Re: [Madwifi-users] Atheros AR5212 + madwifi-bsd + k. 2.6.11.6 + WPA: success (mostly :)

[Luca O. <lu...@ve...>]

En/na Luca Olivetti ha escrit:
> En/na Paolo ha escrit:
> 
>> Also I cannot get up to full 54Mbps: I can force rate to 54Mb but 
>> actual rate isn't there, not even according to advertised 36Mb, I get 
>> 2112 MB/s
>> when wget'ing a ~50MB file through the channel.
> 
> 
> 2112 it's awfully good ;-) I supposed you meant 2 something Mbps?
> That's too low, I achieve ~8Mbps under windows connected to a commercial 
> access point and ~15Mbps with a madwifi ap under linux *but* (as I said 
> in another thread) with an older hal.

Correction: the ~8Mbps figure under windows is with a bidirectional 
sustainted transfer (done with "iperf -d").  With an unidirectional 
transfer I also achieve ~15Mbps under windows.

Bye
-- 
Luca