment on discussion Open Discussion

Hi there.... I have succesfully run CLI to update products... this works The config will also import images when sued from the web UI BUT the CLI will not update the image (in face it deletes the image created by the webUI so i suspect its not finding the image?) can post config if required but its all pretty standard... Like I say the web UI imports the image from default "media/import" but when run from the CLI it does not.

Mauro BigBlack posted a comment on discussion Open Discussion

Hi, I'm trying to update my store products with magmi. I succed to import about 2500 product in the first import and all work fine. Now I'm trying to update with the same file description, and sku associations, and nothing seems to happen. Do you know what can I try? I need to delete all products and import them again? O there can be something that make my magento not update? I've yet deleted all caches and supercache and reindexed many times. Some ideas? Thank you!

Fabrisys posted a comment on discussion Help

Hello to all I need help with this problem: I upload the articles on magento through Magmi v0.7.22 and associate the images to the product through the plugin "Value replacer", because sku and images have the same name: {item.sku}.jpg. Until here everything is fine. It happens that I have some sku with the character / (slash) in the sku, for example: 23df.124/rpo and obviously I can not give the same name to the image. Can you give me a suggestion on how to solve this problem? Thank you and apologise...

Jeeva posted a comment on discussion Open Discussion

How can i import images using by magmi for my multi store Magento? As a single store its working fine, after added additional store, magmi image not working. csv screen shot : https://snag.gy/Ju6MbK.jpg if i did any error, pls let me know and demo CSV sheet.

Imad Ka posted a comment on discussion Open Discussion

if (!is_array($skulist) || !count($skulist) || !isSet($pid)) return false; This seems to fix some error.

Daniel Feenstra posted a comment on discussion Open Discussion

Hello, Is this extension for magento 1 or for magento 2? I'm looking for good import extension for magento 2. Daniel

adaq posted a comment on discussion Help

Hi, getting following error when importing: 1 SQLSTATE[42000]: Syntax error or access violation: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'AS ea WHERE ea.entity_type_id = '4'' at line 2 - Where do i start?

Anagha posted a comment on discussion Open Discussion

Hello How can I associate new simple products to an existing magento configurable product via Magmi.The configurable product already has some simple products associated to it and I want to associate several more simple products but instead magmi is deleting all previously associated products and only leaves newly associated products. Example of my csv layout : sku,simples_skus,configurable_attributes,type 5078940494,"59959,57859","color,size",configurable In magento I already have 4 simple product...